Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Maywood
Gate access control in Maywood usually means one of three things: a keypad that stopped accepting codes, an operator that quit responding to remotes, or a gate that starts and then gives up halfway. The fix is rarely as simple as swapping a battery, and rarely as expensive as a full replacement. Most of what we see in Maywood is older equipment on older gates, and a lot of it can be brought back to life the same week. Call (877) 610-2993 and a live person answers, day or night. That’s Hal Gatewood’s way of doing business, and it’s been that way since 2001.
Why Gatewood Fence & Gate Is Maywood’s Preferred Gate Access Control Company
Maywood isn’t a place where you can throw a rock without hitting a wrought iron gate. The city is packed tight, street after street of small bungalows with gate posts set close to the curb. We’ve worked on 58th Street near Maywood Avenue, around the streets off Slauson, and through the blocks near Alamo Avenue enough to know the patterns: narrow driveways, 40-year-old operators, and a lot of rust in the hinge posts. It’s not abstract to us. It’s our regular Tuesday.
Hal Gatewood’s name is on the shop and on every invoice. The company has been locally owned and owner-operated since 2001. If something isn’t done right, the 90-Day Done Right Promise is in writing. One call brings him back. No runaround, no ticket queue. Maywood homeowners tell us they’ve had enough of national outfits quoting one number on the phone and presenting another at the door. We quote a price before any work starts, and that’s the price. Seniors and veterans get a permanent 10% discount on every job. That’s not a promotion. It’s policy.
When a gate stops responding in Maywood, you don’t want to wait three days for a callback. We answer live. We schedule for Maywood like it’s our own backyard, because it practically is. Our crews are background-checked and uniformed, and the person who shows up knows why a gate on a 9-foot-wide driveway bends the way it does.
Our Gate Access Control Services in Maywood
Keypad Entry
Old keypads on Maywood gates tend to die in two ways: the keypad itself weathers out from years of morning marine layer and afternoon sun, or the control board behind it can’t read the signal anymore. We can typically match a new keypad to the existing operator, and in many cases we can add keypad entry to a gate that never had it. For Maywood bungalows with pedestrian gates, a standalone keypad wired to the main operator is a straightforward retrofit. Expect to pay roughly $450 to $900 for a keypad replacement or new installation, depending on access and whether we’re pulling new low-voltage wire.
Remote Control
When remotes stop working in Maywood, it’s usually not the remote. It’s the receiver, or it’s power to the receiver. We test remotes on the spot and program new ones while we’re there. A standard remote reprogramming or replacement in Maywood runs about $85 to $180 per remote when done as part of a service call, and we won’t sell you a bundle of four when you only need one. If you’ve lost signal entirely on an older operator, we’ll tell you honestly whether a new receiver is worth it or whether the board itself is too far gone.
Phone Entry
Phone entry systems, the kind that ring your cell when a visitor presses the call button, are a natural fit for Maywood’s duplexes and multi-unit lots. A lot of the older systems out here were installed in the 1990s and still run on copper phone lines. When the line died or the homeowner cut the landline, the gate entry went with it. We convert those to cellular-based systems that don’t need a landline at all. Phone entry and intercom retrofits in Maywood typically fall between $750 and $1,400 depending on panel condition and wiring.
Card Reader
Card readers on Maywood gates serve a small but real need: a few units on one lot, a shared driveway, or a small apartment building. The old readers out here are usually magnetic stripe, and they’re failing. Proximity readers are more reliable and less picky about a scratched card. A card reader swap runs about $500 to $950 in Maywood, and that includes programming a starter set of fobs or cards.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
We carry parts and service boards for the brands Maywood gates actually run on: FAAC, BFT, Linear, Viking, and more. Certified across nine major brands. We keep common control boards, receivers, and safety edge parts in the truck, so a repair on a FAAC or Viking operator doesn’t always mean waiting on a UPS truck. The goal is to leave your gate working, not leave you with a promise and a trip charge.
Common Gate Access Control Problems We See in Maywood Homes
- Legacy 1970s and 1980s control boards that won’t talk to anything modern. A lot of Maywood gates were automated during the security wave of the late 20th century. Those boards can’t support today’s smart access or keypad integration. When the board fails, the honest answer is often a full operator replacement, not a board swap, because the new boards don’t fit the old housings. We’ll tell you which path saves money.
