Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alcoa
Gate installation in Alcoa, TN typically runs $1,800 to $7,500 depending on whether you need a residential driveway gate, a commercial vehicle-rated slide gate along the industrial corridor, or a full security gate system with access control. For homes in the older company-built blocks near the plant, we’re often looking at $1,200 to $2,800 to replace a rusted chain-link or ornamental gate with new post footings and hardware. The short answer: we quote the job before we start, the price doesn’t move once we agree on it, and Hal Gatewood stands behind every install with the 90-Day Done Right Promise in writing. Call (877) 610-2993 and a live person picks up, day or night.
Why Gatewood Fence & Gate Is Alcoa’s Preferred Gate Installation Company
Hal Gatewood has been installing and repairing gates since 2001, and his name goes on every invoice. The shop has a published address and license number anyone can look up. That matters in a town like Alcoa, where people still check who they’re hiring before they let someone onto the property. We’ve worked on gates throughout 37701, from the bungalows near the plant core to the tract homes off Topside Road, and we know what the valley humidity does to steel hardware after twenty or thirty years. When you call, you reach a live person. Not a voicemail, not a dispatch queue three states away. You’ll talk to someone who knows Alcoa and can tell you whether your gate is worth repairing or needs replacing.
And here’s the part that makes us different: we fix what other companies want to replace. If the gate sags, we check the hinge post before we talk about a new panel. If the opener is dead, we test the board before we quote a new motor. Hal welds on site, in your driveway, so the gate stays put instead of getting hauled off for weeks. The 90-Day Done Right Promise isn’t a marketing line. It’s stamped on every job. If something isn’t right, one call brings Hal back. No runaround.
Our Gate Installation Services in Alcoa
Driveway Gate Installation
A driveway gate in Alcoa has to handle morning fog, valley humidity, and the occasional ice event that seizes cheap hardware. We install gates that are sized for the opening, hung level on posts with proper footings, and paired with operators that won’t freeze up in January. Whether you want a simple single swing gate for a bungalow on a narrow lot or a full double gate for the tract homes off Old Knoxville Highway, we quote it honestly before any work starts. Our Gate Installation team handles the fence, the post, the gate, and the operator as one job, not three separate invoices.
Pedestrian Gate Installation
Pedestrian gates around Alcoa’s older homes often get the worst of it. They’re opened a dozen times a day, the bottom rail sits close to damp ground, and the latch takes abuse from kids and delivery drivers. We install powder-coated aluminum pedestrian gates with stainless hardware that holds up in Blount County’s humidity. If you’re replacing a gate next to an existing section of chain-link, we match the fabric and the post size so it looks like it’s always been there.
Sliding Gate Installation
This is the big one for Alcoa. The industrial corridor running from the ALCOA plant through McGhee Tyson Airport is full of vehicle-rated slide gates, and those are nothing like a residential swing gate. A commercial slide gate needs steel V-track or cantilever construction, a heavier operator, and safety photocells wired to the controller. We install sliding gates for industrial tenants, warehouse lots, and secure perimeter entries throughout Alcoa. If you’re running trucks through the gate daily, you need hardware that can take it, and that’s what we spec.
Swing Gate Installation
Swing gates make up most of what we install for residential customers in Alcoa, but the old ones we replace are a reminder of how much hardware has changed. Many 1970s-era ornamental iron gates hang on posts that were never meant to carry an automatic operator. We set new posts with deeper footings, use modern hinges with greasable fittings, and pair the gate with an operator that has entrapment protection built in. In the 37701 zip code, we see a lot of gates that were hung before safety edges were required. A new install means you’re starting from code, not trying to bolt safety features onto a forty-year-old gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alcoa
We’re certified to service nine major gate brands, and the ones we install most often in Alcoa are Linear, Viking, Ghost Controls, and DoorKing. Why those? Linear and Ghost Controls make solid residential swing and slide operators that don’t cost a fortune to maintain. Viking and DoorKing are the workhorses on the commercial side, especially the vehicle-rated slide gates along the industrial corridor. We keep common boards, photo eyes, and limit switches on the truck, so when an Alcoa gate fails on a Tuesday morning, we’re not waiting a week for parts to ship. And we don’t tie you to one brand. We install what fits the gate and the site, not what we happen to have in the truck that day.
Common Gate Installation Problems We See in Alcoa Homes
- Rusted hinge posts on pre-WWII bungalows. The company-built houses near the plant date from the 1920s through 1940s, and many still have their original chain-link gates. The bottom of the hinge post sits in damp Blount County soil, rusts through, and the gate tilts. A panel-only repair fails again within a season because the post is the problem, not the gate.
- Obsolete control boards in legacy operators. Industrial tenants along the ALCOA corridor call us because a 20-year-old operator just stopped responding. Board failure is the most common culprit. Retrofitting a new DoorKing or Elite board often costs a third of a full operator replacement and gets the gate running the same day.
- Ice-seized limit switches and arms. Alcoa sits in the Tennessee River Valley, and when fog rolls in during a cold snap, moisture gets into limit switches and freezes. Gates installed before modern sealed enclosures are the worst offenders. We install operators with heated or sealed resistance features for Alcoa customers who can’t afford a gate that quits in January.
