Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alcoa
Gate repair in Alcoa costs between $145 and $2,800 depending on what failed, with most hinge, latch, and opener repairs running $180 to $450 and full commercial slide gate work reaching higher. The reason the range is wide is simple: Alcoa is not a typical residential gate market. The industrial corridor from the old ALCOA plant through McGhee Tyson Airport means the same ZIP code holds rusted 1940s chain-link swing gates on company-built bungalow streets and vehicle-rated slide gates that keep 18-wheelers moving through warehouse yards.
Hal Gatewood has been fixing gates since 2001, and his crew works in Alcoa every week. Call (877) 610-2993 any time, day or night. A live person answers. Not a voicemail, not a chatbot. The person who shows up will look at the gate, tell you what is actually wrong, and quote a price before any work starts.
Key Takeaways:
- Most residential gate repairs in Alcoa run $180 to $450. Commercial slide gate work starts around $600 and goes up based on the operator and track condition.
- We weld on site. Your gate stays in your driveway. We do not haul it to a shop unless there is no other way to do the job right.
- Every job carries our 90-Day Done Right Promise in writing. If it is not right, one call brings Hal back.
- $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is Alcoa’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, the invoice, and the truck. He has been owner-operated since 2001, and he has never worked for a chain. That matters in Alcoa because the gate work here does not fit a template. A swing gate on a 1920s bungalow near the old plant core needs a different approach than a slide gate on a commercial lot off Alcoa Highway. We fix both.
Our Gate Repair crew carries parts for Linear, Viking, Ghost Controls, and DoorKing operators, plus the steel, hinges, and post hardware to rebuild what rust and time have eaten. We stock what Alcoa actually needs because we work here enough to know the failure patterns. Frozen limit switches in winter. Rotted post footings from valley humidity. Obsolete control boards on 1990s operators that nobody makes parts for anymore. We see those jobs every month.
And we answer the phone. Twenty-four hours a day, seven days a week. A live person picks up when you call (877) 610-2993, even if it is 2 a.m. and the gate will not close before you leave for work. Attempts at online reputation aside, we let the work and the warranty do the talking: 90 days, in writing, on every single job.
Our Gate Repair Services in Alcoa
Electric Gate Repair
Electric gate repair in Alcoa typically costs $225 to $500 when it involves a control board swap, limit switch replacement, or transformer repair. Older residential operators from the post-WWII tract homes around the plant core often have discontinued boards. We retrofit new LiftMaster or FAAC boards rather than chasing obsolete parts that will fail again in a year.
Automatic Gate Repair
Automatic gate repair in Alcoa usually runs $180 to $350 for common operator issues like a gate that stops mid-cycle, reopens on its own, or will not respond to the remote. Moisture trapped in the operator housing causes a lot of what we see here. Fog rolling off the Smoky Mountain foothills keeps components damp, and when an ice event hits, the water inside freezes and seizes limit switches. A gate that drives past its stop point and into a post is a sign the limit switch failed. Do not keep hitting the remote and hoping it sorts itself out.
Hinge & Post Repair
Hinge and post repair in Alcoa costs $220 to $650 depending on whether the post is salvageable or needs a new concrete footer. On a 1940s bungalow street near the old plant core, we replaced a rusted-out hinge post on an original chain-link swing gate. The footing had rotted through from decades of trapped Tennessee River Valley humidity. We poured a new footer, set the post, and rehung the same gate with fresh hardware. That gate closes square and quiet now, and the owner did not have to pay for a new panel he did not need.
Gate Realignment
Gate realignment in Alcoa runs $150 to $300 when the gate is sagging but the hardware is still sound. A gate sags in the hinge post, not in the middle, and that is where we start. If the post is moving in soft ground or the hinge weld has cracked, realigning without fixing the post means you will be calling us again in six months. We will tell you that before we touch anything, not after the invoice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alcoa
We service Linear and Viking operators on residential and light commercial gates across Alcoa, plus Ghost Controls and DoorKing units common on larger driveway and industrial applications. Hal is certified to work on nine major brands, and we keep common control boards, remotes, safety edges, and limit switches on the truck so a single visit usually finishes the job. We do not need to order a part, leave your gate stuck open, and come back two weeks later. If we do not have it on the truck, we tell you that on the phone before we leave the shop.
