Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Commerce, CA
Gate repair in Commerce, CA is almost always about heavy-duty commercial slide gates, not residential driveway units. The warehouses, distribution centers, and manufacturing yards that line the I-5 and rail corridors depend on steel cantilever and v-track gates that open and close hundreds of times a day. When one stops moving, trucks stop moving with it. That’s the job, and that’s what we’re built for. Call (877) 610-2993 and you’ll reach a live person who has actually welded a cantilever gate back together on Bandini Boulevard.
Why Commerce Homes Are Different
Let’s be honest about what “homes” means in Commerce. This is one of California’s most heavily industrialized cities, with residential land making up a tiny fraction of its footprint. The overwhelming majority of gate work here involves commercial and industrial slide gates at warehouses, logistics hubs, and manufacturing facilities, not ornamental iron residential units. That changes everything about how we approach the work.
The dense concentration of manufacturing operations off the 5 generates airborne grease and particulate matter that settles into gate motor housings, coats roller bearings, and jams track channels faster than in any residential town nearby. A gate in Commerce needs its rollers and tracks cleaned and lubricated far more often than one in Maywood or Cudahy, plain and simple, because the air itself works against the hardware. On top of that, nearly every gate here is sized for tractor-trailers, not passenger cars. These gates run hundreds of cycles per day under semi-truck and forklift traffic, so bottom rollers, track welds, and limit switches wear down at a pace that would surprise a residential technician. An operator that lasts a decade in a residential setting may need major service within 18 months here.
Gate Repair in Commerce
Gate repair in Commerce usually means a high-cycle commercial slide gate that has failed under constant truck traffic. The typical repair call here is a gate stuck halfway open at a distribution bay, a roller that has flattened under forklift loads, or a limit switch that has drifted so far the gate slams into the end stop. We fix the actual cause, not the symptom, and we do it on site with a welding rig so your truck entrance stays operational.
Most of the gate repair work we do in Commerce falls into a few repeat categories. A Gate Repair call from a warehouse manager on Washington Boulevard is rarely a mystery to us. Show me the gate closing on its own and I’ll show you where it’s failing.
Bottom Roller and Track Repair
Bottom rollers on Commerce gates flatten from the constant weight of semi-trucks and forklifts crossing the threshold. A roller that would last five years on a residential gate can be done in 18 months here. We replace flattened rollers with commercial-grade sealed-bearing units sized for the load, and we inspect the track channel for debris from forklift tires that grinds away at the rollers. Bottom roller or track wheel replacement runs $200-$400 per roller in Commerce, depending on whether the gate is a light v-track or a heavy cantilever.
Track and Rail Welding
Track welds crack under the repeated impact of heavy panels rolling over small imperfections. When a v-track gate starts to bind or derail, the failure is almost always in the track channel, not the gate panel itself. We grind, prep, and re-weld the track on site, then verify the panel rolls true before we pack up. Weld repair on a steel slide gate in Commerce typically runs $250-$500 depending on crack length. Fix the panel without the post and you’ll fix it twice.
Limit Switch and Safety Edge Repair
Limit switches on high-cycle Commerce gates drift constantly. A residential operator might cycle a dozen times a day. A Commerce distribution gate can run 300 to 400 cycles in the same window. That means limit switches wear out faster and safety edges take repeated hits from truck traffic. We service both, set the limits so the gate stops where it should, and test the entrapment protection before we leave. Limit switch or safety edge repair in Commerce typically runs $180-$350.
How much does gate repair cost in Commerce?
Gate repair in Commerce typically costs $180 to $500 for most roller, track, and limit switch work. A full commercial operator rebuild runs $400 to $900. Every job includes a free diagnosis and a written price agreed before any work starts. Call (877) 610-2993 for an exact quote on your gate.
Can you come today if my gate won’t close?
Yes. Same-day service is available for commercial and emergency repair calls in Commerce, especially when a security gate is stuck open after hours. A stuck-open gate at a Commerce warehouse is an invitation you don’t want to leave out. We answer live 24/7, and we’ll tell you exactly when someone will be there. Call (877) 610-2993.
Gate Installation in Commerce
Gate installation in Commerce usually means a heavy-duty steel slide gate built for semi-truck traffic, not a decorative driveway gate. Most of the work we quote here runs between $6,800 and $22,000 depending on gate length, operator type, and how much site prep the property line dictates. If you manage a warehouse, distribution yard, or manufacturing facility in Commerce, call (877) 610-2993 and we’ll schedule a free on-site measure with a written price before any work starts. Gate Installation work here is about sizing the gate to the truck traffic, not the other way around.
