Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across White House
Gate access control keeps your driveway gate moving when you want it to move and locked when you don’t. In White House, TN, that usually means a keypad or phone entry system tied to an opener that’s been doing its job since the neighborhood was built. Gatewood Fence & Gate has been fixing those systems since 2001, with a live person answering every call. If your gate won’t respond to the remote or the keypad lights up but the motor doesn’t move, call (877) 610-2993 and Hal Gatewood’s name is on the shop that will show up.
We work across ZIP 37188, from the HOA subdivisions near US-31W to the older acreage parcels on the rural fringe. The difference matters here more than most places, because the access control problems in a 2008-built subdivision off Hester Drive look nothing like the problems on a five-acre property off Bethel Road. We know both.
Key Takeaways
- Phones are answered by a live person around the clock, and same-day service is normal for dead keypads and openers.
- We service nine major brands including LiftMaster, Ghost Controls, Linear, and Viking.
- Every job carries the 90-Day Done Right Promise in writing.
- Free second opinion on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is White House’s Preferred Gate Access Control Company
Hal Gatewood has been running this shop since 2001, and the same accountability that worked then works now: his name is on the door and his address is published where anyone can find it. When something goes wrong in White House, the person who shows up is not a subcontractor from another county. We coordinate scheduling from our Memphis office, but the crews serving White House work these streets regularly. You’ll see the same faces at the hardware store.
We have earned a strong local reputation in White House by doing the thing most gate companies won’t do: fixing the gate that’s already there. A national outfit will tell you to replace the whole opener when a control board dies. We stock retrofit boards for the mid-2000s LiftMaster and Ghost Controls units that builders installed in White House subdivisions by the hundreds. That’s why we can often repair in one visit what another company quoted as a full replacement.
Response time to White House is usually same-day for access control failures. If your gate won’t open and your car is stuck in the driveway, we treat that as an emergency. Call (877) 610-2993 and a person picks up. Not a voicemail tree.
Our Gate Access Control Services in White House
Access control means the parts of the system that decide who gets in: the keypad on the post, the remote in your car, the phone entry box at the curb, the card reader on the pedestal. In White House, the failure patterns are predictable enough that we can usually tell you what’s wrong from a short phone conversation. Here’s how each piece typically works in this area.
Keypad Entry
A keypad on a White House gate post takes weather beating year-round. Summer humidity seeps into the housing, winter ice contracts every seal, and the internal ribbon cables on mid-2000s units crack. We replace weather-sealed keypads that survive Highland Rim winters correctly. A typical keypad replacement or retrofit in White House runs $180-$340, depending on whether we can reuse the existing wiring or need to run a new low-voltage feed through conduit.

Remote Control
When a homeowner tells us their remote stopped working, the problem is rarely the remote itself. On White House subdivision gates, the receiver card on the opener is the usual failure point, especially on builder-spec LiftMaster and Ghost Controls units from 2005 to 2012. Reprogramming a receiver or replacing a failed one runs $140-$260. If your whole neighborhood seems to have dead remotes around the same time, it’s usually the same control board batch failing, not a coincidence.

Phone Entry
Phone entry systems route calls from the gate to your cell phone or landline so you can open the gate remotely. In White House, rural fringe properties off Bethel Road and New Hall Road often add these to farm gates that predate the neighborhood subdivisions. A basic phone entry retrofit with relay and power supply runs $450-$800. Cellular-based units run higher because they don’t rely on a landline, though rental homes and properties with poor cell coverage at the gate post need a hardwired alternative.