Common Gate Repair Problems We See in Alcoa Homes
- Rotted post footings on pre-1950 homes. The company-built bungalows near the old plant core sit in soil that holds moisture from the river valley. Original chain-link gates with steel posts set in shallow concrete give way after 40 or 50 years. Fix the panel without the post and you will fix it twice.
- Obsolete control boards from the 1990s. Tract homes built in the 1970s-era infill rings around the plant core still run original automatic gate operators in many cases. Those boards are discontinued. We retrofit modern boards with current safety features instead of hunting down dead-stock parts.
- Worn rack and pinion teeth on commercial slide gates. The constant vibration from truck traffic along the ALCOA corridor chews up drive teeth faster than residential work ever will. A gate that screeches and jerks near McGhee Tyson Airport is usually telling you the rack or pinion is done.
- Corrosion on galvanized steel gates. Alcoa sits in a humid bowl between the river and the foothills. Morning fog lingers, metal stays damp, and cheap galvanized hardware rusts through far faster than it does in higher-elevation parts of Blount County. We replace hinges with stainless or heavy-gauge galvanized parts that last.
Pricing for Gate Repair in Alcoa, TN
Here is what Alcoa homeowners and property managers can expect to pay for common repairs, quoted before any work starts:
- Hinge replacement and realignment: $180 to $350
- Hinge post replacement with new concrete footer: $400 to $650
- Control board retrofit (LiftMaster, FAAC): $350 to $600 including labor
- Limit switch replacement on an automatic operator: $180 to $300
- Commercial slide gate rack and pinion repair: $600 to $1,500 depending on gate length and weight
- Full residential gate replacement (materials and labor): $1,200 to $2,800
Every estimate is free and put in writing. The price we quote is the price you pay, and you approve it before we start turning wrenches. No trip charge inside the county. And remember the standing offers: $40 off any repair over $200, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 to schedule a time to have it looked at.
We Also Serve Cities Near Alcoa
We work throughout Gate Repair in Alcoa and the surrounding county every week. If you live in Eagleton Village, Maryville, Farragut, or Knoxville, the same crew, warranty, and pricing apply. Same phone number, same 24-7 live answer: (877) 610-2993.
Serving Alcoa, TN - Our Local Coverage Area
We’re based in the Alcoa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Alcoa
Because the houses near the old plant core were built in the 1920s through 1940s, and the original gate posts were set shallow in soil that never fully dries out. The post footing rots or shifts, the gate sags, and the hinges pull. Replacing a panel without addressing the post is throwing money away. In most cases we cut out the old post, pour a proper footer, and rehang the same gate for $400 to $650. Call (877) 610-2993 and we will assess the post before you spend anything on a panel.
Yes, in most cases we can. Older operators that predate current UL 325 safety requirements often lack photo eyes, safety edges, or proper entrapment protection. We retrofit those systems without replacing the entire operator. A retrofit with new safety edges and photo eyes runs $300 to $600 depending on the operator. We will not leave a gate running without the safety gear it should have had in the first place.
Yes, noticeably. Alcoa sits in the Tennessee River Valley where humidity and morning fog from the Smoky Mountain foothills keep metal damp even during dry stretches. Galvanized steel hardware rusts faster here than it does just 20 minutes up the hill. We replace failed hinges and latches with stainless or heavy-gauge galvanized components so you are not redoing the same repair in five years.
It is usually the rack and pinion, not the motor. Constant truck traffic creates vibration that wears the drive teeth unevenly, and the noise is the teeth clattering as they slip. If the gate is jerking, the pinion is likely skipping on a worn section of rack. We inspect the full length of the rack, replace the worn section, and adjust the operator. That work runs $600 to $1,500 depending on the gate. We can be there today if you need a commercial gate open and secure.
It is an odd local quirk. Alcoa was built as the company town for the Aluminum Company of America, so the residential blocks near the plant are full of budget galvanized steel gates from the 1940s that corrode badly in the valley humidity. Meanwhile, the commercial properties along the plant corridor often spec genuine aluminum or stainless hardware because the industrial tenants know what holds up. The same ZIP code demands two different parts inventories and two different skill sets. We carry both.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alcoa and the surrounding communities. Hal has been fixing gates since 2001, and his name is on the shop.