Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Commerce
A gate that won’t open in Commerce isn’t a minor annoyance. It’s a dock door that stops loading, a truck that can’t get out, and a yard that closes early. Most gate repair work in Commerce is heavy-duty commercial slide gate repair on industrial properties, not the residential driveway gates you see in Bell or Maywood. A typical commercial gate repair in Commerce runs $290-$680, and we can usually have a crew on site the same day you call.
We’ve been fixing gates in Commerce long enough to know that the Bandini Boulevard corridor runs different from the residential streets. The air is thick with particulate from food processing plants and manufacturing. The gates run hundreds of cycles a day under semi-truck and forklift traffic. And when one seizes mid-cycle, it’s not a curb appeal issue. It’s a load that isn’t moving. Call (877) 610-2993 and a live person answers. That’s the whole point.
Why Gatewood Fence & Gate Is Commerce’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and the name on every invoice is the same name on the building. We’re not a call center and we don’t send faceless crews. When a gate fails at a Commerce warehouse off the I-5 corridor, the person who shows up has been welding and wrenching on commercial operators for years. Our Gate Repair crew welds on site, which matters when the gate is a 40-foot cantilever slide unit that can’t be hauled anywhere.
Commerce customers call us because the work here is different. A gate operator that would last a decade at a house in East Los Angeles may need major service within 18 months at a Commerce distribution center. We know that before we arrive. We stock rollers, pinion gears, limit switches, and photocells that fit the high-cycle commercial units running day and night off Eastern Avenue and Slauson. And every job carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings Hal back. No runaround, no dispatch queue, no voicemail at 2 a.m.
We answer the phone 24 hours a day, 7 days a week. Not because we staff a call center three states away, but because a gate that fails at 4 a.m. at a food distribution facility on Bandini can’t wait until 9 a.m. You call. A person answers. That person can tell you what’s likely wrong and when we’ll be there.
Our Gate Repair Services in Commerce
Electric Gate Repair
Electric gate repair in Commerce typically means a commercial operator that has stopped answering the loop detector or a motor that’s burned out from the grease and particulate that settle on every surface near the manufacturing corridor. We service nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We troubleshoot the full circuit: loop detector, safety photocells, limit switches, and the operator board. Then we fix what’s actually broken, not what’s easy to bill.
Automatic Gate Repair
Automatic gates at Commerce warehouses run hundreds of cycles daily under semi-truck and forklift traffic. That’s a wear pattern almost absent in neighboring residential cities like Bell or Maywood. The bottom rollers wear oval, the track welds crack, and the limit switch loses calibration. We carry the parts that fail on high-cycle commercial operators and we replace them on site. Your gate stays in your yard, not on a flatbed headed to a shop.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. In Commerce, swing gates are less common than slide gates, but they show up at older manufacturing yards and employee entrances. When the post leans or the hinge welds crack, we cut out the bad steel and weld in new. Not a patch plate that will fail again in six months. A proper repair that holds.
Gate Realignment
Slide gate realignment is about the track, the rollers, and the rack and pinion. When airborne grease from nearby food processing plants cakes the rack teeth, the gate starts binding, then the operator burns out trying to push it. Our crew pulled a 40-foot cantilever slide gate off its rails at a distribution center off Bandini after the lift motor seized mid-cycle. We degreased the rack, replaced the pinion gear and both bottom rollers, and rewired the safety photocell. The dock was loading again before the next truck arrived. That’s what realignment means in Commerce: making the gate move true again under real traffic, not just nudging it back onto the v-track.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Commerce
We stock parts for the brands that show up most in Commerce’s industrial yards. Linear, Viking, Ghost Controls, and DoorKing operators are common on the v-track and cantilever slide gates off the I-5 and rail corridors. We’re certified to service all nine major brands, and we keep rollers, pinion gears, limit switches, and safety photocells on the truck so most repairs finish in one trip. If the part isn’t on the truck, we know which local supply houses in Commerce carry it, and we’ll have it same day.
