Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pasadena, CA
Gate repair in Pasadena typically runs $180 to $950 depending on whether we’re fixing a sagging hinge post on a 1920s Craftsman, replacing a stripped gear in an opener, or welding a cracked ornamental iron panel back together. The housing stock here skews older than any neighboring city, and the Santa Ana winds funneling out of the San Gabriel passes hit Pasadena harder than Arcadia or Alhambra just a few miles south. That combination means the work here is rarely a simple part swap. Call us at (877) 610-2993 and a live person will tell you honestly what your gate needs and what it’ll cost before any work starts.
Why Pasadena Homes Are Different
Pasadena sits directly at the mountain front where the San Gabriel passes empty into the valley. When a Santa Ana wind event fires up, the gusts here are stronger and drier than what the flatland towns to the south feel, and those winds are the single biggest cause of gate post shear, hinge tear-out, and actuator arm breakage we see in this city. A gate that survived twenty years on the west side can fail in one afternoon when a 70-mph gust catches it.
Then there’s the sun. Pasadena doesn’t get the marine layer that buffers coastal Los Angeles, so UV exposure is relentless. Powder coat on ornamental iron fails faster here, paint chalks and cracks, and bare metal starts oxidizing within a few years. We routinely weld in new sections where rust has eaten through bottom rails on gates that would still look decent in Santa Monica.
The housing stock compounds it. Most homes in 91103 through 91106 were built before 1940, and many still carry their original post-and-strap hinge systems on wood or ornamental iron gates. In the Bungalow Heaven Landmark District and the Arroyo Seco corridor estates of 91105, matching period ironwork isn’t optional, it’s the job.
Gate Repair in Pasadena
Gate repair in Pasadena means working on gates that are older than the homeowners, often original to Craftsman and Spanish Colonial homes built before World War II. The most common call we get is a gate that’s started dragging across the driveway, which almost always traces back to a hinge post that has shifted or rotted at the base. We fix the post, true the gate, and weld on site so the panel doesn’t leave your property. For a deeper look at how we approach this work, see our Gate Repair page.
Hinge & Post Repair
Once a gate starts dragging, the hinge post has usually shifted or rotted at the base, especially with the older post-and-strap systems on pre-1940 homes in Pasadena. Fix the panel without the post and you’ll fix it twice. Typical hinge and post repair in Pasadena runs $180 to $520, quoted before we touch anything.
Electric Gate Repair
When an electric gate stops responding in Pasadena, the failure is usually one of five things: the operator board, a limit switch, the safety loop, the photo eye, or a power feed that has corroded after years of valley heat. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we’re not stuck ordering from a warehouse while your gate sits open. Electric gate repair in Pasadena commonly runs $240 to $680.
Gate Realignment
A gate that won’t latch, binds against the walkway, or scrapes the driveway has a geometry problem, and geometry doesn’t fix itself. In Pasadena, with the soil movement we see in neighborhoods like Bungalow Heaven and the hill-country lots above Orange Grove Avenue, realignment is often the difference between a gate that lasts twenty years and one that sags again in nine months. Realignment in Pasadena runs $150 to $350.
How fast can you get to my Pasadena home?
Most non-emergency gate repairs in Pasadena are scheduled within one to two business days. Emergencies where the gate is stuck open or won’t secure get priority same-day attention whenever possible. Call (877) 610-2993 and a live person will give you a real arrival window.
Can you do emergency gate repair in Pasadena?
Yes. If your gate won’t close and your property is unsecured, call us any hour. A live person answers 24/7. We prioritize security failures over scheduled work and will tell you when to expect someone on site. Call (877) 610-2993.
Gate Installation in Pasadena
A new driveway gate or pedestrian gate in Pasadena typically costs between $2,800 and $9,500 for a standard single swing gate, and $5,500 to $18,000 for a double driveway gate with automation. The range depends on ironwork, wood species, and whether the existing posts can be reused. Most installations take one to two days once materials arrive, with on-site welding and full operator setup included. Our Gate Installation page covers the full process.