Card Reader
Card readers appear more often at the private road and community entrance gates in White House HOA subdivisions than at single-family driveways. They often fail by corrosion at the card slot or in the wiring connection at the pedestal base. We service card reader cabinets that have been untouched for a decade and can often repair rather than replace. A card reader swap runs $250-$500, and we program the existing cards rather than making you reissue everyone’s credentials.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White House
Most White House gates run one of four brands: LiftMaster, Ghost Controls, Linear, or Viking. We are certified to service all of them, plus FAAC, BFT, DoorKing, Elite, and Mighty Mule. That matters in White House specifically because so many subdivisions have the same builder-spec opener installed across entire streets. When we know a neighborhood was built with a particular era of Ghost Controls board, we stock the retrofit component before anyone calls. It saves a second trip and it saves you money. If you’re not sure what you have, describe the keypad and opener housing on the phone and we’ll usually identify it.
Common Gate Access Control Problems We See in White House Homes
- Dead control boards on mid-2000s builder-spec openers. The original LiftMaster and Ghost Controls units installed during the 2000s-2010s building boom in White House are now hitting the age where capacitors and relays fail. On some streets, we’ve repaired four or five identical failures in a single season.
- Heaved hinge posts from freeze-thaw cycles. Robertson and Sumner counties sit on the Highland Rim and get more frequent winter ice than Nashville proper. The heavy clay soil absorbs water, freezes, expands, and pushes gate posts out of plumb. When the post moves, the opener’s limit settings go wrong and the keypad stops syncing.
- Safety sensor faults on older rural gates. Farm gates on the outskirts of ZIP 37188 were often hung on pipe posts decades ago, before UL 325 required safety photocells and edge sensors. Adding modern access control to those gates means the safety system has to come up to code first. We will not wire a card reader onto a gate that can’t sense a child in the path.
- Keypad wiring crushed or corroded at the post base. Underground conduit in White House subdivisions often travels under landscaping and irrigation lines. Corrosion at the splice point inside the post is the most common point of failure for keypad and phone entry systems.
Why So Many White House Gates Fail Around the Same Time
White House is one of the fastest-growing bedroom communities along the I-65/US-31W corridor north of Nashville. A large share of the housing stock is HOA subdivisions platted during the 2000s and 2010s building boom, with brick-front homes on modest lots and ornamental aluminum driveway gates installed by the original builder. Those gates are now 10 to 15 years old, and that’s the window when openers, hinges, and post anchors typically fail together. When one house on a street has a dead control board, odds are good the same board was installed in every house on that street. The next few years will see a wave of these identical failures across White House, and we’re already stocking the retrofit parts to stay ahead of it.
At the same time, the rural edges of White House still hold older acreage parcels with agricultural-style swing gates hung on pipe or wood corner posts. Those gates were never intended for modern access control. The rails are heavy, the hinges are worn, and the posts have shifted over decades of wet winters. Adding a phone entry system to a gate like that without fixing the post and hinge first is a waste of money. We fix the gate, then add the access control. Different market, same service area, and we carry parts for both.
In a subdivision off US-31W in White House, we repaired a mid-2000s ornamental aluminum swing gate where the original LiftMaster operator had a dead control board and the hinge post had heaved out of plumb from freeze-thaw cycles. We replaced the obsolete board with a compatible retrofit and installed a new post footing before re-hanging the gate and verifying the safety photocell under UL 325, so the whole street of similar builder-spec gates now has a local fix pattern.
Retrofit or Replace? What We Tell White House Homeowners Honestly
Some companies will quote you a new opener the moment an old one stops responding. We won’t. If the control board on a mid-2000s LiftMaster or Ghost Controls unit is dead, a retrofit board can bring it back for a fraction of the replacement cost. If the gear train or motor is worn out, replacement is the smarter long-term answer. The honest calculus is this: if the opener is less than 15 years old and the post and hinges are solid, retrofit. If the gate itself is sagging and the post has heaved, fix the structural problem first, then decide on the access control. We lay all of this out before any work starts, with the price agreed in writing.
Pricing for Gate Access Control in White House, TN
Here are real numbers for what we see in White House. A keypad replacement or retrofit runs $180-$340. Remote control troubleshooting and receiver replacement runs $140-$260. A phone entry retrofit starts around $450 and can reach $800 for cellular units. A card reader swap runs $250-$500. A full access control package, including keypad, phone entry, and safety sensor verification, typically runs $900-$1,600 on a standard White House subdivision driveway gate. Rural farm gate retrofits cost more because the structural work comes first. Every price is quoted and agreed before any work starts. You will never see a higher number at the door than the one we discussed on the phone. Call (877) 610-2993 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near White House
Our crews cover White House and the surrounding communities along the I-65 corridor. If you’re in Greenbrier, Millersville, Goodlettsville, or Hendersonville, we handle gate access control there too. The same live-answer phone, the same 90-Day Done Right Promise, and the same repair-first approach. Learn more about our full Gate Access Control services, or see how we serve White House and the rest of the 37188 area.
Serving White House, TN - Our Local Coverage Area
We’re based in the White House area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in White House
Because the builders installed the same gate opener and control board in every home on the street, and those units from the mid-2000s to early 2010s are now reaching end-of-life together. We see clusters of identical LiftMaster and Ghost Controls board failures in single seasons across White House neighborhoods. If your gate died the same week as your neighbor’s, it’s not bad luck. Call (877) 610-2993 and we’ll identify the era of your unit from the phone description.
Yes, but the structural work comes first. Older farm gates on the rural fringe of ZIP 37188 are typically hung on pipe or wood posts that have shifted over decades, and many lack the safety photocells and edge sensors required under UL 325. We bring the gate up to code, then add keypad, phone entry, or card reader access. Skipping the structural repair means the new access control will fail when the gate sags. Free second opinions are always available on any written estimate.
It’s almost always a hinge or post problem, not an access control problem. White House’s heavy clay soil and frequent winter ice events cause freeze-thaw cycles that heave gate posts out of plumb. When the post moves, the opener’s limit settings go wrong and the keypad stops working reliably. The fix is in the post and hinge, not the control board. We fix both on the same visit.
Yes. UL 325, the federal safety standard for automated gates, requires photocell or edge sensors to detect obstructions, and that applies to every automatic gate in White House. We verify every safety sensor on every job and document it. A gate that can’t sense a child in the path should not be moving.
In most cases, yes. Video intercom mounts to the existing gate post and integrates with the current keypad and opener. HOA architectural standards usually allow it as long as the hardware is powder-coated to match the gate. We install video intercom systems that work with your phone so you can see who’s at the gate before opening it. Call (877) 610-2993 for an exact quote, and the estimate is free.
Call Gatewood Fence & Gate for Gate Access Control in White House
If your gate won’t open, your keypad is dead, or you’re tired of the remote working only when it wants to, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and the name on the shop is the name on the invoice. We answer live around the clock, quote every job before work starts, and back it all with the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. That’s the oldest accountability there is: the name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White House since 2001.





Before
After
Before
After
Before
After