Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Eastchester
Gate access control in Eastchester means keypads, remote controls, phone entry, card readers, video intercoms, and smart access retrofitted to homes where many gates were hung before modern safety requirements existed. Most of the systems we service in 10709 sit on 1940s-to-1960s properties with original concrete post footings, which behave differently than anything built in the last 20 years. That matters when a control board fails or a keypad goes dead. Call (877) 610-2993 and you’ll get Hal or someone who works directly with him, not a voicemail queue.
Key Takeaways
- Most access control failures on older Eastchester gates trace back to post movement, not the electronics.
- Frost heave in Westchester’s freeze-thaw winters shifts 60-year-old concrete footings enough to overload operators.
- We repair first, replace only when the old part genuinely can’t do the job. On-site welding keeps your gate in your driveway.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, we make it right.
- Upfront pricing agreed before work starts. Free estimates. Call (877) 610-2993.
Why Gatewood Fence & Gate Is Eastchester’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001 and still answers the phone. That’s not marketing language. The name is on the shop, the address is published, and the license number is there for anyone to look up. When an Eastchester homeowner calls about a keypad that stopped responding or a swing gate that grinds against its stop, the person who shows up is the kind who gets annoyed by sloppy work he finds from previous repairs.
We know Eastchester’s housing stock. Colonials, split-levels, and Tudor-influenced homes from the 1940s through the 1960s dominate the town. Many still have their original wrought iron gates. Many still have the concrete footings poured when the gate first went in. We know what those footings do after 60 years of Westchester frost, and we know how that affects the access system wired to the gate.
Dispatch and scheduling are coordinated from our New York City office, but crews serve Eastchester locally. Response time to most Eastchester neighborhoods is measured in hours, not days. A live person answers around the clock. That’s been true since day one.
Serving Eastchester and the surrounding area, our Gate Access Control work starts with an honest look at what’s failing. Sometimes it’s the board. Sometimes it’s the post. Fix the board without the post and you’ll fix it twice.
Our Gate Access Control Services in Eastchester
Keypad Entry
Keypads on Eastchester gates fail for predictable reasons. Moisture gets into the housing. Road salt from winter storms eats at exposed low-voltage wiring where the keypad line meets the operator. And on older systems, the keypad controller was never designed to talk to anything built after about 1995. A keypad that works intermittently after a snowstorm usually means corroded wiring at the gate base, not a bad keypad. We trace the line, repair or replace the damaged run, and seal the housing properly. Keypad entry in Eastchester typically runs $350 to $800 installed, depending on whether we’re swapping an existing unit or running new wire.
Remote Control
Remote control issues on Eastchester gates split into two camps. The gate stopped responding to the remote entirely, or the range dropped so far you have to be standing on the sidewalk to get it to open. The second one is far more common on older properties. Aging receiver boards lose sensitivity, and antenna placement on retrofitted gates is often poor. A $40 remote from the hardware store won’t fix a receiver that’s 20 years old. Remote receiver replacement or reprogramming in Eastchester runs $180 to $450.
Phone Entry
Phone entry systems let you buzz open the gate from your cell or from a landline inside. On Eastchester homes with original gates, phone entry is often added years after the initial install, tapped into an operator that predates modern intercom standards. We install and service phone entry modules that work with existing gate operators, including legacy boards from brands like FAAC and LiftMaster where the phone module needs to sit between the telco line and the operator’s open-command input. Phone entry addition in Eastchester typically runs $550 to $1,200 depending on the existing operator and whether new cabling is needed.
Card Reader
Card readers make sense for Eastchester properties with multiple regular users: family members, household staff, or contractors. A proximity card reader at the driveway approach lets authorized people tap and enter without a remote or a phone call. On older Eastchester gates, card readers almost always require a standalone access controller because the original gate operator wasn’t built to accept reader input. We handle the controller, the reader, the power supply, and the wiring, all integrated so the gate’s existing safety loops still work. Card reader systems in Eastchester run $800 to $1,600 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eastchester
We’re certified to service nine major gate brands, and on Eastchester jobs we most often see FAAC, LiftMaster, DoorKing, and Elite equipment. Older Viking and Ghost Controls operators show up too, particularly on retrofit jobs from the late 1990s and early 2000s. Because we carry parts for these systems on the truck, most Eastchester access control repairs are completed on the first visit. No waiting a week for a board to arrive. When a legacy control board can’t support the features you want, like smart access or video intercom integration, we’ll tell you plainly rather than selling you a retrofit that half-works.
Common Gate Access Control Problems We See in Eastchester Homes
- Frost heave tilts posts and kills operators. Eastchester gets 30 to 40 freeze-thaw cycles each winter. Concrete footings from the 1950s and 60s shift a half-inch or so over decades. That half-inch changes the gate’s swing arc, which makes the operator work against resistance it wasn’t designed for. The motor burns out. Homeowners blame the motor. The real fix starts with re-plumbing the post.