Driveway Gate Installation
A driveway gate on a Pasadena property has to handle two things: steep grades on hillside lots and wind that funnels hard out of the San Gabriel passes. We set posts in concrete at the proper depth for your soil, not a generic depth, and weld heavy-duty hinges that won’t shear when a Santa Ana wind slams the gate shut. A typical single driveway gate in Pasadena runs $2,800 to $6,500 installed, including the operator if you want automation.
Pedestrian Gate Installation
Front pedestrian gates in Pasadena are more visible than in most cities. In Bungalow Heaven or the streets around Madison Heights, a gate is part of the home’s curb appeal, not just a security feature. We match wood gates to existing tongue-and-groove detailing and match iron gates to the period scrollwork already on the property. A pedestrian gate installation in Pasadena usually costs $900 to $2,800 depending on material and custom work.
Sliding Gate Installation
Hillside driveways with limited set-back space often need a sliding gate, not a swing gate. Sliding gates ride on a track across the driveway opening, which works well on the steep lots in 91105 and 91106 where a swing gate would arc into the street. A sliding gate installation in Pasadena typically runs $4,500 to $11,000, including track, motor, and safety edges.
Does a new gate in Pasadena need a permit or design review?
Sometimes it does. If your gate is visible from the public right-of-way and you’re in a designated historic district like Bungalow Heaven, Pasadena’s Historic Preservation staff may require a Certificate of Appropriateness before work is finalized. A gate more than six feet tall also triggers a building permit in most residential zones. We flag these requirements before we start.
How fast can you install a gate in Pasadena?
Most standard gate installations in Pasadena are completed one to two weeks after you approve the written estimate. Custom wood or ornamental iron gates add two to four weeks from deposit to installation day. We keep common iron panel styles and standard operators in local stock, which cuts the wait on many orders. Call (877) 610-2993 with your gate size.
Gate Motor & Opener in Pasadena
Gate motor and opener work in Pasadena has a particular character. The houses are older, the driveways are tighter, and the Santa Ana winds hit harder here than a few miles south. A gate opener that fails on an Arroyo Seco hillside estate at 6 a.m. doesn’t just mean parking on the street. It means a 90-year-old wrought-iron gate that now has to be muscled open by hand. See our Gate Motor & Opener page for the full scope of what we service.
Motor Repair
Most dead gate motors in Pasadena aren’t actually dead. They’re full of oxidized contacts, stripped gears, or a capacitor that gave out after one too many Santa Ana wind cycles. We open the housing, test the board, and fix what’s broken instead of selling you a new operator because it’s easier for us. A straightforward motor repair in Pasadena typically runs $180 to $340, including the service call and most common parts.
Slide Motor
Slide gates show up on Pasadena’s tighter lots, especially shared driveways off Lake Avenue and narrow side yards in 91104. Wind gusts funneling out of the San Gabriel passes hammer these gates, and a slide motor with a worn rack or bent guide roller will jump the track right after a big wind event. Full slide motor replacement in Pasadena runs $800 to $1,600, and we quote that number before any work starts.
Battery Backup
Pasadena’s wind events knock out power on hillside streets in 91105 with some regularity. A battery backup on your gate opener means you’re not stranded when a transformer blows on a windy night. We install and wire battery backup units for existing swing and slide operators, test them under load, and show you exactly how long they’ll run without line power. Battery backup installation runs $350 to $800 on top of the operator.
Do I need a permit to replace my gate opener in Bungalow Heaven?
If the gate itself is being replaced or its appearance changes, and it’s visible from the public right-of-way in the Bungalow Heaven Landmark District, you likely need a Certificate of Appropriateness from Pasadena’s Historic Preservation staff. Motor-only repairs that don’t alter the gate’s appearance usually don’t trigger review. We’ll tell you which category your job falls into before we start.
Can you rebuild my 1990s Viking operator on an Arroyo Seco estate?
