Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Acworth
A new driveway or pedestrian gate in Acworth, GA typically runs $2,800 to $7,500 installed, depending on whether it’s ornamental iron, aluminum, or a sliding design with automation. Most installations take one to three days, and our crew can usually be at your property within a few days of the quote. Hal Gatewood has been putting gates in Acworth driveways since 2001, and the number to call is (877) 610-2993. We answer the phone with a live person, not a machine.
Why Gatewood Fence & Gate Is the Name Acworth Homeowners Call
Acworth is not a big anonymous market. When a swing gate in Bentwater or Centennial Commons starts binding, the homeowner asks a neighbor who fixed theirs. We built our name in Acworth the slow way: showing up in the window we promised, finishing the job, and handing over a written 90-Day Done Right Promise on every invoice. We are not a franchise and we’re not passing through. The shop is locally owned and owner-operated, and if you want to drive to the shop and look Hal in the eye before you sign anything, the address is published and the door is open.
Our Acworth customers come to us for one thing more than any other: they inherited a builder-grade gate operator that never worked well from day one. A lot of these gates were put in during the late-90s and 2000s HOA boom. The hinges were undersized. The operator was never meant to swing a gate that heavy. And the post footing was poured on the cheap. We fix all three. That is why Acworth homeowners keep our number saved.
Every job is background-checked, uniformed, and backed by the same owner who answers the phone. We are certified on nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a gate motor quits in 30102, we almost always have the part in the truck or at the shop the same day.
Our Gate Installation Services in Acworth
We do not sell one-size-fits-all gates. What goes on a half-acre lot off Highway 92 is not what goes at the entrance of a 400-home subdivision off Bells Ferry Road. We walk the property, look at the soil, look at the slope, and then tell you what will actually hold up.
Driveway Gate Installation
Most Acworth driveway gates go on lots with some slope to them, and that slope matters more than people think. A gate that has to fight grade on a swing arc needs a bigger operator than the same gate on flat ground. We size operators for how much gate is actually there, not how much the box says. A standard ornamental iron driveway gate in Acworth with a pedestal-mounted opener runs $3,200 to $6,800. A heavier custom double driveway gate runs $5,500 to $9,500, including the poured post footings.
Pedestrian Gate Installation
Pedestrian gates in Acworth neighborhoods like Cameron Creek and Baker Heights tend to wear out faster than driveway gates because they get cycled ten times a day. We install steel-frame pedestrian gates with mag locks or keypads, and we set the post in concrete below the frost line so the red clay does not shove it around later. Expect $1,200 to $2,400 for a solid steel pedestrian gate with a keypad lock.
Sliding Gate Installation
Sliding gates are the right call when the driveway runs perpendicular to the street or when there is no room for a swing arc. In Acworth’s HOA subdivisions, we see a lot of sliding gates at community entrances that are now 20 years old and need full reinstallation, not just a new board. A new residential sliding gate with a chain-drive or rack-drive opener runs $4,500 to $8,000. We also fix the track, which is where Acworth’s humidity and occasional ice storms do their worst damage.
Swing Gate Installation
This is the gate we install most in Acworth. Swing gates dominate the planned neighborhoods around Lake Allatoona, from Hickory Grove to the entrance monuments all along Main Street. The failure mode we see over and over is not the motor. It is the post. Acworth’s red clay expands when it is wet and shrinks when it is dry, and over a decade it walks a post a full inch out of plumb. A swing gate installed straight binds, grinds, and trips the photocell. We pour footings at a depth the manufacturer actually calls for, which a lot of the original HOA builders did not. Swing gate installation with a new operator runs $2,800 to $7,500 in Acworth.
Trusted Brands We Service and Install in Acworth
We install and service Linear, Viking, Ghost Controls, and DoorKing operators, among others. The right brand for an Acworth gate depends on the gate weight, how often it cycles, and whether it is exposed to full south sun and lake humidity. A solar Ghost Controls opener works well on a single driveway swing gate where you don’t want to trench power. A Linear or Viking operator is what we usually recommend for heavier community entrance gates. We keep common boards, remotes, and safety edges for these brands in local inventory, so we’re not waiting a week on a shipping truck when your gate won’t close.
Common Gate Installation Problems We See in Acworth Homes
- Builder-grade operators failing in waves. The HOA subdivisions built in Acworth between 1995 and 2010 went in fast, and the gate operators went in cheap. We get calls weekly from Bentwater, Grove Park, and similar neighborhoods where a gate that never opened smoothly is now stuck mid-cycle. Replacing just the motor without looking at the post lean is the mistake we see most.