Sliding Gate
Most gate installations we do in Commerce are sliding gates, because a swing gate needs room to arc and Commerce rarely has that room. Tight setback lines, shared access easements, and building walls right at the property line all push toward slide gate design. We build cantilever and v-track slide gates sized for semi-truck clearance, and we run the operator wiring, safety edges, and loop detectors the same day we set the posts. A 30-foot cantilever slide gate with a commercial operator typically runs $9,500 to $18,000 in Commerce.
Double Gate
Double gates solve a specific Commerce problem: you need a wide opening for trucks but you also have forklifts and pedestrian traffic that shouldn’t wait for a 40-foot panel to travel. We split the gate into two leafs, sync the operators, and add center safety sensors so the panels close without pinching a forklift tire or a delivery driver. Double slide gates on warehouse entrances in Commerce usually run $14,000 to $22,000 depending on total opening width and operator pairing.
Security Gate
Security gates in Commerce are not ornamental. They’re steel barriers built to control who gets in and out of yards where inventory sits in the open. We install cantilever gates with anti-climb mesh infill, magnetic locks, card readers, and vehicle detection loops sized for semi-trucks. Security gate installation in Commerce starts around $8,000 and climbs with the access control package.
How much clearance do I need behind a sliding gate in Commerce if the property line is right at the building wall?
None, if you use a cantilever gate. Cantilever slides ride on rollers above the ground and never enter the space behind the opening, so they work when the building wall sits right at the property line with zero setback. A v-track slide needs roughly the gate panel’s full width in clear track space behind the opening, which most Commerce sites do not have. Call (877) 610-2993 and we’ll measure your site and tell you which one works.
Do I need a permit to install a gate in Commerce right up against the railroad right-of-way?
Yes, more often than not. Commerce is crisscrossed by rail corridors, and any gate post or footing within the railroad’s right-of-way or influence zone usually requires railroad approval and possibly an encroachment permit through the city. We handle the coordination and drawings, and we will not set a post on railroad property without written approval. Call (877) 610-2993 with your address and we’ll check the railroad map before your quote.
Gate Motor & Opener in Commerce
If you manage a warehouse yard, distribution center, or manufacturing facility in Commerce, you already know that a dead gate motor is a security hole and a logistics bottleneck that costs you money by the hour. Gate motor repair in Commerce typically runs $280 to $650 for most commercial operator failures, and we can usually be on site the same day you call. Gate Motor & Opener work here is about duty cycle. A residential-rated opener installed at a Commerce loading dock fails within weeks. The motor wasn’t built for semi-truck frequency.
Motor Repair
Most motor failures in Commerce fall into a few categories: burned contacts, failed capacitors, stripped limit cams, and water or grease intrusion into the housing. The airborne particulate from nearby manufacturing operations accelerates fouling of motor housings and internal components. We open the unit, diagnose the actual fault, and repair it rather than telling you the whole motor is shot. Simple fixes like capacitor replacement run on the lower end of the $280-$650 range. Board replacement or motor rebuild runs higher.
Motor Installation
A new gate motor in Commerce usually runs $1,800 to $4,600 installed, depending on gate weight, cycle rating, and whether we’re mounting a new operator or retrofitting an existing pad. Commercial slide gates with semi-truck clearance need operators rated for high cycles, not the residential units you’ll find at a big-box store. We’ll spec the right motor for the gate, not just sell you what’s on the shelf. Installation includes mounting, wiring, safety edges if required, and limit switch setup.
Slide Motor
Slide gates are the workhorse of Commerce. The bottom rollers, track welds, and limit switches on a high-cycle slide gate take a beating from hundreds of daily cycles. We see rollers that should have been replaced six months ago, track welds that cracked under truck vibration, and limit switches that drifted so far the gate slams into the end stop. We fix the actual cause, weld the track back solid if needed, and set the limits so the gate stops where it should. Every time. A new crash-rated operator system for a high-security yard can exceed $6,000.
How fast can you respond to a gate motor failure in Commerce?
In most cases, we can have someone on site in Commerce the same day you call, often within a few hours for emergency situations like a gate stuck open at a secured yard. (877) 610-2993 is answered by a live person 24/7, and Hal or one of his crew will let you know when they can be there. If it’s a true emergency and you’re inside the county, we don’t charge a trip fee.
How much does gate motor repair cost in Commerce compared to nearby cities?