We rebuild Viking operators whenever the gearbox and board are worth saving, which is often. Capacitors, limit switches, and gear grease are the usual culprits. If the board itself is fried and no drop-in replacement exists, we’ll quote a modern operator that fits the existing gate and mounting plate, and you’ll see that number in writing before we order anything. Call (877) 610-2993 for a free estimate.
Gate Access Control in Pasadena
A gate access control system in Pasadena typically costs $850 to $2,400 installed, depending on whether you need a keypad, phone entry, or video intercom retrofitted to an existing gate. Most Pasadena homes we work on need a system that handles the sun, the Santa Ana winds, and a gate that was probably built before the internet. Our Gate Access Control page lays out the options in detail.
Keypad Entry
Keypad entry is the most common system we install on Pasadena gates, and the inland UV here is brutal on plastic housings. We install keypads with die-cast or powder-coated housings that survive the summer heat on Orange Grove Boulevard and the winter chill in the foothills. A new keypad in Pasadena typically runs $350 to $800 installed.
Phone Entry
Phone entry systems let a visitor buzz your gate and reach your cell phone, even if you’re not home. This is a smart option for homeowners in the hillside areas of 91105 who want to screen deliveries or contractors without walking down a long driveway. In Pasadena, a phone entry system typically costs $900 to $1,800 installed, including hardware, the cellular or landline module, and setup.
Video Intercom and Smart Access
More Pasadena homeowners are asking for video intercom and smart access systems. You see who’s at the gate from your phone, and you can open it from anywhere. A video intercom in Pasadena runs $1,500 to $3,000 installed, depending on camera quality and whether you want cloud recording. Smart access that combines a keypad, a phone app, and a camera is the most requested upgrade for homeowners in 91103 and 91105.
What does a full gate access control installation in Pasadena include?
A full installation includes the keypad, card reader, phone entry, or video intercom unit, the wiring and power connection, programming, and testing. We also check the gate itself, the hinges, and the operator to confirm the system will hold up under Pasadena’s wind and heat. The price is quoted before work starts and includes everything, not just the hardware.
What warranty do I get on gate access control work in Pasadena?
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, you call, and we make it right. That applies to every installation, repair, and retrofit we do in Pasadena. No fine print, no hedging. Just a person who stands behind the work. Call (877) 610-2993.
Gate Parts & Welding in Pasadena
Gate parts and welding in Pasadena usually cost between $180 and $1,400 depending on whether we’re replacing a hinge or building a custom iron panel, and most jobs are finished in a single visit. It’s not glamorous work, but it’s the difference between a gate that opens quietly for another decade and one that drags across the driveway every morning. We weld on site in your driveway, and the panel never leaves your property. See our Gate Parts & Welding page for more.
Hinge Replacement
Hinge replacement in Pasadena typically runs $180 to $420 per gate, depending on the weight of the panel and whether we’re matching period hardware. On pre-1940 Craftsman homes in 91103 and 91104, the original post-and-strap hinges are often wrought iron with a specific curve that a modern off-the-shelf hinge simply won’t match. We weld replacements on site and replicate the old scroll work so the gate looks right against a 1920s porch.
Post Replacement
A steel gate post in Pasadena usually costs $350 to $900 to replace, with the price driven by whether we’re digging out an old concrete footer or welding a new post onto an existing base plate. The Santa Ana winds that rip down the San Gabriel passes are brutal on posts that were never set deep enough. We routinely find posts in 91105 hillside properties where the footer stops two feet short of where it should be.
Custom Welding
Custom welding jobs in Pasadena range from $300 for a small scroll repair to $1,500 or more for a full ornamental iron panel built to match a 1920s original. The city’s density of pre-1930s architecture means we get called for things that never come up in Arcadia or Alhambra, like replicating a missing section of Spanish Colonial ironwork or fabricating a side gate to match a Bungalow Heaven entry. We match dimensions, scroll patterns, and the slight imperfections of period forge work.
