Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Clovis
Gate access control in Clovis, CA typically costs $450-$1,850 for a complete keypad or card reader installation, while a service call for an existing system that won’t respond usually runs $120-$280. Most repairs are completed the same day or next morning, and our crew is already working in Clovis neighborhoods from Harlan Ranch to Deauville every week. You call (877) 610-2993, Hal or someone from his crew answers, and we’ll give you a straight quote before we touch a wire. No dispatch board. No phone tree. Just a live person who knows gate hardware.
We’re Gatewood Fence & Gate, and we’ve spent over two decades working on gates across the Central Valley. Clovis is different from other cities we serve. The HOAs here are stricter, the lots are bigger, and the gates are usually tied into a shared driveway or an RV pad. That changes how we diagnose every access control problem. We are the Gate Access Control team that shows up with the right keypad, the right operator, and enough on-site welding gear to fix the post rather than replace the whole system.
Why Gatewood Fence & Gate Is Clovis’s Preferred Gate Access Control Company
Hal Gatewood has been owner-operated since 2001. His name is on the shop, his address is published, and his license number is there for anyone to look up. That matters in Clovis, where homeowners have been burned by Gate Repair in Clovis companies that quote one price on the phone and show up with a different invoice. We don’t work that way. The quote you get is the price you pay, agreed before any work starts.
Our Clovis customers call back for the same reasons. A live person answers the phone 24 hours a day, seven days a week. The person who shows up in the driveway is background-checked and uniformed, not a random subcontractor. And every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back himself. That’s the whole guarantee, plain on the invoice, not buried in fine print.
We also work with Clovis HOAs directly. If your neighborhood requires a specific keypad model, a certain access log format, or a particular finish on the gate hardware, we handle that compliance layer before it becomes a violation notice. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, but the crews serving Clovis live close enough to know the difference between a 93611 tract home and a 93619 eastside estate lot.
Our Gate Access Control Services in Clovis
Keypad Entry
Keypad entry systems in Clovis run the full range from a simple four-digit unit on a side yard gate to HOA mandated linear-style keypads on shared driveway gates. The 93619 and 93611 corridors are full of neighborhoods where the HOA specifies exactly which keypad belongs on the gate. We stock common DoorKing, LiftMaster, and Linear models so we can match what your HOA wrote into the CC&Rs, not what’s cheapest on a shelf. A typical keypad replacement or our Gate Installation in Clovis runs $280-$650 depending on the model and whether we need to pull new wire through a block wall.
Remote Control
Remote control access means the clicker, the receiver, and the operator all need to talk to each other. In Clovis, we see plenty of multi-button remotes programmed for a shared driveway gate plus a separate RV gate on the same property. Programming a new remote usually runs $75-$150, and we can match nearly any major brand. If the receiver board is failing, we replace the board rather than the entire Gate Motor & Opener - Clovis whenever the rest of the unit is still solid.
Phone Entry
Phone entry systems let you buzz open a gate from your cell phone or landline without leaving the house. These are common on Clovis properties where the pedestrian access is a long walk from the main gate, or where an HOA wants a call log of who entered and when. Installing a phone entry module on an existing operator runs $350-$800 in Clovis depending on the operator brand and whether we need a dedicated phone line or can use a cellular dialer.
Card Reader
Card readers are standard on the larger Clovis properties, especially in east and southeast Clovis where a property may have a main gate plus a pool-area gate. We install and service proximity readers, magnetic stripe units, and the newer encrypted fob systems. A single card reader install runs $400-$900. If you have tenants, Airbnb guests, or a shared driveway with a neighbor, a card reader gives you an access log that a clicker can’t. We also service the card readers already installed on Viking, Ghost Controls, and DoorKing systems throughout Clovis.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We’re certified to service nine major gate brands, and in Clovis the ones we see most often are LiftMaster, Viking, Ghost Controls, and DoorKing. We keep common keypads, receiver boards, photocells, and remotes stocked so a repair call in 93619 doesn’t turn into a week-long wait for a part. If your operator is a FAAC or a BFT on a custom swing gate, that’s in our wheelhouse too. The point is that we fix what’s there unless it’s genuinely beyond saving, and we weld on site so a broken hinge bracket doesn’t mean hauling your gate to some shop across town.
