Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control repair in Irving usually runs $165 to $480 depending on whether we’re swapping a keypad, replacing a control board, or retrofitting an entire HOA entrance with a new operator and card reader. Most calls in Irving are same-day or next-morning, and we carry the boards, keypads, and loop detectors for the brands already installed across Las Colinas and Valley Ranch. If your gate keypad went dark or your remote stopped tripping the opener, call (877) 610-2993 and a live person picks up, not a voicemail.
Irving splits into two very different gate worlds. The west side, the 75060 and 75061 and 75062 zip codes, runs heavy on chain-link and wood privacy gates. The Las Colinas corridor and Valley Ranch, 75039 and 75037, are dominated by ornamental iron automated gates tied to HOA security systems. We work both, and we have been doing it long enough to know which panel is on which street before we even pull up.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Access Control Company
Hal Gatewood has been at this since 2001, and his name is on the shop. The shop serves Irving out of our Dallas-Fort Worth office, with a published address and license number anyone can look up. We are not a franchise with a rotating crew. The person who answers your call is the same person who stands behind the work.
Irving homeowners and property managers keep our number saved because we fix what other companies want to replace. A Doorking keypad that loses its backlight does not usually need a new keypad. It needs a power supply diagnosis and maybe a new board. We will tell you that, show you the bad part, and hand you a written price before any work starts. Every job leaves with the 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No fine print, no runaround.
We answer the phone around the clock. HOA boards call at 6:00 a.m. when the entrance gate is stuck open. A homeowner calls at 9:00 p.m. because their remote quit. A live person answers every time. Not a dispatch queue, not a call center three states away. That matters when your gate is the only thing between the street and your backyard.
Our Gate Access Control Services in Irving
Keypad Entry
Irving’s Valley Ranch HOA entrances lean heavily on keypad entry, and a lot of those panels are originals from the 1980s build-out. We replace keypads, yes. But we also rebuild the older Doorking and Linear cans, swap the boards, and wire the keypad back into the gate operator the way it was meant to run. On the residential side in west Irving, a new keypad install at a driveway swing gate typically runs $185 to $320.
Phone Entry
Phone entry is the upgrade most Irving HOA subdivisions want and the one that exposes weak installs. A phone entry system has to talk to the gate operator, the power supply, and sometimes the fire department override. We see a lot of phone entry units in Valley Ranch that were spliced into legacy Doorking panels and never tested under load. We pull fault codes, run the system through a full access cycle, and make sure the gate closes on its own after every entry. No gate closing on its own means something is failing, and we will find it.
Card Reader
Las Colinas corporate campuses and multi-tenant office gates depend on card readers tied to access control software. A card reader that reads sometimes but not always is usually a wiring or grounding issue, not a bad reader. We diagnose before we replace, and when we do replace, we use readers that talk to the existing panel so you are not forced into a whole-system upgrade because one reader died. Card reader service calls in Irving generally run $140 to $260 for the diagnosis and repair, before any hardware.
Solar Gate Opener
Not every gate in Irving sits next to a transformer. The acreage-style properties on the edges of Irving and the long driveway entrances in 75063 often run solar gate openers because pulling mains power to the gate is not practical. Solar works here nine months of the year. The winter weeks with low light, the panel loses charge, the opener stalls mid-travel, and the motor throws an overcurrent fault. We size the panel and battery to the operator, not the other way around, and we test the charge controller under load instead of just reading voltage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We carry parts and know the fault codes for the brands Irving actually has installed. Linear panels come up constantly in Valley Ranch HOA entrances. DoorKing keypads and operators are all over the Las Colinas office gates and older Valley Ranch builds. Viking shows up on the higher-end residential slide gates in 75039. Ghost Controls is the brand we see on a lot of the newer solar openers at acreage entrances. We stock replacement boards, keypads, remotes, and loop detectors for all of them, so most Irving repairs go from phone call to finished job in one visit.
Common Gate Access Control Problems We See in Irving Homes
- Blackland clay heaves the hinge post. Irving sits on Blackland Prairie soil that swells hard after rain and shrinks in drought. The post moves, the gate binds, the operator overloads, and the limit switch burns out. The gate is not failing mechanically; the ground moved under it.
