Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Banning
Gate installation in Banning isn’t a side job for us. It’s what we do every day, and the San Gorgonio Pass wind changes everything about how a gate should be built here. A new driveway gate in Banning typically runs $2,800 to $8,500 installed, depending on whether it’s a sliding or swing configuration, the operator size, and how much post reinforcement the wind demands. Call us at (877) 610-2993 and we’ll come out, walk the site, and hand you a written price before any work starts.
We’re Gatewood Fence & Gate, and Hal Gatewood has been running this shop since 2001. When we install a gate in Banning, we plan for the pass winds on day one, not after the first service call. That’s the difference between a gate that lasts twenty years and one that’s sagging by spring.
Why Gatewood Fence & Gate Is Banning’s Preferred Gate Installation Company
We live and work in this same wind corridor, so we know what a Banning gate actually endures. The sustained 60 to 80 mph gusts that funnel through the San Gorgonio Pass between the San Bernardino and San Jacinto Mountains aren’t an occasional weather event. They’re the daily operating condition. We upsize post footings, spec commercial-duty operators on residential jobs, and do Gate Parts & Welding - Banning so frames hold their rack in the wind. That’s not upselling. That’s building a gate that won’t call you back for repairs in eighteen months.
Hal’s name is on the shop and on every invoice. Our published address means you can drive to the shop and look him in the eye if something isn’t right. We answer every call with a live person, 24 hours a day, and the person who shows up to your house is background-checked and uniformed, not a random subcontractor. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call, no runaround.
Banning homeowners have been calling us for years because we don’t do phone-price-to-door-price bait. The estimate we give in writing is the price you pay, and we quote it before any work begins. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
Our Gate Installation Services in Banning
For the full scope of what we build, see our Gate Installation services. Here’s what matters most in Banning specifically:
Driveway Gate Installation
Most Banning driveways on the older grid streets near downtown are mid-century ranch homes with block wall perimeter fencing and wrought iron or tubular steel gates. We install driveway gates that match that look, with post footings poured deeper than code because the wind will pull a shallow-set post loose within a few seasons. A typical single driveway swing gate in Banning runs $3,200 to $6,800 installed.
Pedestrian Gate Installation
We build pedestrian gates that swing square and stay square, even when they’re mounted on block pilasters that have already shifted. For Banning properties where the main driveway gate is motorized, a separate pedestrian gate keeps foot traffic from wearing out the operator. Expect $900 to $2,400 depending on width and hardware.
Sliding Gate Installation
This is the configuration we recommend most often in Banning, especially on shared driveways off San Gorgonio Avenue or anywhere a swing gate would cross a property line. Sliding gates handle lateral wind load far better than swing gates, because the track and rollers transfer force into the ground instead of the hinge post. Banning sliding gate installations typically run $4,500 to $9,500 with a commercial-duty operator sized for pass-wind conditions.
Swing Gate Installation
When a swing gate is the right call, we reinforce the hinge post with deeper concrete and larger diameter posts than a typical Inland Empire install. The dominant failure mode in Banning is the hinge post working loose under constant lateral load, which racks the gate out of plumb and eventually drags it on the ground. A properly reinforced double swing gate in Banning runs $3,800 to $8,000 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Banning
We’re certified to install and service Linear, Viking, DoorKing, and Ghost Controls, among others. In Banning, we lean heavily on Viking and DoorKing for their commercial-duty gearboxes, because consumer-grade motors fight the pass winds and lose. We stock common parts and operator components locally, which means a Banning customer doesn’t wait a week for a board to ship from a distributor. When you call Gatewood Fence & Gate, you’re talking to someone who can actually put hands on the part you need, today.
Common Gate Installation Problems We See in Banning Homes
- Hinge posts working loose from block pilasters. The constant pass-wind lateral load flexes a gate frame until the lag bolts in the masonry start to wallow. We set post footings deeper and use through-bolt or epoxy-set anchors instead of surface lags.
- Consumer-grade operators burning out gearboxes. We see this constantly. A motor rated for light residential wind exposure runs against near-daily gusts and strips its gears within a year or two. We spec commercial-duty operators as standard on Banning installs.
- Gate frames racked out of plumb. Wind hitting a closed gate pushes the leaf sideways. Without a reinforced post footing and a frame welded for rack resistance, the gate starts dragging and the latch stops aligning. Fix the panel without the post and you’ll fix it twice.
- Shared driveway access conflicts. On properties where two or three homes share one gate, someone’s opener or sensor always gets hit, and the gate stops closing properly. We install loop detectors and safety photocells so both households can come and go without stopping service.
Pricing for Gate Installation in Banning, CA
Nothing about Banning gate installation should be a mystery. Here are real ranges for this market:
- Pedestrian gate: $900-$2,400
- Single driveway swing gate (manual): $1,800-$3,600
- Single driveway swing gate (automated, reinforced posts): $3,200-$6,800
- Double swing gate (automated): $3,800-$8,000
- Sliding gate (automated, commercial-duty operator): $4,500-$9,500
- Security gate with access control: $6,000-$14,000
The biggest cost drivers in Banning are operator size, post footing depth, and whether existing block pilasters need reinforcement or replacement. We quote a written price before any work begins, and there’s no trip charge inside the county. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Banning
We work throughout the San Gorgonio Pass and surrounding communities. If you’re in Beaumont, Cherry Valley, Calimesa, or San Jacinto, the same crew serves your area. For a full look at how we serve the Banning area specifically, visit our Gate Installation in Banning page. Or read about our broader Gate Installation work across the Inland Empire.
Serving Banning, CA - Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Banning
Yes, and it’s not close. A sliding gate transfers wind load into the track and ground, not the hinge post. For Banning properties where the wind hits a closed swing gate broadside for hours at a time, the hinge post eventually works loose no matter how well the original install was done. If you have room for a sliding gate’s track run, it’s usually the longer-lasting option here for Banning Gate Access Control. Call (877) 610-2993 and we’ll tell you honestly which configuration fits your lot.
We build it in place and leave the old gate functional until the new one is ready to be hung. On a shared driveway off San Gorgonio Avenue, we set the post footings deeper than code, upsized to a Viking commercial-duty operator, and paired it with a loop detector plus safety photocells so both households could come and go throughout the entire job. No house gets locked out, and no one waits on a service window. Call (877) 610-2993 to schedule a walkthrough.
Yes, if the operator is sized correctly. The problem isn’t the solar panel, it’s the motor. A solar-powered Ghost Controls or Viking unit with a commercial-duty gearbox and a properly sized battery bank will run fine, even during the dust and wind season. What fails is putting a light-duty residential motor on a solar setup and expecting it to fight the pass winds. We spec the operator for the wind load, then size the solar array to keep it fed. Call (877) 610-2993 and we’ll spec your site.
Because the San Gorgonio Pass wind forces the motor to work against continuous lateral load every time the gate cycles. A motor that would last a decade in Redlands or Yucaipa fights shoulder-high gusts on every open and close in Banning. That’s why we install commercial-duty Viking and DoorKing operators even on residential driveways here. It costs more up front and saves you a replacement every few years. Call (877) 610-2993 for an exact quote, free of charge.
Absolutely. Most Banning homes have block wall pilasters at the driveway entrance, and the gate frame transfers wind load directly into that masonry. Without a reinforced post footing and proper anchoring, the pilaster cracks at the jamb and the whole gate sags. We through-bolt or epoxy-set anchors and pour deeper footings so the post stays put. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 and Hal will come look at your site himself.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Banning and the San Gorgonio Pass since 2001.