Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
Gate repair in Irving usually costs between $140 and $780, depending on whether it’s a hinge replacement, a full gate realignment, or a control board issue. Most repair calls in the city are HOA-driven, and Gatewood Fence & Gate handles them the same way you’d want a neighbor to: show up on time, fix the problem in the driveway, and stand behind the work in writing. If your gate is acting up anywhere from Valley Ranch down to the old neighborhoods west of Belt Line, Hal Gatewood answers his phone live, 24 hours a day, at (877) 610-2993.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Repair Company
Hal has been repairing gates since 2001, and his shop sits in the Dallas-Fort Worth metro, with dispatch and scheduling coordinated from that office and crews working Irving locally. When an HOA manager calls about a frozen operator in Las Colinas or a sagging swing gate in Valley Ranch, the person who answers is not a call center. It’s a live voice, and that voice belongs to a company whose owner puts his name on every invoice.
Our Irving customers tell us the same thing over and over: they’ve been burned by bigger companies that quoted a price and changed it at the door. That does not happen with us. The price is agreed before any work starts, and the 90-Day Done Right Promise comes in writing on every job. If something is not right, Hal comes back. No runaround.
We also know Irving’s gates in a way an outsider doesn’t. The rack and pinion teeth on a 40-foot slide gate off MacArthur Boulevard wear differently than a swinging driveway gate on a 1960s tract lot in west Irving. We work both, and we stock parts for both. That’s not a marketing line; it’s just what happens when you fix gates here for over two decades.
Our Gate Repair Services in Irving
Gatewood offers full Gate Repair service in Irving, and most jobs fall into one of the four categories below. We repair before we replace, and we weld on site so your gate stays in your driveway where it belongs.
Electric Gate Repair
Electric gates are standard across Las Colinas corporate campuses and Valley Ranch HOA communities. We diagnose and repair operator motors, control boards, safety loops, and photo eyes without ripping out a system that still has years left. A control board failure in a Doorking or LiftMaster panel is a repair job, not a replacement job, unless the component is truly fried. We pull fault codes before we touch anything else.
Automatic Gate Repair
Automatic gate repair near MacArthur Boulevard and the surrounding HOA grids is a big part of our week. These gates cycle dozens of times a day, every day, and the wear shows in places that surprise people: rack and pinion teeth shear, guide rollers flatten, and chains stretch. We replaced a worn rack and pinion set on a 40-foot slide gate at a Valley Ranch HOA off MacArthur, then integrated the new operator into the existing DoorKing 1833 panel without disrupting resident keypad entry or the loop detector at the exit lane. That’s the level of access-control awareness an Irving job demands.
Hinge & Post Repair
Here’s the thing about Irving specifically: the Blackland Prairie clay under the city swells and shrinks with every rain cycle, and it shoves gate posts out of plumb over time. A sagging gate is not a middle-of-the-gate problem; it’s a hinge post problem. We cut out rusted hinge barrels, weld in new ones, and reset posts with concrete that suits clay movement. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a swing gate binds against the operator or a slide gate rides up on its wheels, realignment is the fix, not replacement. We see this constantly in the older neighborhoods along Belt Line and Story Road in Irving, where driveway gates have decades of accumulated settling. We plumb the posts, adjust the hinges, re-set the wheels, and the gate travels clean again. The operator gets a load off its motor, and you stop hearing that grinding sound.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re certified to service several major gate brands, and for Irving customers that means something practical: we show up with the right parts. Most local jobs involve operators and access panels from DoorKing, LiftMaster, Viking, Elite, and occasionally Ghost Controls. We can pull fault codes from a DKS 1833 entry system and put our hands on the same logic. When you call at 2 a.m. and Hal answers, he knows whether the part you need is on the truck or minutes away. That matters when a Las Colinas gate controls the only entrance for hundreds of tenants.
Common Gate Repair Problems We See in Irving Homes
These four failures account for most of the calls we run around Irving, especially in Valley Ranch and Las Colinas. You’ll notice a pattern: the ground moves, the hardware ages, and the operator takes the blame even when it was never the operator’s fault.
- Gate posts heaving and tilting: Blackland Prairie clay swells and shrinks, and posts take the hit. The gate looks broken, but the post has shifted. We reset and realign it.
- Frozen or cracked welds on ornamental iron: Ice storms like February 2021’s Winter Storm Uri freeze the metal and crack welds along the scrollwork. We weld them back on site without hauling the gate off.
- Rack and pinion failures on slide gates: Valley Ranch’s original 1980s slide gates are hitting 35-40 years old, and the rack gear teeth snap under daily HOA traffic. We carry replacement rack sections and weld them in.
- Access control boards losing programming: Power surges during North Texas storms scramble Doorking and Linear boards. HOA managers call us to restore resident codes and keypad sync before the morning rush.
Pricing for Gate Repair in Irving, TX
You deserve actual numbers. Here’s what we typically see in Irving:
- Hinge replacement or box weld on a single swing gate: $140-$330
- Post realignment with concrete reset (common in West Irving clay): $260-$550
- Operator motor replacement on automatic gates (Viking, DoorKing, LiftMaster): $420-$780
- Control board diagnosis and replacement (DKS, Linear, FAAC): $190-$680
- Full weld and rust repair on ornamental iron panels: $310-$675
These are real ranges from jobs we’ve run in Irving’s 75014, 75015, 75016, 75017, 75037, and 75060 zip codes. The variance usually comes from part availability and gate size. What doesn’t vary: the price you hear before work starts is the price on the invoice. We also apply $40 off any repair over $200, waive the trip charge inside the county, and give seniors and veterans a permanent 10% discount.
We Also Serve Cities Near Irving
While most of our volume comes from Valley Ranch, Las Colinas, and the older Irving neighborhoods, we regularly run through Farmers Branch, University Park, Highland Park, and Dallas. If you’re in a nearby HOA or on a strip of county road, call and ask. Hal will tell you straight whether he can get to you that day, or if he’ll set a window and actually keep it. You’ll never hear a flat “we don’t go there.”
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Irving
Start with your management company’s modification form, not with the gate. Every Valley Ranch and Las Colinas association has its own standards for style, height, finish, and hardware, and replacing a gate with something outside those standards can cost you a stop-work order. We prepare spec sheets and material lists your board can review, and we’ve worked with enough HOA managers in Irving that we know how to keep the process moving.
If you’re not sure where to start, call (877) 610-2993 and describe your association. Hal can usually point you to the right person.
Yes. Those mixed-use gates are the most access-control-complex jobs we handle, because you’re dealing with resident keypads, tenant card readers, delivery vendor codes, and sometimes a security desk. We integrate new operators into existing Doorking or Linear panels without dropping resident access. We’ve done it on MacArthur-adjacent campuses and across Las Colinas proper. The operator gets fixed; the access system keeps its programming.
Call (877) 610-2993 with the gate model and panel type, and Hal will tell you what’s feasible before anyone drives out.
The Blackland Prairie clay expands and contracts with rainfall, and over years it heaves the post base out of vertical. The gate operator keeps doing its job, but the gate binds, scrapes, or fails to latch. We reset posts with a mix suited to Irving’s soil behavior, and we set the depth properly. A tilting post is a ground problem, not a motor problem.
We repair both. Irving’s gate problems often start at the keyboard, not the motor. We replace keypad faces, reprogram phone-entry units, re-sync card readers, and troubleshoot loop detectors. This is not a side service for us; it’s the core of what Valley Ranch and Las Colinas HOAs ask for. A tech who only knows mechanical gates will lose the call here. We carry the diagnostic tools for Doorking, Linear, and LiftMaster panels on the truck.
Yes. Hal answers at (877) 610-2993 around the clock, and after storms like Winter Storm Uri, the phone rings with operators frozen, welds cracked, and control boards scrambled. We run emergency runs into Valley Ranch and Las Colinas as soon as roads allow. The 90-Day Done Right Promise still applies, even on storm repairs. Call before 9 a.m. and we’ll give you an honest ETA, not a promise we can’t keep.
Call Gatewood Fence & Gate for Gate Repair in Irving
If you’re in Irving and your gate is sagging, stuck, grinding, or just dead, call (877) 610-2993. You’ll get Hal or someone from his crew on the phone, not a queue. We’ll give you a real price before any work starts, and every job comes with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, locally owned and owner-operated since 2001.