- Rust in the hinge post footings from Maywood’s marine layer. The humidity here isn’t coastal, but it’s enough. Water wicks into the post base, the post leans, and the gate sags away from the safety photocell beam. Then the gate stops closing. The access control system didn’t fail. The post did. We reset and weld the post, then realign the sensors before touching the board.
- Vehicle strikes on tight turns bend swing gates out of plumb. Driveways that are 9 to 10 feet wide leave almost no room for a swing arc. People back out, clip the gate, and now the frame is sprung. The operator jams. The rack and pinion teeth strip. This is the single most common access control failure we see in Maywood, and it starts with the gate frame, not the electronics.
- Corroded loop detectors that never let the safety system work. A buried loop detector rotted away by humidity means the gate doesn’t sense a car in the path. The gate closes on vehicles, or refuses to open. On 58th Street we found a loop detector so far gone the homeowner had never seen his UL 325 entrapment protection function at all. We replaced the loop and added a photocell pair before the new operator went in.
Pricing for Gate Access Control in Maywood, CA
Here are straight numbers for Maywood’s market. A basic keypad entry replacement runs $450 to $900. Remote programming or replacement: $85 to $180 per remote on a service call. Phone entry conversion to cellular: $750 to $1,400. Card reader swaps: $500 to $950. Video intercoms and smart access additions run higher, typically $1,200 to $2,600, depending on whether we’re tying into an existing operator or replacing the whole head unit. The price we quote is the price you pay. It’s agreed before any work starts. Estimates are free, and we don’t charge a trip fee anywhere inside the county. A free second opinion on any written estimate from another company is also part of how we work. Call (877) 610-2993.
We Also Serve Cities Near Maywood
Our gate access control work regularly takes us into Cudahy, Commerce, Huntington Park, and Walnut Park. Many of those neighborhoods share Maywood’s housing stock and climate, so the same rust patterns and tight driveway problems show up there too. If you’re in Maywood or any of the nearby cities, our Gate Access Control team covers the area without the suburban sprawl delay. Learn more about how we serve Maywood specifically.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Maywood
Yes, and in Maywood it’s often the only fix that lasts. A swing gate on a 9-foot driveway will get hit again. A slide gate tucks against the property line instead of swinging into the driveway, but the catch here is that standard slide tracks need room too. On Maywood’s tight lots we usually specify a low-profile rack and pinion track that sits nearly flush, which most neighboring-city operators don’t stock as standard. A slide gate conversion in Maywood typically runs $3,800 to $7,500 depending on gate weight, track type, and whether we can save the existing operator. Call (877) 610-2993 for a straight quote.
Condensation from the marine layer is shorting a sensor or finding its way into a corroded connection. The board sees a false obstacle or loses signal from the loop detector, so it stops. This is extremely common on gates with unsealed control boxes and aging wiring. We can often fix it with a sealed enclosure, new connectors, and a replacement photocell without replacing the whole operator. A service call in Maywood runs about $140 to $260 for labor plus parts, and we’ll tell you the real number before we start.
In most cases, yes, if the gate frame and hinge posts are still straight. We weld on site, so the gate stays in your driveway. Adding a keypad to an existing operator in Maywood runs about $450 to $900. If the operator itself is a 1970s or 1980s control board, it may not support a modern keypad, and we’ll be straight with you about whether a new operator is the cheaper long-term answer.
On Maywood’s narrow driveways, a swing gate that’s been hit once will likely get hit again. If the frame is bent and the post is leaning, repairing the swing gate typically costs $600 to $1,400 for welding and post reset. But if this is the second or third strike, converting to a slide gate is usually the smarter money. We’ll give you both numbers in writing before any work starts. Then you decide, not us.
Not necessarily. If the manual operation is fine and the gate opens reliably, you may only need a new receiver or keypad to get remote or coded entry back. Smart access, like phone-app control or video intercom, is optional and we won’t push it on a gate that doesn’t need it. A smart access retrofit in Maywood runs about $1,200 to $2,600 when it makes sense. If the old LiftMaster is a pre-UL 325 unit without proper entrapment protection, we will recommend replacing it for safety, and we’ll explain exactly why.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, proudly serving Maywood and southeast LA County since 2001.