Common Gate Access Control Problems We See in Clovis Homes
- Shared driveway gate lockouts. Two homes share a keypad-controlled gate, someone adds or changes a code, and the neighbor gets locked out. In Clovis, that triggers an HOA complaint faster than a broken gear. We fix the access coding, re-sync the keypad to the operator, and verify the safety photocells still pass UL 325 testing.
- Clay soil post heave throwing off the keypad mount. After a 105°F Clovis summer, the hinge post on a swing gate shifts in the clay footing. The gate drags against the keypad mount, breaking the seal, and then winter Tule fog moisture gets into the control board. We shim the post, reset the latch, and reseal the enclosure.
- Restricted working space on the control box. A gate access control box mounted tight against a block wall or fence line, especially in older 93611 tract homes, sometimes leaves no room to swing a tool or see the wiring. A simple keypad swap can require pulling the whole operator enclosure. We’ve done enough of these in Clovis to do it without scratching the stucco.
- Summer heat expansion and afternoon failures. A gate that opens fine in the morning and drags by 3 p.m. is often not a motor problem. The steel frame expands in 105°F heat and the latch alignment shifts just enough to trip the operator’s obstruction sensor. We check post plumb and hinge wear before we blame the electronics.
Pricing for Gate Access Control in Clovis, CA
Here are straight numbers for the Clovis market. A basic keypad replacement runs $280-$650. A card reader install runs $400-$900. A phone entry module runs $350-$800. A video intercom for a driveway gate runs $750-$1,850 depending on the monitor and camera package. Service calls for a system that won’t respond run $120-$280. If the call turns into a larger repair, we quote the full job before any work starts. And Clovis customers get our standing offers: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote, free.
We Also Serve Cities Near Clovis
Our crews run service across the whole Central Valley. Beyond Clovis, we work in Gate Access Control in Clovis neighboring communities like Fresno, Old Fig Garden, Sanger, and Fowler. If you’re in one of those cities with a gate access control problem, same story applies: live answer, straight quote, work done right the first time.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Clovis
Yes, if your HOA has written that model or its equivalent into the CC&Rs, you need to match it. Clovis HOAs in the 93619 and 93611 corridors routinely specify linear-style keypads and particular finishes, and an annual access-control audit will flag a mismatched unit. We can pull the HOA spec, match the model or a fully compatible equivalent, and install it so the neighborhood audit passes. Call (877) 610-2993 and we’ll help you sort out what your HOA actually requires before you buy anything.
The most likely cause is heat expansion in the steel gate frame. During a 105°F Clovis afternoon, the metal expands enough to shift the latch out of alignment, and the operator’s obstruction sensor cuts the open or close cycle. It’s usually not the motor. The fix is checking the post plumb, shimming the hinges, and verifying the operator’s travel limits, which we do as part of a standard service call, typically $120-$280 in Clovis.
Yes. Twelve feet of clearance is workable, though it’s tight. The keypad normally mounts on a pedestal or the gate’s steel frame, and we run the low-voltage wire along the fence line or through conduit to the operator. We’ve done this exact install on side-yard RV gates across east Clovis, including narrow lots in the 93619 area. The free estimate covers the wire run and the mounting location, so there are no surprises when we show up.
Tule fog deposits several weeks of sustained moisture on the gate hardware, and on a keypad the failure is almost always oxidized contacts inside the sealed keypad enclosure. The fog moisture works its way through a worn seal, corrodes the button contacts, and the keypad stops registering codes. We replace the keypad with a sealed unit, inspect the wiring terminations for corrosion, and reseal the enclosure. In Clovis, a typical replacement runs $280-$650 depending on the keypad model.
Clovis does not have a citywide ordinance requiring video intercoms on shared pedestrian alley gates, but your HOA may require one under its own rules. Some newer neighborhoods in the 93619 area specify video intercom as part of pedestrian access control for alleys and shared walkways. The right move is to check your CC&Rs before installing anything. If video is required, we install and service video intercom systems from $750-$1,850 in Clovis, with a free quote before any work starts.
Get Your Gate Access Control Working in Clovis Today
If your keypad won’t accept codes, your card reader stopped reading, or your phone entry system has gone silent, call (877) 610-2993. Hal or one of his crew will answer. We’ll ask what’s happening, give you a straight number over the phone if we can, and show up when we say we will. Every job in Clovis carries the 90-Day Done Right Promise, and the price is set before we start. That’s the only way we’ve done business since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Clovis and the Central Valley since 2001.