Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Spokane, CA | Gatewood Fence & Gate
Our Spokane Gate Repair team fixes Ghost Controls gate openers and hardware across Spokane’s 99205, 99206, 99207, and 99208 ZIP codes as an independent service provider. The work we do here is different from Ghost Controls work anywhere else: basalt bedrock sits close to the surface across much of this city, and that rock, combined with Spokane’s freeze-thaw winters, is why Ghost Controls gates keep sagging, dragging, and burning out motors. Call (877) 610-2993 and we’ll show up, diagnose it on the spot, and tell you what it costs before we touch a wrench.
We’ve been working gates and fences since 2001, and Ghost Controls is one of the nine brands we service. Hal Gatewood owns the shop, his name is on the invoice, and the Ghost Controls sales & service work we do gets backed by our 90-Day Done Right Promise. If it’s not right, we come back and make it right. No runaround.
Why Spokane Residents Choose Us for Ghost Controls Service
Ghost Controls makes a solid opener, but the installation and the ground under it decide how long it lasts. In Spokane, that ground fights back every winter. When your gate starts grinding, reversing early, or not moving at all, you want someone who knows both the electronics and the frame. We do both, and we fix the gate in your driveway, not in some shop across town.
Hal has been at this since 2001. He came up through Los Angeles Trade-Technical College, then spent years in the field learning the stuff classrooms skip. The thing he is best at is sorting out messes left behind by other installers, and Spokane has plenty of those. We also answer the phone with a live person 24/7. That is not a sales line; it is how the shop runs. And our Spokane service area coverage means we know the difference between a South Hill basalt post and a North Side sandy loam post before we even get out of the truck.
Common Ghost Controls Gate Repair Problems We Solve in Spokane
These are the failures we see most often, and they are all tied to how Spokane treats a gate:
- Stripped plastic drive gears in Raptor II and Classic openers. When a post heaves in the freeze-thaw cycle, the gate drags at the hinge plate. The motor cycles against that resistance every single time, and plastic gears are what give. In South Hill homes especially, we see this constantly because basalt-driven post heave is so common there.
- Corroded or moisture-failed control boards on GCR linear openers. Snow melts into the conduit fittings around the motor, and water wicks right onto the board. Next thing you know the gate stutters, stops mid-travel, or goes completely dead. 99205 and 99206 North Side properties with older above-ground conduit get this every year.
- Broken or mis-set limit cams after freeze-thaw frame racking. The gate moves a quarter inch out of plane over winter and the limit cam bracket bends. The gate then slams into the stop or reverses two feet short of closed. We had a Browne’s Addition Craftsman last March doing exactly that.
- Premature battery failure in backup units. AGM batteries mounted below grade or inside uninsulated metal pedestals do not like Spokane’s sub-zero winters. They lose capacity fast, and the first winter power outage becomes an open-gate emergency.
- Gate sag from hinge plate failure on original wood posts. Many Spokane homes still have 40- and 50-year-old wood gate posts that have rotted at grade. The gate sags, the Ghost Controls motor works harder, and the whole system ages in dog years.
Ghost Controls Service in Spokane: What Local Conditions Mean for Your Equipment
Here is the fact that matters: on Spokane’s South Hill, from the Perry District up through Lincoln Heights, over 80% of residential gate post replacements hit basalt within 18 inches of the surface. We core-drill for every Ghost Controls post-mounted operator in those neighborhoods because we know from experience what happens if you do not: the auger bounces off the rock, the installer sets the post too shallow, spring comes, the ground thaws unevenly, and the gate drops. That drop shears hinge pins and overloads the opener until something fails. No neighboring city in eastern Washington has the same combination of shallow bedrock and deep frost heave. Spokane does, and we plan for it on every Ghost Controls job we take here. If a low-ball bid did not include a core-drilling line item, you will probably be calling us for a second opinion before the gate gets hung.