- Post lean from expansive red clay. Acworth sits on some of the most reactive clay in the metro area. Post footings poured shallow, or without enough rebar, tilt over time. The gate starts dragging on the latch side. Homeowners call thinking the opener is failing. It is not. The post moved.
- Humidity-driven corrosion in wiring and hinges. Acworth is close enough to Lake Allatoona that we get lake air plus Georgia humidity. Wiring harnesses on gate operators corrode faster here than in drier parts of the county. We use sealed connectors and weatherproof junction boxes on every Acworth install.
- Ice storm damage to tracks and arms. Acworth does not get ice often, but when it does, the ice is serious. Snake-arm operators and sliding gate tracks get bent when ice loads them up. We see a sharp spike in calls after every freeze event, and we keep replacement arms and track sections ready in the winter months.
Pricing for Gate Installation in Acworth, GA
Here is what Acworth homeowners can expect, written plainly. A single ornamental iron swing gate with a basic swing opener: $2,800 to $4,200. A double swing driveway gate with an operator rated for the weight: $5,500 to $7,500. A sliding gate with track, post, and rack-drive opener: $4,500 to $8,000. A pedestrian gate with keypad and mag lock: $1,200 to $2,400. Adding automation to an existing manual gate, including the operator, arms, safety photocells, and the power run: $1,800 to $3,500. The price you are quoted is the price you pay, agreed before any work starts. We do not show up and pad the invoice.
You also get the standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free written estimate.
We Also Serve Cities Near Acworth
Our crews work locally across Cherokee and Cobb counties. In addition to Acworth, we install and service gates in Kennesaw, Woodstock, Holly Springs, and Marietta on a regular basis. If you are a few miles outside Acworth proper, call anyway. We’ll tell you straight whether we can get to you this week.
Serving Acworth, GA - Our Local Coverage Area
We’re based in the Acworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Acworth
The operator is rarely the culprit. Acworth’s red clay expands when saturated, which pushes gate posts out of plumb. When the post tilts even an inch, the hinge and latch geometry changes and the gate binds against the latch post. We see this all over 30101 and 30102. The fix is not another motor. It is a proper post footing below the frost line, rebar, and sometimes a new post entirely. Call (877) 610-2993 and we’ll put a level on it before we touch the operator.
Yes, and we do this often. Many Acworth homes from the 1990s and 2000s boom had manual ornamental gates added later, often on sloped lots. The gate itself is usually fine. What matters is whether the hinge post is solid enough to take an opener and whether we can run conduit for power and a safety photocell. We run new conduit, cut the arms to fit the gate, and wire in the safety edge so the gate is code compliant. That job runs $1,800 to $3,500 depending on the gate and the power run distance. Call (877) 610-2993 for a free estimate.
We recommend an arm-style or underground swing operator with sealed connectors and a weatherproof control box for Acworth’s climate. Humidity from Lake Allatoona and the surrounding creeks corrodes exposed wiring and control boards faster than in drier areas. For ice, the main thing is sizing the operator correctly so it is not already maxed out before ice adds weight. We favor Viking and Linear for heavier swing gates exposed to open weather, and Ghost Controls for lighter solar applications. Call (877) 610-2993 if you want a straight answer for your specific gate.
Yes, and most Acworth HOAs now require them. A loop detector senses a car sitting in the gate’s path and keeps the gate from closing on it. Without one, a sliding gate will close on a car or a person eventually. Acworth’s HOA subdivision entrances see constant traffic, so we install loop detectors on every sliding gate we put in at community entrances. Residential driveway sliders should have them too, especially if kids or visitors are parking in the gate path. Call (877) 610-2993 and we’ll explain what your HOA needs.
Because federal safety standards and local code require them, and because a 400-pound gate will crush a child without them. Photo-eyes and edge sensors prevent the gate from closing on a person, car, or bike. Acworth has a lot of young families in the 1995-2010 subdivisions, and those are exactly the neighborhoods where a gate without safety edges is a tragedy waiting to happen. We install photocells and reverse loops on every automated gate we touch. Call (877) 610-2993 if your current gate does not have them.
Call Acworth’s Gate Installation Team That Actually Lives Here
If your gate is 20 years old and the post is leaning, or if the builder-grade operator gave up, do not pay for another motor bolted to a bad post. We will put a level on the hinge post, price the real fix, and put the number in writing before we start. That is the job. Call (877) 610-2993 and talk to a live person, day or night. The name is on the shop, and the shop is not far from Acworth.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Acworth since 2001.