Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Aloha
Gate installation in Aloha, OR runs between $1,400 and $6,800 for most residential jobs, with typical swing gates on 97003 ranch homes landing around $2,200 to $3,500 installed. That covers new posts, concrete, hardware, and the gate itself. We have been doing this work since 2001 and we know exactly what these Washington County yards do to gates over a couple of wet winters. Call Hal Gatewood at (877) 610-2993 and you will talk to a live person who can tell you what your gate actually needs.
Why Gatewood Fence & Gate Is Aloha’s Preferred Gate Installation Company
We are not a franchise. Gatewood Fence & Gate is owned and operated by Hal Gatewood, and his name has been on the shop and every invoice since 2001. When a customer on Kinnaman Road or somewhere off TV Highway calls about a sagging gate, Hal or one of his crew shows up in a truck with the right parts, and the estimate you get before work starts is the price you pay. Every job carries the 90-Day Done Right Promise in writing, so if something is not right after the install, one call brings him back. No runaround, no third-party service line.
Aloha homeowners have a specific problem we understand better than most. This is an unincorporated part of Washington County, not its own city, so gate and fence permits go through the county office in Hillsboro, not a Beaverton city hall. Plenty of residents do not know that until a project stalls at inspection. We know the process, we know what inspectors look for on gate post footings and automatic opener safety compliance, and we handle that paperwork so you do not have to chase it. Response time to Aloha from scheduling is usually next-day for most installs, and emergency repair calls are answered live around the clock.
Our Gate Installation Services in Aloha
Driveway Gate Installation
Driveway gates on Aloha’s 1970s through 1990s ranch homes are usually 10 to 12-foot single swing gates or double gates on wider lots near the Tualatin Hills. We set posts in concrete with proper gravel drainage at the base, because the expansive clay here holds water through the winter and heaves posts that were not set right. A standard steel or cedar driveway gate in the 97003 zip runs $1,800 to $4,200 depending on width and swing or slide configuration.
Pedestrian Gate Installation
Most pedestrian gates in Aloha are 36 to 48 inches wide and hang from the same post as a section of 6-foot dog-ear cedar fence. We match the picket style and rail height to what you have, or we install a new pressure-treated frame with cedar pickets to blend in. Expect $650 to $1,500 for a typical pedestrian gate with new posts and hardware, installed.
Sliding Gate Installation
Sliding gates make sense on Aloha lots with sloped or uneven driveways where a swing gate would drag. The Tualatin Valley’s rolling terrain means some driveways rise eight or ten inches across the gate opening. A cantilever or V-track slide gate starts around $3,200 for a basic steel frame and runs up to $7,500 for heavier ornamental or privacy designs. We handle the track, rollers, motor mount, and safety edges.
Swing Gate Installation
Swing gates are what we install most in Aloha, because they fit the standard ranch layout: a flat driveway apron, two posts, and a simple arc into the yard. But swing gates fail here in specific, predictable ways. The hinge post rots below grade from six months of wet clay contact every year, then the panel sags and the latch stops aligning. When we install a swing gate in Aloha, we treat the post as more important than the panel. A properly set post with drainage stone and concrete below the frost line will not move. Panels can be replaced later; posts should be built once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aloha
We stock parts for the gate openers Aloha already has bolted to its fences, and Hal is certified on nine major gate brands. On this side of the county we work on a lot of Viking, DoorKing, and Ghost Controls units. If you have a 1990s operator with an obsolete control board, Hal will tell you honestly whether it can be retrofitted with modern safety features or whether you are better off replacing the operator while keeping your existing gate. That is the repair-first approach: fix what is fixable, and do not sell you a whole system when a control board and two photocells will do it.
Common Gate Installation Problems We See in Aloha Homes
- Hinge posts rotting at the base. Aloha’s 37 to 40 inches of annual rain soaks into topsoil and sits against untreated or older pressure-treated wood. The post softens right where the gate hangs, then the panel drops and drags on the concrete. Setting a new post with gravel drainage fixes this for decades, not seasons.
- Obsolete operator control boards from the 1980s and 1990s. Many Aloha homes were built when automatic gate openers were becoming standard, and those first-generation boards are no longer made. Worse, they were not designed to meet UL 325 entrapment protection standards. We see these on split-levels off Farmington Road and throughout the older tracts near Cooper Mountain. Some can be retrofitted with safety edges and external photocells; others need replacement.
- Post lean and heave from clay soil movement. Washington County clay expands when wet and shrinks when dry. Posts set directly in that clay with a bag of concrete and no drainage rock will lean within three to five Aloha winters. Swing gates start binding at the latch and the operator motor burns out trying to move a warped arc.
- Gates hung without modern safety sensors. We see gates around Aloha that pre-date mandatory entrapment protection. A closing gate without photocells or contact edges can seriously injure a child or pet. We install tested safety edges and monitored photocells on every automatic gate we touch. No exceptions.
Pricing for Gate Installation in Aloha, OR
Here are honest numbers for the Aloha market. A pedestrian gate with one new post and hardware: $650 to $1,500. A single swing driveway gate, cedar or steel, new posts and concrete: $1,800 to $4,200. A double swing gate for a wide driveway: $3,400 to $6,800. A sliding gate: $3,200 to $7,500. Add a new gate operator with safety photocells: $900 to $2,800 depending on brand and capacity.
What changes the price: gate width, whether the existing post can be reused or is rotted, whether we are running power to the operator location, and whether the ground is sloped enough to require a slide instead of a swing. You get a written estimate before any work starts, and that number does not move at the door. For a free quote in Aloha, call (877) 610-2993.
We Also Serve Cities Near Aloha
Our Gate Installation crew covers Aloha and the surrounding Washington County communities we know well: Rockcreek, Bethany, Cedar Mill, and Oak Hills. All of them share the same clay soil, the same wet winters, and the same aging gate stock from the building boom decades. That means the work we do in your neighborhood is informed by hundreds of jobs just like it.
Serving Aloha, OR - Our Local Coverage Area
We’re based in the Aloha area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Aloha
If you are replacing only the gate panel and hardware on existing posts, no permit is required in Washington County. If you are setting new posts, particularly taller or heavier posts for an automatic gate, the county requires a permit through their Hillsboro office, not a city hall. Aloha is unincorporated, so county code governs. Call (877) 610-2993 and we will tell you whether your specific job needs paperwork before we schedule anything.
Often yes, if the motor and gearbox are still sound. We regularly retrofit older LiftMaster and Viking swing operators in the 97003 zip with monitored photocells and contact edges that meet current UL 325 entrapment requirements. But when the original control board is obsolete, the retrofit math changes. A new Ghost Controls or DoorKing operator with built-in safety logic is usually cheaper than repairing a board that has been out of production for fifteen years. Hal will show you both options with pricing before you commit.
Because your post is sitting in expansive clay that swells when saturated and shrinks in summer. The movement is slow but relentless, and each wet season it gets a little worse. Posts set without gravel drainage or a deep enough concrete collar will heave and tilt. The fix is not straightening the panel; it is pulling the post, drilling a proper footing with drainage stone, and setting it in concrete below the frost line. That is the difference between a repair and a rebuild.
If the hinge post is rotted below grade, the panel has to come off regardless, and the new post must be set properly before the gate can hang straight. You cannot fix the panel and ignore the post; you will be replacing both again in two years. We salvage panels when the pickets and rails are still sound, which happens a lot with older Aloha cedargates that were built heavy. If the panel itself is split or the rails are punky, replacement is cheaper than repeated repair.
Yes. Every automatic gate operator installed or replaced in Aloha must meet UL 325 entrapment protection requirements, which means either a monitored contact edge, monitored photocells, or both depending on the operator type and gate travel. This is a federal safety standard, not a county option, and inspectors check for it. We install and test every sensor before we leave the job. Call (877) 610-2993 for a gate safety check or a written quote.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Serving Aloha and Washington County since 2001.