Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Augusta
A gate installation in Augusta, KS typically runs $1,400 to $6,800, depending on whether we’re hanging a 16-foot ornamental driveway gate in town or a 20-foot steel pipe gate out on a ranchette south of the Whitewater River. Most jobs are quoted upfront and scheduled within five to seven business days. Call (877) 610-2993 and a live person answers, any hour.
We know Augusta’s gates because we work on them every week. The in-town subdivisions off Kelly Avenue and State Street have ornamental steel and aluminum gates that look sharp and run quiet. The acreages east of town toward El Dorado and south toward Douglass? Those are a different animal entirely: wide pipe swing gates, ball-and-socket hinges, and clay soil that never fully dries. Hal Gatewood has been fixing and hanging both types since 2001, and the difference between the two matters more than most people realize.
Why Gatewood Fence & Gate Is Augusta’s Preferred Gate Installation Company
Around Augusta, a gate company earns its reputation one driveway at a time. Ours was earned the hard way: showing up when we said we would, welding on site instead of hauling a gate back to a shop, and standing behind the work with a written 90-Day Done Right Promise. If something isn’t right, one call brings us back. No runaround, no fine print.
Augusta homeowners tell us the same story again and again: a national outfit quoted a price on the phone, then added trip charges, “unforeseen” footing work, and parts markups when the crew arrived. We don’t work that way. The price Hal quotes is the price on the invoice, and it’s agreed to before the first weld or bolt goes in. His name is on the shop and on every job we do in 67010.
When you call Gatewood Fence & Gate, you get a live person, 24/7. Not a voicemail, not an automated menu. The person who answers can tell you when we can be in Augusta and what the job will likely involve. Scheduling for Augusta is coordinated from our Wichita office, and our crew is on the road to Butler County most days of the week.
Our Gate Installation Services in Augusta
We install all six of the gate types Augusta properties actually need: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. Below are the four we hang most often in this area, and why each one behaves differently here than in the suburbs around Wichita.
Driveway Gate
Driveway gates in Augusta’s older in-town neighborhoods often anchor into concrete that was poured during the oil-boom era or the mid-century ranch expansion. That concrete is frequently cracked or crumbling, which means a new gate hung on the old post is a gate that sags within a year. We re-plumb the post or pour new footings before we hang anything. For newer subdivisions off Diamond Road, installations are more straightforward, but we still check the post depth against Butler County’s freeze line.
Pedestrian Gate
A pedestrian gate next to a driveway or along a fenced side yard is straightforward work, but the details matter in Augusta’s climate. The same clay soil that heaves posts under driveway gates does the same to a 4-foot walk gate, especially when it’s hung on a fence line that’s been in the ground for thirty years. We’ll often find the latch misaligned because the post has shifted, not because the hardware failed. On acreage properties, we build heavy duty walk gates that can take wind gusts and the occasional push from a horse or mule.
Sliding Gate
Sliding gates make good sense on Augusta properties where a driveway slopes or where wind load would fight a swing gate every time it cycles. The south and southwest winds across Butler County, often sustained at 20 to 30 mph, push hard against a wide swing gate. A slide gate on a proper concrete track doesn’t fight the wind the same way. For long, flat runs along the ranchettes south of town, we install cantilever slides that work without a ground track, which means gravel and field debris don’t foul the rollers.
Swing Gate
Swing gates are the bread and butter of Gate Installation work across Butler County. In town, a single ornamental swing gate on a 10- to 12-foot driveway opening is clean work. On the acreages north and east of Augusta, we’re often hanging 16- to 18-foot pipe swing gates on ball-and-socket hinges. Those hinges sit in ground-level moisture traps in this clay soil and corrode fast. We spec sealed or zerk-fitted hinges and set posts deeper than the minimum, because a 20 mph sustained wind against an 18-foot gate puts enormous lateral load on the hinge post.
Double Gate
Double gates are common in Augusta wherever the driveway opening is 16 feet or wider: on ranchettes, at the entrance to a small pasture road, or where a homeowner wants to get a truck and trailer through. Both halves need to meet evenly at the center, which means both posts need to be plumb, level, and set on proper footings. On clay soil that heaves with every freeze-thaw cycle, that’s not a one-time thing. We set the posts with the seasonal movement in mind from the start, and we test the gate’s full swing path before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Augusta
We’re certified to install and service nine major gate brands, and for Augusta’s heavier farm and ranchette gates we lean on Viking and Ghost Controls operators. On residential driveway gates in town, DoorKing and Elite operators are popular choices, and we keep common parts for those units in our service truck so a call to an Augusta address usually doesn’t mean waiting on a parts shipment. Hal’s crew can service LiftMaster, FAAC, BFT, Linear, Mighty Mule, and everything else we hang, and we’re honest with you when a repair makes more sense than a replacement.
Common Gate Installation Problems We See in Augusta Homes
Here’s what we actually run into on Augusta properties, week after week:
- Clay-soil moisture seizing ball-and-socket hinges. On large pipe gates around town’s rural edge, the hinge pin and socket sit an inch from the ground. Butler County clay holds water against that steel. We’ve had to cut hinges off gates that were frozen solid, then weld on new ones. The fix is sealing the hinge assembly and keeping soil and grass from piling up against it.
- Freeze-thaw cycles heaving gate posts. Augusta’s winters cycle the ground through freeze and thaw repeatedly, and heavy clay soil expands and contracts hard. A post set without enough concrete below the frost line moves, and the gate drags or won’t close. We re-plumb the post or pour a new footing, then re-hang the gate. It’s routine work here, but it surprises installers who only know suburban soil in Wichita.
- Undersized operators on wide ranch gates. A residential opener rated for a 10-foot ornamental gate will burn out in months trying to swing a 16-foot steel pipe gate against the prevailing southwest wind. On Augusta acreages, we spec the motor for the gate’s actual weight and wind load, not just the opening width.
- Gates knocked out of alignment by livestock. On ranchettes east and south of town, cattle, horses, and even the family llama lean on gates. A chain latch or a weak post clamp gives out fast. We install heavy post collars, positive stop hardware, and anti-sag kits sized for the abuse those specific animals dish out.
Pricing for Gate Installation in Augusta, KS
Here are the straight numbers for Augusta’s market. A single ornamental driveway gate in town, with a new post and manual latch, typically runs $1,400 to $3,200. A pedestrian gate along a fence line in 67010 runs $500 to $1,200. Heavy steel pipe gates on acreages, especially 16-foot and wider swing gates with a power operator, run $3,200 to $6,800, and that includes re-plumbing the hinge post and pouring proper footings where needed.
What moves the price: the gate’s width and weight, whether we’re repairing or replacing the posts, the operator brand, and whether we need to run power to the gate or go with a solar option. We’ll give you one written price that covers the gate, the posts, the hardware, the operator, and the labor. That price is quoted and agreed to before we start. No surprise line items when the job’s done. Estimates are free, and we offer $40 off any repair over $200, no trip charge inside Butler County, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Augusta
Gatewood Fence & Gate works throughout the Augusta area and the surrounding Butler and Sedgwick County communities, including Andover, El Dorado, Derby, and Wichita. If you’re outside Augusta but within a short drive, call (877) 610-2993 and we’ll tell you when we can be there. The same written pricing and 90-Day Done Right Promise apply everywhere we hang a gate.
Serving Augusta, KS - Our Local Coverage Area
We’re based in the Augusta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Augusta
A single swing gate with one operator generally works well up to about 14 to 16 feet in Augusta, but the wind load from Butler County’s sustained south and southwest winds changes that math. Gates wider than 16 feet usually call for a double gate with two operators, or a slide gate. We’ll calculate the load based on the gate’s exact width, material, and open exposure before recommending a design.
Yes. Many Augusta acreage driveways are hundreds of feet from the nearest power drop, and running conduit that distance can cost more than the gate itself. We install solar-charged operator systems from Viking and Ghost Controls that run on a battery bank and solar panel mounted on the gate post. For heavy pipe gates, we spec the panel and battery capacity around the operator’s duty cycle and the gate’s wind load, not just a generic kit. Call (877) 610-2993 and we’ll tell you what your specific setup needs.
For a 20-foot opening on an Augusta ranchette, a double swing gate with two operators or a single cantilever slide gate are the two designs that hold up here. A single 20-foot swing gate puts enormous torque on one post, especially in the prevailing wind, and it will eventually lean. A double gate splits that load onto two posts. A cantilever slide gate rides on rollers without a ground track, so gravel, grass, and snow don’t interfere. We’ll talk through both options and give you a written price either way.
The structural answer is a deep set post with a proper concrete footing, a heavy post collar, and positive stop hardware that keeps the gate from swinging past its closed position. The behavioral answer is a hot wire or fence offset so animals don’t rub against the gate in the first place. On Augusta ranchettes, we install gates with stock pressure in mind from the start: heavier hinges, through-bolted post mounts, and latch hardware that a 1,200-pound cow can’t pop.
Every automatic gate in the United States, including Augusta, must meet UL 325 entrapment protection standards. That means photo eyes or a reversing edge that stops and reverses the gate when something’s in its path, and it means the operator’s wiring and connections are done to code. On ranch gates, safety photocells matter just as much as on ornamental residential gates, because kids, animals, and equipment are all moving through the same opening. We install and test every safety device before we leave the property. Call (877) 610-2993 for an exact quote, estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Augusta since 2001.