Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Clovis
Gate installation in Clovis usually costs $1,400 to $4,800 for a standard driveway gate, with RV-width double swing gates landing between $3,200 and $7,500 depending on steel gauge, operator brand, and footing work. Most jobs take one to three days once materials arrive, and we quote the full price in writing before any work starts. If you live anywhere from the established neighborhoods off Shaw Avenue to the newer tracts snaking through 93619 along De Wolf and Locan, you want a crew that already knows what’s under the surface here. That’s us. Call (877) 610-2993 and you’ll get Hal or someone from his crew on the phone.
Why Gatewood Fence & Gate Is Clovis’s Preferred Gate Installation Company
Hal Gatewood has been owner-operating Gatewood Fence & Gate since 2001. The name is on the shop, the license number is published, and the phone rings to a live person at 3 a.m. the same way it does at noon. Clovis homeowners don’t need a national call center reading from a script. They need someone who knows that the soil on the east side of town near the Clovis East High area isn’t the same as what you’d hit over by Sierra Vista Mall.
We don’t just sell gates. We know the HOA landscape in Clovis, particularly in covenant-heavy tracts where the ARC committee wants a specific finish and post style, and we quote accordingly. A gate installed right has to clear the pad, drain correctly, cycle true through a Valley heat wave, and survive Tule fog without rusting through the hinges. Clovis customers tend to call us after a builder gate fails, and we hear the same story: it worked for two summers, then it didn’t. That’s not bad luck. That’s undersized hardware on undersized footings. We fix the cause, not the symptom.
Our promise is simple and it’s in writing on every job: if it’s not done right, we make it right. The 90-Day Done Right Promise isn’t fine print. One call brings Hal back. No runaround.
Our Gate Installation Services in Clovis
Driveway Gate Installation
A new driveway gate in Clovis has to hold up to 105°F steel expansion and the load of a 14-foot gate swinging on hinges planted in clay-heavy hardpan. We set posts deep, shim where the decomposed granite has shifted, and size the operator for the actual gate weight, not the brochure number. Most driveway gates here run 12 to 16 feet wide, which rules out the light-duty residential kits sold at big box stores.
Pedestrian Gate Installation
Pedestrian gates in Clovis are often the afterthought: a narrow side gate leading to the pool equipment or the garbage run. But a sagging pedestrian gate is still a security gap and a daily annoyance. We build them with self-closing hinges and a latch that actually catches, then align the post so it stays that way through summer heat and winter fog.
Sliding Gate Installation
For long driveways with a straight fence line, a sliding gate saves space and handles the weight of an RV-width opening without the swing arc eating into your yard. In Clovis, a sliding gate needs a solid track bed because the hardpan here shifts. We won’t float a track on decomposed granite and call it done. We compact, bed it properly, and make sure the gate rolls true in August.
Swing Gate Installation
Swing gates are what most Clovis homeowners picture: two hinged panels swinging inward off the RV pad. The problem is always the hinge post. Over years, a post set in shifting soil leans, and the gate drags at the latch. We replace the footing when we install, which is the difference between a gate that laches clean for a decade and one that needs shimming every September.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We install and service operators from DoorKing, LiftMaster, Viking, FAAC, and Ghost Controls, among others. The brand matters less than the sizing and the install, but when a Clovis customer wants a specific brand on an HOA gate, we spec it right. After 29 years in the gate trade, Hal knows which operators hold up under Valley heat cycles and which ones are fine for a light pedestrian gate but wrong for a 16-foot steel double swing. We carry common parts locally so a repair call doesn’t mean waiting three weeks for a discontinued logic board.
Common Gate Installation Problems We See in Clovis Homes
- Post footings set in decomposed granite over hardpan. Clovis’s newer HOA tracts often backfill with decomposed granite that drains differently than native clay. When the hardpan beneath shifts during summer heat, the post moves with it. A gate aligned in April drags by August. We shim and check every post on every install.
- Builder-grade operators undersized for RV gates. Builders install what’s cheap and meets the minimum. A 14-foot steel dual swing needs an operator rated for the actual weight, not a residential kit off the shelf. Those fail within a few summers, usually at the worst possible time.