- Road salt corrodes wiring and hardware. Eastchester streets get salted all winter. That salt works into iron hinges, latch hardware, and the low-voltage wiring that powers keypads and safety sensors. Corrosion causes intermittent failures that are maddening to diagnose if you don’t know where to look.
- Legacy control boards can’t handle modern access features. A 1980s FAAC or LiftMaster board won’t support a video intercom or smart access app. Sometimes you can add an external controller. Sometimes the board is too far gone and replacement is the cheaper answer long-term. We’ll tell you which one applies to your gate.
- Gates hung before safety requirements existed. Many Eastchester swing gates predate modern photocell and obstruction-sensing standards. Village code now requires safety photocells on automatic gates in many cases. Older gates often need new sensor wiring and alignment before they’ll pass inspection or operate safely.
Pricing for Gate Access Control in Eastchester, NY
Here’s what you can expect to pay in Eastchester for common access control work. Keypad replacement or new install: $350 to $800. Remote receiver service: $180 to $450. Phone entry addition: $550 to $1,200. Card reader system: $800 to $1,600. Video intercom retrofit: $1,200 to $2,800 depending on whether the existing gate operator can accept the video signal or needs an interface module. Smart access integration: $400 to $900 for the controller and mobile gateway, plus labor. Every price is quoted and agreed before any work starts. You’ll never get a call from the driveway saying the estimate changed. Estimates are free. Seniors and veterans get 10% off permanently.
We Also Serve Cities Near Eastchester
Gatewood Fence & Gate covers all of Eastchester and the surrounding communities, including Tuckahoe, Wykagyl, Bronxville, and Scarsdale. If you’re in any of these areas, we’re close and we’re familiar with the homes. Our Gate Access Control in Eastchester work extends to these neighboring villages with the same response time and the same written guarantee.
Serving Eastchester, NY - Our Local Coverage Area
We’re based in the Eastchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Eastchester
Because the motor was never the problem. On 1940s-1960s Eastchester homes, concrete gate post footings shift from 30 to 40 freeze-thaw cycles every winter. Even a half-inch of movement changes the swing arc and loads the operator. New motor, same misaligned post, same burnout. We re-plumb and re-anchor the post first, then the motor lasts. Call (877) 610-2993 and we’ll check the post before selling you another motor.
Usually yes, with the right interface. Older FAAC or LiftMaster control boards don’t natively speak video intercom protocol. We install a standalone video intercom unit and an interface module that connects to the existing operator’s trigger input. You keep the gate, you add the video. If the board is too far gone to accept even a dry-contact trigger, we’ll tell you that and give you a straight price for a board replacement. Video intercom retrofit in Eastchester runs $1,200 to $2,800.
In most cases, yes. Eastchester’s village code applies current safety standards to gates that operate across pedestrian zones, and many Eastchester gates sit just feet from public sidewalks. That makes photocell and obstruction sensing requirements stricter than in more rural parts of the county. If your older gate lacks working safety sensors, we’ll install and align them as part of the repair. Code compliance is part of doing the job right, not an upsell.
Road salt and moisture. When snow melts, salted water runs into the keypad housing or into the low-voltage wiring junction at the gate base. Older Eastchester gates often have wiring that was never sealed to modern standards. The salt corrodes the connection, and the keypad goes dead or intermittent. We find the corroded section, replace that run, and seal the housing so it survives the next storm. Keypad repair in Eastchester runs $250 to $500 when the wiring is the culprit.
Almost always cheaper to rebuild. Original Eastchester wrought iron from the 1940s and 50s is thicker and better-made than most modern aluminum panels. The failure is usually the post, the hinge, or the footing, not the iron itself. On-site welding lets us rebuild the hinge post, re-anchor the footing, and re-hang the gate without hauling your gate to a shop. A full rebuild typically runs $600 to $1,400. A replacement gate and install often runs $3,000 and up, and you’ve traded original iron for extruded aluminum. We’ll give you both numbers and let you decide. Call (877) 610-2993 for a free second opinion on any written estimate.
Call Gatewood Fence & Gate for Access Control in Eastchester
If your gate’s keypad is dead, your remote won’t reach the receiver, or you want to add smart access to a gate that’s been there since the Eisenhower administration, call (877) 610-2993. You’ll speak with a live person. We’ll schedule a time with a real arrival window, and the person who shows up will know Eastchester gates the way a local should. Free estimates. Upfront pricing. 90-Day Done Right Promise written on every job. The name is on the shop, and the shop is accountable to every customer in town.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eastchester since 2001.