Commerce pricing is generally in line with the surrounding area, but the nature of the work is heavier. A typical repair runs $280 to $650, same as Bell Gardens or Maywood, but Commerce jobs more often involve commercial-grade operators, heavier gates, and faster turnaround demands. Installation of a new commercial motor starts around $1,800. The quote you get is the price you pay, agreed before any work begins. Call (877) 610-2993 for a free estimate.
Gate Access Control in Commerce
Gate access control in Commerce usually means one thing: a commercial slide gate at a warehouse or distribution yard that has to keep working while trucks move through all day. That’s the reality of this city. Nearly every gate we service here is heavy steel, high-cycle, and unforgiving when it fails. If your gate won’t read a card, won’t answer a phone entry call, or drops offline midday, call (877) 610-2993. We answer live, and we know Commerce’s industrial corridors. Gate Access Control work here is about keeping trucks moving while keeping the wrong people out.
Card Reader Systems
Card readers on Commerce gates take a beating. The airborne grease and particulate from nearby manufacturing settles on reader housings and card slots, which means readers that would last five years in a residential city need cleaning and recalibration far more often. We install and service HID-compatible and proprietary card readers on existing slide gates, and we wire them into your current operator if it’s worth keeping. A typical card reader install or replacement on an existing Commerce slide gate runs $450 to $950, including wiring and programming.
Video Intercom
At Commerce’s distribution yards, a video intercom isn’t a convenience. It’s how your receiving clerk screens a truck without walking out to the gate. We install video intercom systems that tie into existing card readers and phone entry, with a screen inside that shows you exactly who’s at the gate. Video intercom systems in Commerce start around $1,200 and go up from there when you add multiple stations or app-based remote answering.
Loop Detectors
Loop detectors fail more often in Commerce than almost anywhere else we work. Constant forklift and semi traffic flexes the pavement, which eventually breaks the buried loop wire. We diagnose loop failures with a meter before we dig, so you don’t pay for a new operator when all you needed was a loop repair. Loop detector repair alone in Commerce is generally $250 to $500.
Why do gate access control systems in Commerce need more frequent maintenance than those in nearby residential cities?
Commerce gates run hundreds of cycles per day under semi-truck and forklift traffic, compared to maybe a dozen daily cycles in a residential city. The elevated airborne grease and particulate from nearby manufacturing also fouls motor housings, rollers, and sensors faster. A gate here needs cleaning, lubrication, and part replacement on a much shorter interval before it fails mid-cycle. Call (877) 610-2993 for an exact quote. Estimates are free.
Can you install a card reader and video intercom on an existing commercial slide gate in Commerce without shutting down truck traffic?
Yes. We do these installs in place, often with trucks still moving through the adjacent lane. Our crew works around your operation, not the other way around. We wire the card reader and video intercom into the existing operator while the gate stays in service except for short test cycles. Call (877) 610-2993 to schedule a walkthrough.
Gate Parts & Welding in Commerce
Heavy industrial gates in Commerce don’t fail politely. They bind, derail, or wedge themselves open at 5:45 a.m. with a line of semi-trucks waiting at the Bandini Boulevard entrance. When that happens you need gate parts and welding done on site, not a company that wants to haul your gate to a shop and leave your lot unsecured for a week. Our Gate Parts & Welding crew runs a full welding rig into Commerce and fixes the gate where it sits, on its own track.
Hinge Replacement
On swing gates, hinge replacement in Commerce usually means upgrading from undersized residential hardware to heavy-duty commercial barrel hinges or weld-on pintle hinges rated for the panel weight. Older industrial lots in the 90101 zip code often have gates hung on hinges that were under-spec’d when the building went up. We cut the old hinge off, weld the new one, and align the gate so it closes square instead of dragging the latch post. Custom welding work is quoted by the hour at $145 to $185, with a written estimate before we start.
Post Replacement
Post replacement is where repair-first discipline matters most. A gate sags in the hinge post, not in the middle, and that is where we start. In Commerce, gate posts set in constrained industrial lots near Washington Boulevard often have rust damage below grade where truck washdown water and airborne moisture collect. We weld reinforced post footings and set them in concrete sized for the lateral load, not the old post’s footprint. Post replacement with reinforced footings runs $650 to $1,200 in the 90101 zip code, driven mostly by the depth of the footing and truck lane access.
Rail Repair
Commercial slide gates along the rail corridor and near the I-5 interchange carry hundreds of cycles daily, and the rail is the first component to crack. We weld cracked rail sections, straighten bent track, and replace worn weld-on rail segments in place so the gate doesn’t have to come down. Track rail repair, including grinding, welding, and alignment, typically lands between $350 and $700 in Commerce. If the track is too far gone to weld safely, we’ll tell you, and we’ll quote a rail replacement before we ever strike an arc.