- Automation added later without conduit or power run. The gate went in manual when the house was built. Now you want a keypad or a phone app. In Clovis, we regularly see exposed wiring zip-tied to a fence post because the conduit was never run during construction. That fails inspection and shorts in the first rain.
- Rust from Tule fog on hinges and spring latches. Clovis sits right in the San Joaquin Valley fog belt. Weeks of sustained ground fog in winter leave moisture on metal hardware that hasn’t been coated properly. Hinges rust, springs seize, and the dry summer heat cracks what the fog started.
Pricing for Gate Installation in Clovis, CA
Here’s what you should expect to pay for gate installation in Clovis, based on the gates we’ve built in 93611, 93612, 93613, and 93619: a single 4-foot pedestrian gate typically runs $650 to $1,400 installed. A standard 12-foot driveway swing gate runs $1,800 to $3,400 without automation. An RV-width double swing gate, 14 to 16 feet, runs $3,200 to $7,500 including a properly sized operator. Sliding gates run $2,600 to $6,500 depending on track work and motor type. Footing replacement, conduit runs, and HOA-mandated finishes add to the number, and we quote all of it before we start. The price we agree on is the price you pay. Senior and veteran customers get a permanent 10% discount, and we’ll give you a free second opinion on any written estimate from another company. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Clovis
If you’re outside Clovis proper but still in the central Valley, we cover the surrounding area: Clovis neighbors like Fresno, Old Fig Garden, Sanger, and Fowler all fall inside our regular service radius. Our Gate Installation crew runs the same trucks and the same owner-operated standards across this whole stretch of the Valley.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Clovis
Because the soil under your new gate is decomposed granite over hardpan, not the undisturbed clay you’d find in an older part of town. The hardpan shifts with summer heat, and a post set level in April can be out of plumb by August. We shim posts at install as standard practice on Clovis’s eastside tracts, and we check them on every subsequent service call. If your gate starts dragging before the first year is up, call (877) 610-2993 and we’ll come align it under the Done Right Promise.
Yes, and it’s one of the most common requests we get from homeowners in Clovis’s newer neighborhoods. The catch is that the conduit and power run almost always has to be added, because builders rarely stubbed one out at the gate post. We trench a proper conduit run, pull the wire, and hardwire the operator so you don’t have exposed cables running along the fence line. Some Clovis HOAs require the automation equipment to be hidden or the keypad mounted at a specific height, so we confirm that with the ARC before we start.
This varies tract by tract, but many Clovis communities mandate specific steel finishes, post caps, and swing direction. Some require a powder-coated black over tubular steel; others want a specific brands of operator so the hardware looks uniform across the streetscape. The gate style affects the post sizing and the operator load. We’ve installed gates in enough Clovis HOAs to know which questions to ask, and we’ll pull the exact ARC spec before we pour any concrete.
Summer heat is harder on Clovis gates than winter fog. The steel frame expands, and the operator’s clutch or limit switches get out of adjustment. The real issue is usually the ground: as the hardpan dries and shifts, the gate posts move, and the operator then has to fight a gate that doesn’t hang true anymore. That’s why every install we do in Clovis includes a post and footing check, and why we we won’t just replace a burned-out operator without checking the alignment underneath it.
If you want the gate to open automatically when a car pulls up, you need a loop detector. If you want it to open only for you and your family, a keypad or a phone app works. Most RV gates in Clovis use both: a loop to open automatically from inside, a keypad for entry from the outside. We’ll factor the conduit and wiring for both into the quote, so you’re not trenching the same path twice.
Call Gatewood Fence & Gate for Gate Installation in Clovis
We work all over Clovis: 93611, 93612, 93613, and 93619. From the established blocks off Barstow and Shaw to the new construction pushing east past Clovis East, we’ve built and repaired gates in every kind of soil this city has. Call (877) 610-2993 for a free estimate on gate installation in Clovis. You’ll get a person on the line, not a recording. The price we agree on is the price you’ll see on the invoice, and the 90-Day Done Right Promise is written on every job we do. Hal Gatewood’s name is on the shop, and if you want, you can drive over and look him in the eye before you sign anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Clovis since 2001.