- Winter storms kill control boards. The February 2021 ice storm froze operator housings across Irving, cracked welds on ornamental iron, and cooked control boards in HOA entrance gates all at the same time. We still see boards with corrosion from that week causing intermittent faults.
- 1980s Valley Ranch panels no longer talk to smartphones. A lot of original Doorking and Linear panels in Valley Ranch simply do not support modern smartphone entry. The HOA wants phone access, the panel cannot do it, and the repair becomes a retrofit.
- Lightning strikes loop detectors. A lightning hit near a Valley Ranch entrance gate will spike the loop detector and leave the gate stuck open with the card reader offline. The keypad looks dead. It is usually the detector and a fuse, not the whole system.
Pricing for Gate Access Control in Irving, TX
Here is what Irving gate access control work actually costs, based on the calls we run every week.
- Keypad replacement or rebuild: $185-$340, depending on brand and whether the wiring survived.
- Control board swap on a Doorking or Linear panel: $240-$480 including the board and programming.
- Card reader diagnosis and repair: $140-$260.
- Phone entry system install or retrofit: $425-$900, depending on whether it ties into an existing panel or needs a new one.
- Solar gate opener repair or battery replacement: $190-$410.
- Full access control retrofit on a Valley Ranch HOA entrance: $1,100-$3,200, quoted on site after we see what the existing panel and operator can do.
Those are honest Irving market ranges. What moves the number is the condition of the existing panel, the age of the operator, and whether the wiring is original. The price gets quoted and agreed before any work starts. No trip charge inside the county, seniors and veterans always get 10% off, and any repair over $200 can take $40 off. Call (877) 610-2993 for a free estimate. We will tell you over the phone what we think it is, and then we will show you in person before anything gets touched.
We Also Serve Cities Near Irving
We run service calls to Irving daily, and the same crews cover Farmers Branch, University Park, Highland Park, and Dallas. If you live just over the line in one of those cities, the response time does not change much. For anything involving Gate Access Control, one phone call covers the whole area. Call (877) 610-2993.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
If the keypad still beeps when you press buttons but the gate does not move, the keypad is usually fine and the control board or a fuse is the problem. If the keypad is dead silent with no backlight and no beeps, we test incoming power first, then the keypad itself. In Valley Ranch, we see a lot of original Doorking keypads with good keypads and dead boards. The board gets swapped, the keypad stays, and the HOA saves several hundred dollars. Call (877) 610-2993 and we will diagnose it before quoting anything.
Yes. Phone entry installs fine on older swing gates as long as the operator still has a functioning accessory input. We have added phone entry to gates in 75063 that still run openers from 20 years ago. The install includes running the phone line or cellular module, wiring the relay into the operator, and testing the full open-close cycle with the auto-close safety loop. Most phone entry retrofits in Irving run $425 to $900. Call (877) 610-2993 for a written quote.
Because the Blackland clay under the gate track or the gate posts moved. When that soil swells after rain, it can lift a section of track or tilt a post enough that the gate binds mid-travel, the operator reads the resistance as an obstruction, and it reverses. The fix is a realignment, sometimes a post reset, and a fresh set of limit adjustments, not a new motor. We see this exact call in Irving after every long wet stretch.
Every automatic gate operator in the United States must comply with UL 325, the standard that requires entrapment protection like monitored photocells, reversing edges, and auto-close safety loops. We test every one of those devices on every access control job we do in Irving. If a safety edge is dead or a photocell is calling good when it is misaligned, we will find it and tell you. This is not optional. A gate that closes on a car or a kid is a liability no HOA wants.
Because the panel is not getting enough sun to recharge the battery, and the battery no longer holds enough charge to run the operator through a full cycle at night. In Irving, the low-light weeks from November through February hit solar gate openers hard, especially units with undersized batteries. We test the panel output and the battery under load, then replace what is actually failing, usually the battery. Call (877) 610-2993 and we will bring a load tester, not a guess.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been fixing gates since 2001, and he still picks up the phone.