Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Guthrie
If your gate is sagging, dragging, or swinging wild after a Logan County storm, we can get it square again. Gatewood Fence & Gate welds on site in Guthrie, repairs the parts worth saving, and fabricates what can’t be found. That matters here more than most places, because a lot of Guthrie gates aren’t the kind you can fix with a trip to a hardware store. For a free estimate, call (877) 610-2993. Hal Gatewood answers, and he’ll tell you straight what the job needs.
We’ve worked on gates all over Guthrie, from the Queen Anne homes near Oklahoma Avenue to the pipe-rail ranch gates out along Highway 33. The soil heaves, the wind pushes, and the old iron holds its own until it finally doesn’t. This page covers what we do, what it costs, and how to spot a repair that’s about to become a bigger problem.
Why Gatewood Fence & Gate Is Guthrie’s Preferred Gate Parts & Welding Company
We’re not a franchise. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on the shop and on every invoice. When you call, a live person answers, 24 hours a day, seven days a week. Not a voicemail. Not a call center. If a gate drops its hinges at ten o’clock at night in Guthrie, you’ll talk to a human who can get someone out.
The difference shows up in the work itself. Our crew welds in your driveway, so your gate never leaves the property. We fix what’s broken and leave the rest alone. You don’t get quoted for a full replacement because a single hinge pin wore out. That’s the repair-first way we’ve always worked. Every job also carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back, no runaround.
We know what Guthrie homes throw at a gate. We’ve cut out rotted post footings along Warner Avenue, straightened wind-torqued frames near Highland Park, and hand-fabricated strap hinges for Victorian iron gates that were forged before Oklahoma was a state. A company without a welder and a forge source can’t do that. We can.
You’ll also get honest pricing before we start. No number that grows when the job is half done. The quote is the quote. If you want to verify who you’re dealing with, our license number and address are published. Hal has been in this trade since 2001, which means he has been around long enough for you to have seen the truck. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Guthrie
Most of the calls we run in Guthrie fall into four categories. Here’s what each one involves, and what we’ve learned about doing them well in this town’s specific conditions. For anything you see here, call (877) 610-2993 and we’ll give you a written estimate before any work begins.
Hinge Replacement
Guthrie’s older gates are full of hinges that don’t match anything sold today. The original 1890s and 1910s strap hinges on historic district gates use pin diameters like 7/16-inch and 5/8-inch. You can’t buy those at a hardware store. We fabricate new hinges to the original dimensions, or machine new pins to fit the old straps, so the gate hangs level and swings without dragging. On newer gates, we stock and install standard hinge kits same-day in most cases.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Guthrie sits on red expansive clay that swells when wet and shrinks when dry. That cycle heaves posts out of plumb and out of line. We dig out the old footing, set a new post in concrete below the frost line, and brace it solid while the concrete cures. If your post has drifted but the gate panel is still good, we often reset the post and keep your existing gate. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Top and mid rails crack in two places most often here: at the weld joints, and where the wind flexes a long span. Straight-line winds over 60 mph aren’t rare in Logan County, and they push gates in ways the original builder never planned for. We grind out the crack, weld it solid, and often add a gusset at stress points so it doesn’t crack in the same spot next spring. For pipe-rail ranch gates outside town, we’ll sleeve a split rail or replace it depending on how much the metal has fatigued.
Custom Welding
This is the service that separates us from a gate repair company that only swaps parts. Our Gate Parts & Welding team welds on site, in your driveway or pasture, with a mobile rig. We’ve fabricated custom strap hinges for Victorian iron, repaired ornate scrollwork, reinforced sagging arch tops, and built new matching pickets to replace ones that were snapped off. Aluminum, steel, wrought iron, or pipe rail. We weld it where it stands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Guthrie
We’re certified to service nine major gate operator brands, including Viking, Ghost Controls, DoorKing, and Elite. That covers most of the automatic gates we see around Guthrie, from the swing operators on acreage east of town to the slide gates on commercial properties along Division Street. We keep common parts in the truck for these brands and can have less-common ones ordered and installed fast. If you have an older operator that’s been patched together for years, ask us to look at it. We’ll tell you if it’s worth saving. Most of the time, it is.
Common Gate Parts & Welding Problems We See in Guthrie Homes
- Hinge posts leaning in the red clay. Guthrie’s expansive clay heaves and shifts every wet-dry cycle, which slowly moves hinge posts out of square. The gate starts dragging on the latch side, and a year later the post is leaning hard. We reset the post and the gate swings free again.
- Wind-torqued frames from storm season. Straight-line winds over 60 mph slip through Logan County during spring thunderstorms. Gates with a long enough span catch that wind like a sail. The frame twists, the hinges bind, and sometimes the post anchor snaps at the base. We square the frame and reinforce the stress points.
- Historic hand-forged hinges and latches failing. Original 1890s and 1910s iron gates are beautiful, but the metal is old. When a strap hinge cracks or a latch pawl wears round, no modern replacement matches. You need a welder who can fabricate the part or find a forge source. We do that work regularly in Guthrie’s historic district.
- Pipe-rail ranch gates sagging at the hinge side. Most acreage gates outside Guthrie hang from pipe posts set in clay loam. Over time the post leans, the gate drops, and the free end scrapes dirt. We cut the welds on the hinge side, true up the post, and reweld. On badly tilted posts, we set a new one and weld the gate back to it.
Pricing for Gate Parts & Welding in Guthrie, OK
Here are the honest ranges for what this work costs in Guthrie. Hinge replacement typically runs $130-$340 for a standard single gate, depending on whether we can machine the old pin out or need to fabricate new straps. Post replacement runs $210-$510 since the old one has to be dug out, concreted, and plumbed. Rail repair runs $90-$275 per rail, including grinding and gusseting if needed. Custom welding runs $120-$450 for most single-part repairs, and full-gate fabrication is priced by the job after a free on-site look. Every price is quoted and agreed to in writing before we light a torch.
We offer $40 off any repair over $200, no trip charge inside Logan County, and a permanent 10% discount for seniors and veterans. If another company has given you a written estimate, we’ll give you a free second opinion on it. Call (877) 610-2993 and we’ll tell you what’s fair.
We Also Serve Cities Near Guthrie
Our crew runs throughout central Oklahoma. If you’re in Guthrie proper or nearby in Edmond, Piedmont, The Village, or Oklahoma City, we’re close enough to get to you. Dispatch and scheduling are coordinated from our Oklahoma City office, but the people who show up at your gate live and work in this area. You’ll get a local crew, not a truck passing through.
Serving Guthrie, OK - Our Local Coverage Area
We’re based in the Guthrie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Guthrie
Yes, in most cases we can weld the crack from the back side and touch up the repair with a rust-inhibiting treatment that blends with the aged finish. We don’t grind or paint beyond the repair area unless you ask us to. The original patina stays put. Call (877) 610-2993 for a free on-site look.
We dig out the old footing and post, then pour a new concrete footing deeper than the seasonal soil movement layer, typically 30 to 36 inches. We plumb the new post, brace it, and let the concrete cure before rehanging the gate. That depth is what keeps it from heaving again next cycle.
Yes. We work with a forge source that can replicate non-standard pin diameters and strap lengths, and we machine pins in-house for most sizes. If the original pin is 7/16-inch or 5/8-inch, we don’t tell you to replace the whole gate. We make the part. Get a free estimate at (877) 610-2993.
Yes. We size the operator to the gate’s true weight and cycle rate, not just its width. For heavy ornamental iron, that often means a Viking or DoorKing swing operator with proper mounting plates welded to the gate frame. We run the power, set the travel limits, and tune it so it starts and stops smoothly. Free estimate in writing before we start.
Usually, yes. We square the frame, reinforce the hinge side, and make sure the post is set deep enough to resist wind load and clay movement. If the gate’s span is too long for its frame weight, we may recommend a mid-rail brace or a heavier hinge post. The goal is a gate that stays put through the next storm season.
When you need a gate fixed right in Guthrie, call (877) 610-2993. We’ll give you a free estimate, a straight answer, and work that’s done the way it should have been the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Guthrie and central Oklahoma since 2001.