Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLiftMaster Gate Repair in Fort Worth, CA | Gatewood Fence & Gate
Gate Repair in Fort Worth starts with understanding one thing most out-of-town companies miss: this city sits on Blackland Prairie clay that shifts every season, and your operator feels it first. We’re Gatewood Fence & Gate, an independent LiftMaster service provider – not factory-authorized, which means we answer to you, not a corporate rep. Hal Gatewood has been fixing gates here since 2001, and he’ll tell you straight what’s wrong before touching a wrench. Call (877) 610-2993 and you’ll get Hal or one of his crew, not a phone tree.
Why Fort Worth Residents Choose Us for LiftMaster Service
We work on LiftMaster operators every single day across Fort Worth – from the vintage 1990s SlideDriver units still hanging on in Fairmount to newer SmartVideo models in the subdivisions west of downtown. Hal grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College before spending two decades in the field, which means he’s sorted out every kind of mess a previous installer can leave behind. The name is on the shop, and the shop is down the road – that is the oldest accountability there is.
We carry genuine LiftMaster OEM boards and gear kits on the truck because we know what Fort Worth’s freeze-thaw cycles and summer heat do to these machines. When a capacitor burns out in an LA500 during a 105-degree August afternoon, you don’t want to wait two weeks for a part. You want it fixed that day. We stock what this city’s operators actually need. Every job comes with our 90-Day Done Right Promise in writing, and we quote the price before any work starts. That’s not a sales pitch – it’s how Hal has run this shop since day one.
Common LiftMaster Gate Repair Problems We Solve in Fort Worth
- Gear-driven motors seized after ice storms. Winter Storm Uri in February 2021 coated Fort Worth gates in heavy freezing rain that snapped hinges and locked up older SL3000 series slide operators. We open those gearboxes, clean out the corrosion, and replace the stripped gears with OEM kits. If the windings are burned from running against a frozen rack, we’ll tell you repair versus replace honestly – under five years old with clean windings, we fix it.
- Capacitor burnout in LA400 and LA500 swing arms. When the clay contracts in July and August, posts tilt just enough that the motor works harder every cycle. That extra load cooks capacitors. We swap in proven aftermarket capacitors when OEM lead times would leave your gate dead for a week, and we check the post plumb at the same time – because replacing the capacitor without fixing the post means you’ll buy another capacitor next summer.
- Limit-switch drift from post heave. A gate leaf that over-travels on uneven Blackland Prairie soil is almost always a post that’s moved, not a switch that’s gone bad. We re-plumb the post, then recalibrate the limits so the gate closes without strain. Fix the panel without the post and you’ll fix it twice.
- Control board failures from lightning and power surges. North Texas thunderstorms roll through fast and hard, and residential DC LiftMaster boards take the hit. We keep common boards on hand for same-day replacement, and we’ll check your surge protection while we’re there – because a board that fries once will fry again if the surge path isn’t addressed.
- Worn hinges and pivots on ornamental iron gates. Fort Worth’s older neighborhoods – Fairmount, Ryan Place, Crestline – are full of iron driveway gates that have been swinging for 50 years. The hinges wear oval, the gate sags, and the LiftMaster strains against the bind. We weld on site, re-burnish pivot pins, and true up the geometry before touching the operator. A gate sags in the hinge post, not in the middle – and that is where we start.
LiftMaster Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth sits directly on the Blackland Prairie’s shrink-swell clay, and that fact drives nearly every LiftMaster repair call we run. In the established estate neighborhoods west of downtown – Crestline, Monticello, and Berkeley Place in 76107 – large ornamental iron driveway gates installed 40 to 50 years ago now face a triple threat: posts tilted by decades of seasonal clay heave, bare iron corroded by Tarrant County’s moderately hard water leaving mineral scale on pivot points, and welds that were never maintained. We see LA500 swing operators on these gates tripping thermal overloads because the post has moved two inches out of plumb, not because the motor is weak. That means a real repair here starts with drilling new piers below the clay line and re-plumbing the post before we touch a single wire on the operator. A company that only does Fort Worth Gate Installation without understanding the soilll swap the motor, hand you an invoice, and be back in nine months when the same failure recurs. We fix it so it stays fixed – that’s the 90-Day Done Right Promise, and honestly, most of our work outlasts that by years.