Common Gate Repair Problems We See in Commerce Homes
- Bottom rollers and track welds failing within 18 months: The semi-truck and forklift traffic at Commerce warehouses cycles gates hundreds of times daily. That chews through rollers and cracks track welds fast, leaving the gate jammed against the v-track.
- Airborne grease fouling limit switches and motor housings: The dense industrial corridor in and around Commerce generates elevated particulate matter and airborne grease from nearby manufacturing. It settles into motor housings and roller bearings, causing intermittent stoppages at night when no one is on site.
- Loop detectors knocked out of calibration: Constant forklift crossings at truck aprons confuse the loop detector, so the gate no longer holds open long enough for a semi to clear the sensor field. The gate closes early or won’t open at all.
- Restricted working space: Many Commerce properties are tight, with shared driveways and rights of way. A swing gate that would fit at a house in Cudahy won’t clear the setback at a Commerce loading yard. Slide gate conversion is often the right fix, and we do it on site.
Pricing for Gate Repair in Commerce, CA
What you’ll pay depends on what failed and how much of it has to come apart. Here’s what Commerce customers typically see:
- Limit switch or safety photocell replacement: $140-$260
- Bottom roller replacement on a slide gate: $190-$320
- Rack and pinion gear replacement: $280-$520
- Operator motor replacement: $420-$780
- Full gate realignment with welding: $350-$680
- Swing to slide gate conversion: $1,800-$4,200 depending on gate width and operator
Every price is quoted and agreed before any work starts. You get the number up front, in writing, and that’s the number you pay. We offer $40 off any repair over $200, no trip charge anywhere in Commerce, and a free second opinion on any written estimate you’ve received from another company. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Commerce
Our Gate Repair in Commerce service covers the whole city, zip code 90101. We also work regularly in the surrounding cities, including Maywood, Cudahy, Bell Gardens, and East Los Angeles. If your property sits on the edge of Commerce or your business has multiple locations in the area, one call covers all of it.
Serving Commerce, CA - Our Local Coverage Area
We’re based in the Commerce area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Commerce
Commerce’s gates run hundreds of cycles per day under semi-truck and forklift traffic, which means a gate operator that would last ten years at a house in East Los Angeles may need major service within 18 months here. The bottom rollers wear oval, the track welds crack, and the limit switches drift out of calibration. It’s not a defect. It’s just what happens when a gate does more work in a month than a residential gate does in a year. Call (877) 610-2993 and we’ll tell you what’s worn and what it costs to fix.
Yes. Most slide gate repairs at Commerce distribution centers take two to four hours, and we can usually work around your loading schedule. We coordinate with the dock supervisor to work in windows between trucks. If the gate can’t be down during business hours, we’ll come after hours. The goal is to get you moving again without shutting down your yard. Call us for a time window that works for your operation.
Yes. Entrapment protection, which includes safety photocells and reversing edges, is the part of the system that keeps a gate from closing on a person or a forklift. UL 325 requires it on all commercial gate operators, and we test and repair it on every job. If your photocells are out of alignment or the reversing edge is worn through, we replace them. That’s not an upsell. It’s the part that keeps people alive.
Yes. Commerce properties are often tight, with shared driveways and rights of way where a swing gate won’t clear the setback. We convert swing gates to slide gates on site, which means welding new track brackets, mounting the v-track or cantilever rollers, and installing the slide operator. The cost runs $1,800-$4,200 depending on gate width and operator. Call (877) 610-2993 for a free measure and a written price.
You clean more often and you use sealed components where you can. The airborne grease from Commerce’s food-processing and manufacturing plants settles into motor housings, roller bearings, and track channels. We recommend more frequent cleaning and lubrication intervals than you’d use in a residential city, and we spec sealed bearing rollers and protected limit switch housings on high-cycle commercial gates. It costs a little more up front and saves a lot of downtime later. Call us and we’ll assess what your gate is fighting.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been fixing gates since 2001 and still welds on site in Commerce himself. If your gate is down, call (877) 610-2993 and Hal will answer.