- Gates hung without current safety entrapment protection. Any gate installed before the mid-1990s almost certainly lacks the photocells and edge sensors required today. That’s not just a code issue, it’s a serious injury risk, especially if kids or pets are around. When we install a new gate in Alcoa, safety edges and photocells are standard. No negotiation.
One more Alcoa-specific thing: the split between residential and commercial work here is steeper than almost anywhere else in Blount County. In the city named for an aluminum giant, the older residential blocks are full of cheap galvanized steel that corrodes fast in the valley humidity, while the commercial properties near the plant often spec genuine aluminum or stainless hardware. The same ZIP code demands two entirely different parts inventories and two different skill sets. We carry both.
Pricing for Gate Installation in Alcoa, TN
Here are real numbers for Alcoa’s market, quoted the way Hal quotes them:
- Residential driveway gate (single swing, powder-coated steel): $1,800 - $3,200 installed
- Pedestrian gate with stainless hardware: $900 - $1,800 installed
- Double swing gate for wide driveway: $3,800 - $6,500 installed
- Commercial sliding gate (vehicle-rated, steel V-track): $5,500 - $12,000 depending on width and operator
- Security gate system with keypad or card reader: Add $1,200 - $2,800 for access control wiring and hardware
The price you agree to is the price you pay. Quotes are free, and they’re given before any work starts. If your gate needs a new post footing, we tell you in the quote. If the existing operator can be retrofitted instead of replaced, we tell you that too, even if it means a smaller invoice for us. Seniors and veterans get a permanent 10% discount, and any repair over $200 knocks $40 off. No haggling required. Call (877) 610-2993 and we’ll drive out, look at the gate, and write the number down on paper.
We Also Serve Cities Near Alcoa
Most of our work keeps us in Blount County, but we run jobs into Eagleton Village, Maryville, Farragut, and Knoxville when a homeowner or business needs a gate done right. Alcoa is our home service area for this page, but if you’re ten minutes down the road and your gate is down, we’ll be there. Dispatch and scheduling are coordinated from our Memphis office, and the crews serving Alcoa are local, uniformed, and background-checked.
Serving Alcoa, TN - Our Local Coverage Area
We’re based in the Alcoa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Alcoa
Because the hinge post has usually rotted at the base, and hanging a new panel on a compromised post is wasted money. In the older company-built blocks near the ALCOA plant, we regularly pull original posts from the 1930s and 1940s that are rusted through at ground level. You can’t weld rust, and you can’t shim a post that’s leaning. Replacing the post, setting a new footing, and hanging a properly sized gate is the repair that lasts. In one company-built block, we just did exactly that: a 1940s-era chain-link swing gate with a rotted post got a new footing, a powder-coated steel gate, and a LiftMaster operator with a safety photocell and keypad entry. The original galvanized hardware had seized from valley humidity. The new aluminum hardware will outlast it by decades. Call (877) 610-2993 and we’ll tell you honestly whether the post is worth saving.
Sometimes yes, sometimes no, and the answer depends on the board and the age of the motor. If the control board is obsolete and you’re running an operator from the early 2000s, retrofitting a new DoorKing or Elite board with built-in entrapment protection can save you a couple thousand dollars. If the motor, gearbox, or limit assembly is worn out, a new operator is cheaper in the long run than patching a dead one. Every quote includes the safety upgrade, whether it’s a retrofit or a full replacement. The old gate and operator come with the risk, not a pass. Call (877) 610-2993 for a free assessment and an honest comparison.
A vehicle-rated slide gate with a heavy-duty operator and access control, not a residential swing gate that’ll drag on the ground after a year of truck traffic. The industrial corridor from the ALCOA plant through McGhee Tyson Airport sees semis, delivery vans, and employee vehicles moving through the same entry points all day. Those gates need steel V-track or cantilever construction, an operator rated for continuous duty, and photocells or safety edges wired to the controller. We install sliding gates and security gates for warehouses, contractor yards, and perimeter entries throughout Alcoa. If you’re wondering what the gate needs to actually hold up, Hal will walk the site with you and tell you straight. Call (877) 610-2993.
If the post is solid, the panel can usually be reset. If the post leans, straightening the panel is temporary. In Alcoa’s damp valley climate, the post base is where the trouble starts. A gate sags in the hinge post, not in the middle. We check the post first, every time. If it’s rotted or pulling out of the concrete, we set a new one and hang the gate level. If the post is fine, we adjust the hinges and maybe replace a bent frame member. That’s the honest difference between a repair that lasts and one you’ll be calling about again in six months. Call (877) 610-2993 and Hal will tell you which one you’re looking at.
Yes. For properties on the outskirts of Alcoa or in the quieter stretches of Blount County where running conduit to the gate costs more than the gate itself, we install solar gate openers from Linear and Ghost Controls that are sized for the gate’s weight and duty cycle. Solar is not a fit for every gate, especially heavy commercial slide gates that run constantly. But for a residential swing gate or a light pedestrian gate where the sun hits the panel, it’s a practical fix that avoids trenching. We’ll factor in the valley’s morning fog and winter sun angles before we recommend solar so you don’t end up with a gate that’s dead by 6pm in January. Call (877) 610-2993 for a free site check.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alcoa since 2001.