LiftMaster Models & Products We Service in Fort Worth
We service the full range of LiftMaster gate equipment running in Fort Worth today. That includes the LA500 swing gate operator – the most common unit on residential iron gates in this city – the SL585 and CSL24V DC slide gate operators you’ll find on HOA-standardized equipment in 76108 and beyond, and the CAPXL belt-driven opener on newer custom homes. Our parts stance is plain: we use genuine LiftMaster OEM boards and gear kits because they’re built to the original spec, but we’ll reach for a proven aftermarket capacitor or limit switch when the OEM part is backordered and your gate is stuck open. For sales and service on any LiftMaster product in the area, see our full LiftMaster sales & service page. We stock common boards, capacitors, and gear kits locally so Fort Worth turnaround is measured in hours, not shipping days.
LiftMaster Service Pricing in Fort Worth
LiftMaster gate repair in Fort Worth typically runs $180 to $340 for most operator failures – capacitor swaps, limit recalibration, and board replacements fall in that range. Full gearbox rebuilds on slide operators run higher, usually $400 to $700 depending on the model and how much freeze-thaw damage we’re undoing. Post re-plumbing and weld remediation add cost when the clay has moved your post, but that’s the part that makes the repair last. Here’s the straight answer on what drives the price:
- Service call and diagnosis: No trip charge inside the county, and estimates are free.
- Capacitor or limit switch replacement: $180-$260 including the part.
- Control board replacement: $280-$500 depending on the board version.
- Gearbox rebuild (slide operators): $400-$700 with OEM gear kits.
- Post re-plumb and hinge re-weld: Quoted on site after we see the post condition.
We quote the full price before any work begins, and that number doesn’t change at the door. Senior and veteran discounts take 10% off. $40 off any repair over $200. Call (877) 610-2993 for an exact quote – estimates are free.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - LiftMaster Gate Repair in Fort Worth
Spring rain swells the Blackland Prairie clay under your gate posts, tilting them just enough that the operator has to push harder every cycle. The motor isn’t failing – it’s fighting a post that moved. We re-plumb the post, replace any worn hinge bearings, and recalibrate the limits so the gate closes without strain. Call (877) 610-2993 and we’ll come look.
Yes. We open the gear housing, clean out corrosion from the freezing rain, and replace whatever the ice destroyed – usually gear teeth and sometimes the capacitor if the motor stalled against a frozen hinge. If the windings are burned, we’ll quote you repair versus replace straight. Most iced-over LA500s under five years old are worth repairing. Call (877) 610-2993 for a free estimate.
The limit switch is usually just reporting what the post already did. On Fort Worth’s clay, the post heaves and the gate over-travels, which makes the switch read wrong. We re-plumb the post and recalibrate the limits – replacing the switch without fixing the post means you’ll chase the same symptom every wet spring. Call (877) 610-2993 and we’ll sort it properly.
Annually is realistic for most gates in 76107 and 76108, especially ornamental iron gates on original footings. Some years the movement is minor and you can skip it; after a wet spring like 2021, plan on it. We offer realignment as a standalone service, and we’ll tell you if your posts need deeper piers to break the cycle. Call (877) 610-2993 for a free assessment.
We repair them when the motor windings are clean and the unit is under five years old – a new capacitor and a post re-plumb usually sorts it. If the gearbox is stripped from repeated freeze-thaw cycles or the board is water-damaged, we recommend replacement and we’ll quote you a new unit honestly. Our rule is simple: don’t replace what a $20 part will fix. Call (877) 610-2993 for an exact quote – estimates are free.
Service Areas Near Fort Worth
We run calls across Tarrant County and beyond. Most of our LiftMaster work centers on Fort Worth proper, but we regularly serve Fort Worth service area neighbors in the metroplex, and we’ve got crews covering LiftMaster service in Plano and LiftMaster service in Frisco for customers east and north of the city. If you’re on the Fort Worth side of the metroplex, you’re in our backyard.
Book Your LiftMaster Service in Fort Worth Today
Call (877) 610-2993 and you’ll reach a live person – Hal or someone on his crew – any hour, any day. We’ll get a tech to your Fort Worth gate fast, quote the price before work starts, and stand behind the repair with the 90-Day Done Right Promise in writing. Call me directly. If I don’t pick up, I’ll call you back – not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.