Can you do emergency gate welding in Pasadena after hours?
A live person answers the phone 24 hours a day, 7 days a week, so you can always reach us. For true emergencies, like a gate that’s stuck open and leaving a driveway exposed, we’ll get someone out as fast as the schedule allows. The after-hours call is the same number: (877) 610-2993.
Is gate repair more expensive in Pasadena than in nearby cities?
Our pricing is the same across Pasadena, South Pasadena, San Marino, Altadena, and East Pasadena. What changes the final number isn’t your ZIP code, it’s the size of the gate, the depth of the failed post, and whether we’re matching period hardware from the 1920s. A written quote is free, and the price is set before work begins.
Brands We Service in Pasadena
We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. DoorKing and Elite units show up constantly on 1990s hillside estate gates in Pasadena, and we keep common boards and limit switches for those in local stock. That means most repairs happen the same visit instead of waiting on a warehouse. See our brands page for the full list.
Pricing for Gate Repair in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Hinge & post repair | $180-$520 |
| Gate realignment | $150-$350 |
| Electric gate repair (board, limit switch, photo eye) | $240-$680 |
| Automatic gate repair (actuator arm, operator service) | $260-$950 |
| Weld & rust repair (on-site) | $200-$600 |
| Lock repair / replacement | $120-$300 |
| Hinge replacement | $180-$420 per gate |
| Post replacement | $350-$900 |
| Rail repair | $220-$580 |
| Custom welding and scroll work | $300-$1,500+ |
| Gate roller replacement (sliding gates) | $150-$400 |
What pushes the price up in Pasadena is usually the weight of an older gate, the depth of a failed post, and whether we’re matching historic ironwork rather than installing standard components. Every quote is agreed before work starts, and that number doesn’t change at the door. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Pasadena
We work all over Pasadena, from the flatlands of 91103 to the hillside estates of 91105 and everything in between. Response time for repairs is typically same-day, and emergency calls go to a live person no matter the hour.
- Bungalow Heaven Landmark District (91103)
- Arroyo Seco corridor and hillside estates (91105)
- Orange Grove Boulevard and the west side (91103-91104)
- San Rafael and Linda Vista areas (91105)
- East Pasadena near Hastings Ranch (91106)
Service Area - Cities Near Pasadena
Beyond Pasadena, CA itself, we regularly serve South Pasadena, CA, San Marino, CA, Altadena, CA, East Pasadena, CA, and Alhambra, CA. Scheduling and dispatch are coordinated from our Los Angeles office, but the crew serving Pasadena lives in the region and knows these streets.
Serving Pasadena, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Pasadena and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Pasadena coverage area; if your address is on it, we can help.
Also serving nearby: Pasadena, CA, South Pasadena, CA, San Marino, CA, Altadena, CA, East Pasadena, CA, Alhambra, CA.
FAQs About Gate Repair in Pasadena
Yes. We work in Bungalow Heaven, the 91105 hillside streets, Linda Vista, Madison Heights, and every other neighborhood in and around Pasadena. We’re also familiar with the historic-district requirements in 91103, which matters if your gate needs design review approval before work is finalized.
Our labor rates are the same across Pasadena, South Pasadena, and San Marino. What changes the final number is the age of the gate, the depth of the failed post, and whether we’re matching period hardware from the 1920s. Homes in Pasadena’s historic districts sometimes carry an extra consideration: custom hardware and wind-exposed sites that need more involved welding or bracing. You’ll get the exact price before work begins.
Most non-emergency gate repairs in Pasadena are scheduled within one to two business days. Emergencies where the gate is stuck open or won’t secure get priority same-day attention whenever possible. Call (877) 610-2993 and a live person will give you a real arrival window, not a four-hour dispatch range.
If your gate is sagging, dragging, or refusing to open, call us at (877) 610-2993. We’ll answer with a live person, tell you honestly what’s wrong, and quote the full price before any work starts. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise in writing on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks