Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Greenwich
Gate access control in Greenwich, CT typically costs $850-$2,400 for a complete keypad or card reader upgrade on an existing gate, and most back-country jobs are quoted on site within 48 hours. Whether you’re on Round Hill Road with a 14-foot iron gate on 1930s granite pillars or closer to town in 06830, the real question is whether the system will hold up to salt air, freeze-thaw cycles, and stonework that hasn’t moved in ninety years. We’ve been answering that question since 2001, and Hal Gatewood still puts his name on every invoice. Call (877) 610-2993 and you’ll get a live person, not a voicemail tree.
Why Gatewood Fence & Gate Is Greenwich’s Preferred Gate Access Control Company
Greenwich homeowners don’t hire a gate company the way they hire a landscaper. They hire someone they’ll see again at the hardware store in Cos Cob or the diner in Old Greenwich. That’s how Hal built this business: owner-operated since 2001, with a published address and a license number anyone can look up. The name on the shop is the name on the truck.
Around here, gate access work is rarely a simple swap. Most back-country entrances in 06831 were automated twenty or thirty years ago, which means we’re integrating new keypads, phone entry, and video intercoms with operators that are already older than some of the tech we’re installing. A national outfit will tell you to replace the whole system. We’ll show you what’s actually failing and fix that first. The 90-Day Done Right Promise is in writing on every job: if it’s not right, one call brings Hal back, no runaround.
We answer the phone 24/7. Not a dispatch queue. Not a call center. When your gate keypad stops working on a Sunday morning and your driveway is a quarter mile long, you want a person who knows Greenwich. That’s us. Gate Access Control is what we do every day, but the local knowledge is what makes it work.
Our Gate Access Control Services in Greenwich
Keypad Entry
A keypad on a Greenwich gate has to do more than read digits. It has to survive coastal salt air in Riverside and Old Greenwich, where contacts corrode faster than manufacturers expect. We install weather-sealed keypads rated for marine environments, and we mount them so the wiring doesn’t invite moisture. A typical Greenwich keypad replacement runs $350-$850, including the new unit and labor. Keypads tied to existing FAAC or Linear receivers are straightforward; retrofits onto 1990s hardware take a little more planning.
Remote Control
Long driveways and stone walls are the two biggest enemies of radio remotes in Greenwich. On back-country estates, the distance from the house to the gate often exceeds the range of a standard receiver, and thick granite pillars absorb signal. We test signal strength at the actual distance, then install extended-range receivers or relay antennas where needed. Expect $300-$700 for a receiver upgrade with new remotes, more if we’re boosting signal across a property with dead zones.
Phone Entry
Phone entry systems at Greenwich gates let you open the gate from a call, an app, or a landline inside the house. The catch on rural acreage is that a cellular gateway needs signal at the gate post, not just at the house. We’ve installed phone entry on properties along Stanwich Road where the gate is far enough from the house that Wi-Fi never reaches it. A cellular phone entry system in Greenwich typically runs $900-$1,800 installed. The work includes the gateway module, wiring to the operator, and testing from your phone before we leave.
Card Reader
Card readers are the quiet workhorse on estates with staff, deliveries, and multiple vehicles. A proximity card reader wired to your existing operator costs about $450-$950 installed in Greenwich, depending on whether it’s a standalone unit or integrated with a phone entry and video intercom. For clients in 06831 with historic stone pillars, we surface-mount the reader on a custom bracket rather than core-drilling into granite. You don’t want a hole in stone that’s been there since the 1930s.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenwich
We’re certified to service nine major gate brands, and the ones we see most often across Greenwich are FAAC, Linear, Viking, and BFT. FAAC underground operators from the 1990s are still running on plenty of Round Hill Road estates, and parts for those units are getting harder to find. We stock what we can locally for Greenwich customers and source European components when a retrofit makes more sense than a full replacement. If you’ve got a Viking intercom, a Linear board, a BFT motor, or a FAAC underground unit, we service it. On site. In your driveway. Hal welds in the driveway so the gate doesn’t leave the property.
Common Gate Access Control Problems We See in Greenwich Homes
- Radio dead zones on long back-country driveways. When the gate is 300 feet from the house and stone pillars are in the signal path, remotes drop out. The fix is usually an extended-range receiver, not a new remote.
- Freeze-thaw cycle misalignment. Connecticut gets 25-35 freeze-thaw cycles a year, enough to heave post footings and shift swing gates. A gate that’s even slightly out of alignment trips the safety sensors and the access control won’t work reliably until the sag is corrected.
- Salt-air corrosion in Riverside and Old Greenwich. Keypad contacts and card reader housings on coastal lots in 06830 corrode faster than inland. Intermittent entry failures on older LiftMaster or FAAC systems are usually corrosion, not a bad board.
- Dead zones for smart access on rural acreage. Wi-Fi rarely reaches a gate at the bottom of a long driveway. Phone entry and smart access need cellular gateways or hardwired ethernet, not a Wi-Fi extender that dies in the first wet winter.
Pricing for Gate Access Control in Greenwich, CT
Here’s what you can expect to pay in Greenwich, and these are real numbers, not a phone estimate that changes at the door:
| Service | Typical Greenwich Range |
|---|---|
| Keypad entry replacement or new install | $350 - $850 |
| Remote receiver upgrade with new remotes | $300 - $700 |
| Cellular phone entry system | $900 - $1,800 |
| Proximity card reader (standalone) | $450 - $950 |
| Video intercom with phone entry | $1,400 - $2,800 |
| Smart access integration with existing operator | $600 - $1,400 |
Every job is quoted in writing before any work starts. The price we agree on is the price you pay. That’s not a footnote, it’s the way we’ve done business since 2001. Estimates are free, there’s no trip charge inside Fairfield County, and we’ll give you a free second opinion on any written estimate from another company. Seniors and veterans get 10% off, permanently. Call (877) 610-2993 and we’ll come out, look at your gate, and hand you a number.
Greenwich’s Back-Country Gate Challenge
Greenwich’s back-country, concentrated in 06831 along corridors like Round Hill Road, Stanwich Road, and Lake Avenue, has one of the densest populations of gated private estates in the Northeast. These aren’t suburban driveway gates. They’re wide ornamental iron swing gates, often spanning 10-14 feet, hung from original 1920s-1940s granite or fieldstone pillars. Installing modern access control here is a different trade than installing it on a vinyl fence panel in a development. You’re retrofitting keypads, card readers, and intercoms onto century-old masonry without disturbing the stone, and you’re doing it while the gate itself may need welding rather than replacement.
On a Round Hill Road estate, we had to install a phone entry and video intercom system on a 14-foot ornamental iron swing gate hung from original 1930s granite pillars. The client wanted smartphone app control without damaging the stonework, so our crew surface-mounted a Viking intercom with custom-fabricated stainless brackets and routed low-voltage wiring through a discreet chase along the hinge post, leaving the masonry untouched. That’s the kind of job that separates a gate specialist from a general contractor. You can’t drill into granite that’s been standing for ninety years and call it a clean install.
Many of these estates still run 1990s-era hydraulic or underground articulated-arm operators, brands like HySecurity or original FAAC underground units, installed when the properties were first automated. Parts availability is shrinking every year. A Greenwich technician has to source European components or engineer retrofits onto the original stone pillar mounts. That’s the dual-skill demand that sets Gatewood Fence & Gate apart: we weld on site, we service the old operators, and we integrate new access control without touching historic masonry. Serving Greenwich means knowing how to do all three at once.
We Also Serve Cities Near Greenwich
Our crews serve Greenwich and the surrounding towns, including Cos Cob, Riverside, Old Greenwich, and Stamford. If your gate is just over the town line, the same local expertise still applies. The back-country estates don’t stop at the border, and neither do we. Call (877) 610-2993 for gate access control anywhere in Greenwich or the immediate area.
Serving Greenwich, CT - Our Local Coverage Area
We’re based in the Greenwich area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Greenwich
Yes. We surface-mount intercoms and card readers on stainless brackets, routing low-voltage wiring through discrete chases along the hinge post or the existing gate frame, so the granite is never drilled. This is standard practice for us on back-country estates in 06831. Call (877) 610-2993 and we’ll assess your pillars in person.
Freeze-thaw cycles in Greenwich heave the ground around post footings, shifting gate alignment enough to trip safety sensors, which then prevents the keypad from opening the gate. The keypad usually isn’t the problem; the gate alignment is. Call (877) 610-2993 for a diagnosis, and we’ll tell you honestly whether it’s the footing, the sensors, or the keypad.
We install cellular phone entry gateways with their own SIM service or hardwired ethernet from the house to the gate, not Wi-Fi extenders. Cellular modules work anywhere you have signal at the post, and we test from your phone before we leave. Call (877) 610-2993 for a site assessment.
Yes. We work with the original FAAC control boards and install relay interfaces that let modern keypads, card readers, and phone entry trigger the existing operator without replacing it. Parts for these units are getting harder to source, but we carry what we can and retrofit the rest. Call (877) 610-2993 with your model number and we’ll confirm compatibility.
Yes. Gate operators require entrapment protection per UL 325, including photocell sensors and reverse-sensing. We test all existing safety devices as part of every access control upgrade in Greenwich, and if a sensor is compromised we’ll flag it before it fails. Call (877) 610-2993 to schedule the work.
Call Gatewood Fence & Gate for Gate Access Control in Greenwich
If your keypad is intermittent, your remote won’t reach the gate, or you want phone entry on a back-country entrance that hasn’t been touched in decades, call (877) 610-2993. A live person answers, day or night. Hal will come out, look at your gate, and give you a written quote before any work starts. Free estimates, no trip charge inside Fairfield County, and the 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Greenwich since 2001.