Last March we got called to a 1920 Craftsman in Browne’s Addition with a Ghost Controls Raptor II on a pedestrian swing gate. The gate had begun reversing two feet short of close every afternoon. Our tech found the left post had heaved 1.5 inches over winter, just enough to throw the gate out of plane and bend the limit-cam bracket. We core-drilled the basalt at 14 inches, set a longer steel post with a concrete collar, re-hung the gate, installed a new Raptor II limit cam assembly and an OEM gear set, and the gate closed full-travel the same day. That is what doing it once looks like.
Ghost Controls Models & Products We Service in Spokane
We service the full line of Ghost Controls equipment, including Raptor II (AX2) swing gate openers, GCR Series linear slide gate openers, Classic (AX1) swing openers, and LSM1 / GTR remote and receiver modules. We use Ghost Controls OEM gears, boards, and remote receivers whenever they are available because drop-in fit beats modification. But we also keep high-cycle aftermarket gears and industrial-grade limit switches on hand for older models where OEM parts are backordered or priced beyond reason. That means faster turnaround for Spokane customers who just want their gate working again. If a Ghost Controls operator is over 12 years old and the gate frame needs more than $800 in post and hinge work, we will usually recommend a new Raptor II kit paired with a properly anchored post. Pouring parts into a compromised frame is how people get burned twice.
Ghost Controls Service Pricing in Spokane
Ghost Controls gate repair in Spokane typically runs $180-$340 for common fixes like limit cam replacement, gear swaps, or control board troubleshooting. Post and hinge work costs more because bedrock and frost heave keep the job honest. A full Gate Installation in Spokane for a Raptor II opener usually lands between $1,100-$1,600 depending on gate weight, post condition, and whether we need to core-drill. A new GCR slide opener runs $1,300-$1,900 installed. Your price is quoted and agreed before any work starts, and the estimate is free. Call (877) 610-2993 and we will walk the gate with you.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Spokane
We see two causes for that pattern in South Hill Spokane homes: either a limit cam got knocked out of adjustment when the gate frame racked during freeze-thaw, or the gate has sagged at the hinge plate and the opener is hitting its safety reverse because of increased drag. We start by checking the post, then the cams. Call (877) 610-2993 and we will sort it without replacing parts that do not need replacing.
If the gate frame is sound and the post is not heaving, we replace the gear and the gate runs for years. If the post has moved or the gate drags at the hinges, a new gear will strip again within a season or two, and you have bought the same problem twice. We will tell you honestly which situation you are in, and the estimate is free.
Yes. We add Ghost Controls remote and keypad modules to existing swing and slide gates all over the North Side, including 99205 and 99208. The gate frame has to be square and the hinges in good shape first, because automation will not fix a sagging gate. We check the gate before we add the opener, and we quote a fixed price before starting.
Snow and ice load on the gate itself is the usual culprit, and if the track is not cleared the cantilever slide mechanism binds. Sometimes snow-melt intrusion around conduit fittings has also corroded the control board connections. Either way, this is a Spokane winter problem, not a ghost in the machine. Call (877) 610-2993 and we will inspect it, clear what needs clearing, and fix the real fault.
We schedule same-day Ghost Controls repairs across the South Hill whenever the calendar allows, and we answer the phone live 24/7 so you can find out right now rather than leaving a message. Call (877) 610-2993 and tell us what the gate is doing. We will tell you when we can have someone there.
Service Areas Near Spokane
We serve the full Spokane area, including the North Side, East Side, South Hill, and Browne’s Addition neighborhoods. Homeowners outside the immediate city who need Ghost Controls work often reach us from as far as the Inland Northwest region. If you are comparing service this thorough in other markets, take a look at our Ghost Controls service in Charleston or Ghost Controls service in Phoenix pages. The geography changes, but the way we work stays the same: show up, diagnose, quote a price, do it right the first time.
Book Your Ghost Controls Service in Spokane Today
Call (877) 610-2993 and a live person picks up. If we can get to your Spokane gate same day, we will. The estimate is free, the price is agreed before work starts, and every job carries our 90-Day Done Right Promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Spokane since 2001.