Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Repair in Ponte Vedra Beach, CA | Gatewood Fence & Gate
We fix Ghost Controls gate operators across Ponte Vedra Beach, from Sawgrass Players Club to Marsh Landing to The Plantation, and we do it as an independent shop, not a manufacturer affiliate. The thing that sets our Ghost Controls work apart here is simple: we know what the Atlantic salt air does to these specific boards, hinges, and limit switches, because we’re the ones crawling under gates in Ponte Vedra Beach every week. Call (877) 610-2993 and you’ll get a live person, day or night, who can actually talk about your Ghost Controls model by name.
Our crew has torn down hundreds of Ghost Controls AXP and DTP1 operators in Ponte Vedra Beach’s gated communities. We’ve seen what the barrier-island salt does to a control board that would last another decade ten miles inland in Jacksonville Ghost Controls service territory. When your gate starts reversing mid-travel or your remote only works from eight feet away, we don’t guess. We’ve seen that exact failure on that exact model in your exact neighborhood, and we fix it the first time.
Why Ponte Vedra Beach Residents Choose Us for Ghost Controls Service
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and he grew up in the San Fernando Valley, not far from Hansen Dam. He picked up his fundamentals at Los Angeles Trade-Technical College, then spent years in the field learning what no classroom teaches, like why a gate that swings fine in February starts dragging every August when the ground shifts. These days, Hal’s crew spends more time sorting out sloppy work from previous installers than anything else: stripped hinges, wrong-gauge hardware, motors wired so badly they trip the breaker every other week.
For Ghost Controls owners in Ponte Vedra Beach, that matters. We’re part of the broader Ghost Controls sales & service network Gatewood runs across Florida, and we carry OEM-compatible parts on the truck for the most common coastal failures. We don’t haul your operator off to a shop two counties away. We fix it in your driveway, weld it in place if the bracket’s gone bad, and stand behind the work with a 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround.
Common Ghost Controls Gate Repair Problems We Solve in Ponte Vedra Beach
These are the five failures we see most often in Ponte Vedra Beach, and each one is tied to something specific about this stretch of Florida coast:
- Salt-corroded control board terminals. Salt-laden Atlantic air works into Ghost Controls control board terminals and wire connections, causing intermittent start failures and phantom obstructions. The gate says something’s in the way when nothing is. We clean and reseal terminals, and replace boards when corrosion has eaten past the point of repair.
- Rust-jacked hinge plates on AXP and DTP1 operators. Constant humidity and salt spray warps Ghost Controls hinge plates at the mounting points. The gate sags, the motor works harder than it should, and eventually overloads. We replace the hinge plates and often fabricate galvanized brackets right on site, so the steel fits the existing post instead of the other way around.
- Sand intrusion in the gearbox and limit switches. Barrier-island soil is basically sand, and fine sand works its way into Ghost Controls AXP motor housings. Limit switches fail prematurely, gears bind, and the gate stops mid-cycle. We open the housing, clean out the sand, and replace worn switches and gears before they seize completely.
- Storm-season power surge damage. Ponte Vedra Beach sits in hurricane territory, and the brownouts and surges that come with storm season stress Ghost Controls low-voltage transformers. The AC adapter burns out, the main fuse blows, and the gate goes dead. We install surge protection where it makes sense and replace the transformer with the right spec.
- Remote range collapsing in salt air. This is the one people assume is a remote battery problem. It usually isn’t. The receiver antenna on the Ghost Controls control board corrodes in the coastal humidity, and range drops from fifty feet to eight. We replace or resolder the antenna connection and get you back to opening the gate from the street.
Ghost Controls Service in Ponte Vedra Beach: What Local Conditions Mean for Your Equipment
Here’s what most generic gate companies won’t tell you about Ponte Vedra Beach: this place has one of the highest concentrations of gated communities per square mile in Northeast Florida, and almost all of them were built in a narrow window between 1985 and 1998, during the TPC Sawgrass development boom. That means the Ghost Controls operators installed in Sawgrass Players Club, Marsh Landing, and The Plantation are all hitting end-of-life at roughly the same time, which is why Gate Installation in Ponte Vedra Beach has become a growing need. HOA boards across the area aren’t dealing with one failed operator. They’re looking at ten or twenty, all aging out together.
For a Ghost Controls owner in Ponte Vedra Beach, that creates a specific problem: the parts and service demand in this town spikes in waves, and HOAs with multi-unit contracts get priority from most shops. We’ve built our Ghost Controls parts stock around that reality. We carry the boards, actuators, brackets, and sensors that fail most often in these coastal communities, so an individual homeowner doesn’t get told to wait three weeks while an HOA account eats up the supply. That’s the difference between a shop that treats Ponte Vedra Beach as a stop on a route and a shop that treats it as the reason we stock what we stock.