How often should a high-cycle slide gate roller be replaced on a distribution center gate in Commerce?
On a Commerce distribution gate cycling 200 to 400 times a day under semi-truck traffic, bottom rollers typically need inspection every 90 days and replacement every 12 to 24 months. A gate operator that would last a decade in a residential setting may need major service within 18 months here. We track your gate’s cycle count and roller wear during routine service so you replace rollers on schedule, not after a failure. Call (877) 610-2993 to set up a maintenance visit.
Can you weld a repair without closing our only truck entrance for a full day?
Yes. Most rail repairs, roller swaps, and post work in Commerce can be done one-half lane at a time, keeping a single truck lane open while we weld. We stage our truck and welding equipment on the far side of the gate, cone off the work zone, and coordinate with your yard manager so inbound and outbound traffic keeps moving. The gate may be inoperable for 45 to 90 minutes during the final weld. Call (877) 610-2993 and we’ll work around your schedule.
Brands We Service in Commerce
We service and stock parts for the major commercial gate brands that show up in Commerce, including Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, limit switches, and receiver parts on the truck so a same-day repair doesn’t turn into a week-long wait. Check our brands page for the full list.
Pricing for Gate Repair in Commerce, CA
| Service | Typical range in Commerce |
|---|---|
| Track cleaning and roller lubrication | $150-$250 |
| Bottom roller or track wheel replacement | $200-$400 per roller |
| Limit switch or safety edge repair | $180-$350 |
| Weld repair on a steel slide gate | $250-$500 |
| Commercial operator rebuild | $400-$900 |
| Gate motor installation (commercial) | $1,800-$4,600 |
| Card reader install or replacement | $450-$950 |
| Phone entry system with new loop detector | $800-$1,600 |
| Video intercom system | $1,200-$2,800 |
| Loop detector repair | $250-$500 |
| Custom welding (per hour) | $145-$185 |
| Post replacement with reinforced footings | $650-$1,200 |
What pushes the price up in Commerce is gate length, operator duty cycle, site prep, and whether we’re working around live truck traffic. Every price is quoted and agreed in writing before any work starts. No surprise invoices, no adding things on at the door.
Neighborhoods We Serve in Commerce
Our crews work throughout Commerce, and we know the gate demands in every corner of the city. Typical response time for repair calls in the area is same day or next morning, depending on call volume. We’re already familiar with the property lines, truck lanes, and setback realities along these corridors.
- Bandini Boulevard corridor
- Commerce Industrial Center
- Eastern Avenue warehouse district
- Washington Boulevard rail corridor
- Slauson Avenue industrial area
Service Area - Cities Near Commerce
Beyond Commerce itself, we run crews through the surrounding industrial and residential cities nearby. That includes Commerce, CA, Maywood, CA, Cudahy, CA, Bell Gardens, CA, East Los Angeles, CA, and Montebello, CA. No trip charge inside the county, and a live person answers the phone 24/7.
Serving Commerce, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Commerce and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Commerce coverage area; if your address is on it, we can help.
Also serving nearby: Commerce, CA, Maywood, CA, Cudahy, CA, Bell Gardens, CA, East Los Angeles, CA, Montebello, CA.
FAQs About Gate Repair in Commerce
We cover all of Commerce, including the warehouse districts along Bandini Boulevard, the industrial corridors near the 5 freeway, the rail-served yards, and the few residential pockets near the eastern boundary. If your property is in the 90101 ZIP code or anywhere else in Commerce, we’ll come out. No subcontracted crews, no outsourcing. Call (877) 610-2993 to confirm your address.
Yes. Automatic gates in California must have entrapment protection: photo eyes, contact edges, or both, depending on the gate type and operator. We test yours by measuring the force the gate applies before reversal and by checking every sensor in the circuit. If your gate reverses on empty air or doesn’t reverse at all, call us before someone gets hurt. Schedule a free safety check at (877) 610-2993.
Yes. Every job we do in Commerce carries the 90-Day Done Right Promise in writing. If the motor fails or the gate drifts out of adjustment within 90 days, Hal comes back and makes it right. No arguments, no pro-rated nonsense. His name is on the shop and on every invoice, and he stands behind the work because he’s the one who did it. Call (877) 610-2993 anytime.
If your gate is down in Commerce, don’t wait until morning. A stuck-open gate at a warehouse yard is a security risk that costs you money by the hour. Call (877) 610-2993 now for a free estimate, and you’ll speak to a live person who knows Commerce gates and will give you a straight answer on when we can be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly