Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coconut Grove
Gate repair in Coconut Grove usually costs between $180 and $1,400 depending on what failed. A hinge or post problem runs $180-$650. A bad control board or motor on a Coconut Grove Gate Motor & Opener runs $350-$1,200. Most repairs happen same day or next morning. If you’re off Main Highway, off Ingraham Highway, or back in one of the older Grove streets near the bay, call (877) 610-2993 and a live person picks up – that’s Hal or one of his crew, not a recording.
We’ve been fixing gates in Coconut Grove long enough to know the neighborhood’s quirks. The trees here are relentless. The salt air is relentless. And half the driveways in this village were built when cars were narrower and gates swung on coral-rock columns poured before Eisenhower. You need someone who knows what those conditions do to a gate. That’s what our Gate Repair crew does.
Why Gatewood Fence & Gate Is Coconut Grove’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 and his name is still on the door. There’s a published address, a license number anyone can look up, and a 90-Day Done Right Promise stamped in writing on every job. If it’s not right, one call brings him back. No runaround, no “you must have hit it with your car” deflection.
Our reputation in Coconut Grove comes from a repair-first mindset. Other companies in South Florida will quote you a full gate replacement the moment they see a rusted hinge or a dragging panel. We weld on site. We reset posts. We replace the part that failed and leave the parts that didn’t alone. That’s not a gimmick. It’s why a lot of our work in the Grove comes from neighbors telling neighbors.
Call (877) 610-2993 and a live person answers. Not a voicemail, not a call center three states away. Hal or someone who knows gates picks up. We coordinate scheduling from our Miami office and crews serve Coconut Grove locally – so when we say we’ll be there in a window, that’s a real window.
Our Gate Repair Services in Coconut Grove
Electric Gate Repair
When the keypad goes dead or the gate stops responding to the remote, the problem is usually Gate Access Control in Coconut Grove failure involving the control board, a limit switch, or a corroded wire connection. In Coconut Grove, the salt air off Biscayne Bay accelerates wiring insulation breakdown – we regularly find wires that look fine outside but are green and crumbling inside the jacket within three or four years. We troubleshoot the whole circuit, not just the part that buzzes. A board replacement on a DoorKing or LiftMaster typically runs $350-$650, and we quote the price before we touch anything.
Automatic Gate Repair
This covers the operator, the arm, the safety photocells, and the entrapment sensors. Miami-Dade’s summer thunderstorms send power surges straight into gate control boards – surge protectors on the branch circuit get fried first, then the board itself. We install surge-protected retrofits and battery backups for Coconut Grove homeowners who want the gate to still work when Florida Power & Light is having a bad afternoon. If the gate throws a fault code, that’s usually a sensor misaligned by a shifted post or a root pushing against the track.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle – and that’s where we start. In Coconut Grove, the roots do most of the damage. Ficus and banyan roots push concrete footings out of level, the hinge side drops, and the latch side drags on the pavers. Fix the panel without the post and you’ll fix it twice. We cut and rebuild the footing, reset the post, and sometimes Coconut Grove Gate Parts & Welding a new hinge bracket while the gate stays in your driveway. Typical post reset in the Grove runs $450-$1,400 depending on whether we’re pouring a deeper footing or just pulling and re-plumbing the existing one.
Gate Realignment
Most “broken gates” in Coconut Grove are actually just out of level. The hinges look fine, the post looks fine, but the gate drags at the latch side and the automatic opener faults on the safety sensor. That’s a realignment job. We raise or shim the gate, adjust hinge spacing, and re-level the post if it’s moved. A realignment without a post replacement usually runs $180-$400 and takes a couple hours. With a post reset, figure more like the $450-$1,400 range above.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Grove
We service all nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing – the ones you’ll find on most Coconut Grove properties, old and new. We stock parts and boards locally through the Miami office, so most automatic opener repairs in the Grove don’t wait on a backorder. If the operator is ten years old and obsolete, we’ll tell you straight and show you the replacement options with pricing before any work starts.
Common Gate Repair Problems We See in Coconut Grove Homes
- Post heave from tree roots. The ficus and gumbo-limbo trees along Main Highway and throughout the Grove push concrete gate post footings out of level within a few years. A gate that starts dragging for no apparent reason usually has a root under the hinge post.
- Salt-air hinge and track corrosion. Homes within a few blocks of Biscayne Bay see hinges, rack-and-pinion tracks, and motor housings rust faster than anywhere else in Miami-Dade. We replace with coastal-grade stainless or marine-coated hardware.
- Thunderstorm surge damage. Summer lightning hits nearby transformers and sends a spike through the gate circuit. The control board fries, the keypad goes dark, and the gate sits open until someone installs a surge-protected retrofit.
- Original hardware on century-old gates. Some of the oldest estates in Miami are right here, with wrought-iron driveway gates from the 1920s and 1930s hanging on original hinges set in coral-rock columns. We repair and preserve those gates, including on-site welding for cracked scrollwork and rusted rails.
Pricing for Gate Repair in Coconut Grove, FL
Here’s what Coconut Grove homeowners can expect to pay for the most common repairs. A basic hinge replacement runs $180-$350. Gate realignment without a post reset runs $180-$400. Replacing an automatic opener control board runs $350-$650. Full post reset with new concrete footing runs $450-$1,400. Weld repair on a sagging wrought-iron gate runs $200-$600 depending on the crack length and access.
The price is quoted and agreed before any work starts. No trip charge inside the county. Standing offers: $40 off any repair over $200, a permanent 10% discount for seniors and veterans, and a free second opinion on any written estimate from another company. Call (877) 610-2993 for a number specific to your gate.
We Also Serve Cities Near Coconut Grove
Our crews work throughout the southern Miami-Dade corridor. If you’re in Coral Gables, Glenvar Heights, South Miami, or Coral Terrace and need an honest gate repair done right the first time, call us. Same Gate Repair in Coconut Grove standards apply – upfront pricing, on-site welding, and the 90-Day Done Right Promise on every job.
Serving Coconut Grove, FL - Our Local Coverage Area
We’re based in the Coconut Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Coconut Grove
The hinge-side post has almost certainly been lifted by tree roots. Ficus and banyan root systems push concrete footings up an inch or more within a few years, and the whole gate tips out of level. The hinges look fine because they are fine – the post is the problem. We reset the post and realign the gate, typically $450-$1,400. Call (877) 610-2993 for a free estimate.
Yes, and we do it often. Many older Grove homes have tight driveways with no room for a swing gate to arc. A slide gate runs parallel to the fence line and fits a much tighter footprint. We measure, spec the track and operator, and give you a written price before ordering anything. Free measure, free estimate.
Salt-laden humidity attacks the motor housing, the limit switches, and the wiring connections. Within three to five years, the cover rusts, terminals corrode, and the control board starts throwing phantom fault codes. We replace with coastal-grade hardware and seal the connections. No point patching it with the same parts that just failed.
Very common. Miami-Dade thunderstorms cause power surges that fry control boards, especially on older operators without surge protection. The keypad goes dark and the gate stays locked open. We install a surge-protected retrofit and replace the board, usually $350-$650. Call (877) 610-2993 and we’ll get someone to your Grove home today or tomorrow morning.
Yes, and not just because code requires it. Entrapment protection means safety photocells near the gate’s leading edge and a reversing mechanism on the operator so it stops and reverses if it meets resistance. The mangrove-shaded walkways and tight side yards common in the Grove mean small children and pets pass through the gate arc every day. If your gate lacks working sensors or the reverse function, we can bring it up to standard during a single service call.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coconut Grove and southern Miami-Dade since 2001. Call (877) 610-2993 for a free estimate – a live person answers.