Ghost Controls Models & Products We Service in Ponte Vedra Beach
We service the full Ghost Controls lineup that shows up in Ponte Vedra Beach gated communities, including the AXP Series single and dual swing openers, the TSS1 and TSS2 swing gate openers, the DTP1 dual swing kit, and the DS1 sliding gate opener. Parts policy is straightforward: we use genuine Ghost Controls OEM parts when they’re available and priced honestly. When the OEM part is backordered or the factory price is double what a quality aftermarket equivalent costs, we tell you and recommend the aftermarket option. We repair what’s truly repairable, a failed board, a worn gear, a bent arm assembly. But we’ll also be honest when salt corrosion or gear wear has compromised the whole operator, because replacing a worn-out Ghost Controls unit is sometimes the reliable fix, not the upsell.
Ghost Controls Service Pricing in Ponte Vedra Beach
Ponte Vedra Beach Gate Repair for Ghost Controls typically runs $180 to $340 for common fixes like board replacement, limit switch swaps, and hinge plate work. Full operator replacements on double swing gates usually land between $1,200 and $2,500 depending on the model and how much of the existing wiring and posts are worth keeping. What drives the cost in this area is parts availability and how deep the salt corrosion has gotten. The price is quoted up front, agreed to before any work starts, and we don’t change it at the door. Estimates are free, and there’s no trip charge inside the county. Call (877) 610-2993 and we’ll tell you what we think it’ll cost before we ever back the truck up.
Serving Ponte Vedra Beach, FL - Our Local Coverage Area
We’re based in the Ponte Vedra Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Ponte Vedra Beach
Why do our Ghost Controls gate motors fail so much faster in Ponte Vedra Beach than in Jacksonville? Direct Atlantic salt exposure corrodes Ghost Controls control boards, terminals, and hinge hardware far faster than the same equipment just ten to fifteen miles inland in Jacksonville. Ponte Vedra Beach’s barrier-island air carries salt and fine sand into every exposed connection, and the humidity keeps it wet year-round. A Ghost Controls operator that might run fifteen years inland can start failing in eight here. Regular terminal cleaning and resealing helps, and we can set that up during a routine service call. Call (877) 610-2993 for an inspection.
Can you service a Ghost Controls operator inside an HOA community with long wait times for board approval? Yes. We work with HOA boards and property management companies in Ponte Vedra Beach’s gated communities all the time, including The Plantation, Marsh Landing, and Sawgrass Players Club. The key is presenting the problem and the fixed price clearly so the board can approve quickly. We write the estimate the same way we’d write it for your kitchen table: plain English, real numbers, no sales pitch. Call (877) 610-2993 and we’ll get the process moving.
What is the most common Ghost Controls failure on a double swing gate in a salt-air environment like Ponte Vedra Beach? Rust-jacking at the hinge plates. Salt and humidity corrode the steel hinge hardware on Ghost Controls DTP1 and TSS2 dual swing gates, and the rust physically lifts and warps the plates, which throws the gate out of alignment and overloads both motors. We see it constantly in Ponte Vedra Beach, especially on gates that were installed during the 1990s Sawgrass boom. The fix is new hinge plates, often with galvanized brackets we fabricate on site. Call (877) 610-2993 for a free estimate.
Do you install battery backup systems on Ghost Controls gates for hurricane season in Ponte Vedra Beach? Yes, we do. Storm-season outages and power surges are a real threat in Ponte Vedra Beach, and a battery backup keeps your Ghost Controls gate operating when the power drops. We install compatible backup systems, wire them properly, and test the auto-switchover before we leave. It’s a straightforward add-on that matters here in a way it doesn’t inland. Call (877) 610-2993 and we’ll quote it straight.
My Ghost Controls remote only works when I’m very close to the gate. What causes that in Ponte Vedra Beach? In most Ponte Vedra Beach cases, the receiver antenna connection on the Ghost Controls control board has corroded from salt air exposure. The remote itself is usually fine. The fix is resoldering or replacing the antenna connection on the board. This is a quick repair, and it’s one we see more often here than anywhere else on Florida’s east coast. Call (877) 610-2993 and we’ll check it before you buy a new remote.
Service Areas Near Ponte Vedra Beach
In addition to Ponte Vedra Beach, our crew handles Ghost Controls service up and down the coast and inland. We’re regularly in Ponte Vedra Beach service area communities like Palm Valley, Nocatee, Jacksonville Beach, Atlantic Beach, and Sawgrass. If you’re just south of us in Ghost Controls service in Jacksonville Beach or further down in Ghost Controls service in Bonita Springs, the same crew approach and the same pricing applies.
Book Your Ghost Controls Service in Ponte Vedra Beach Today
If your Ghost Controls gate is acting up, call (877) 610-2993. A live person answers, day or night. We’ll schedule a time that works, show up when we say we will, and give you a written price before any work starts. Free estimates, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Ponte Vedra Beach since 2001.





Before
After
Before
After
Before
After