Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Norwood
A new gate installation in Norwood typically runs $2,800 to $9,500 depending on the gate type, material, and whether you’re adding an automated opener. Most residential driveway gates in Norwood take 3 to 5 days from measure to completion, and we quote the full price in writing before anything gets built. We’re the local gate crew that shows up when we say we will, and we answer the phone at (877) 610-2993 around the clock.
We know Norwood’s streets because we work them every week. From the capes and colonials near the Town Common to the warehouses along University Avenue, we’ve set posts, hung gates, and wired operators all over 02062. When you call, you get a real person who knows the difference between a gate that needs new hinges and one that needs new footings.
Why Gatewood Fence & Gate Is Norwood’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is on every invoice. That means when something isn’t right, you know exactly who to call. Norwood homeowners keep our number because we repair before we replace, weld on site, and put the 90-Day Done Right Promise in writing on every job. If the gate doesn’t work the way it should within 90 days, one phone call brings us back.
Our crew works Norwood daily, so a call from the Washington Street area or a side street off Nahatan Street gets answered by someone who knows those roads. We don’t bounce you to a call center. The person who picks up can tell you when someone will be at your house, and then that person shows up. Background-checked, uniformed, and driving a truck with the shop name on the side.
We’ve been doing Gate Installation long enough to know that Norwood’s older homes need more than a stock gate bolted to a leaning post. A gate sags in the hinge post, not in the middle, and that’s where we start. That’s why our customers come back when they add a pedestrian gate or upgrade to an automatic opener.
Our Gate Installation Services in Norwood
Driveway Gate
Driveway gates in Norwood’s 1950s and 1960s neighborhoods almost always need new post footings before the gate goes on. The original concrete rarely goes below Massachusetts’ 48-inch frost depth, which means posts heave and gates bind by March. We dig deeper, pour proper footings, and set the posts so the gate swings true through Norwood’s freeze-thaw cycles.
Pedestrian Gate
Pedestrian gates near the Town Common often involve matching an older iron picket style or adding a matching gate beside a new driveway gate. We fabricate and weld on site, so the latch lines up and the hinges carry the load. Whether it’s a simple walk gate on a raised ranch or a decorative picket gate on a Victorian, we size the hardware to the gate, not the other way around.
Sliding Gate
Sliding gates are common along University Avenue and at commercial properties in Norwood’s light-industrial corridor. Road salt tracked in from Route 1A is hard on bottom rollers and ground tracks. We install sliding gates with sealed bearing rollers and galvanized track, and we set the operator so it doesn’t fight the gate. For a University Avenue warehouse, a new sliding gate means a gate that still rolls clean in February.
Swing Gate
Swing gates work well on Norwood’s wider driveways, but they need hinge posts with serious footings. Norwood’s saturated ground near the Neponset River watershed softens shallow post bases fast. We set swing gate posts below frost depth, use adjustable hinges, and pair the gate with an operator that’s rated for the panel’s wind load and weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norwood
We install and service gates and operators from Viking, DoorKing, and Elite, among others. We keep common parts on the truck so a Norwood job doesn’t stall while somebody waits on a shipment. If you already have an operator in place and want a new gate on it, we’ll match the gate to the existing drive system and tell you honestly whether the operator should be replaced too. We service what we install, and we carry the parts to keep these brands running in Norwood’s climate.
Common Gate Installation Problems We See in Norwood Homes
- Frost-heaved hinge posts. Norwood’s older gates were often set in shallow footings, and after a few winters the posts lift, the gate sags, and the latch misses the strike. The fix starts below ground, not at the hinge.
- Salt-corroded sliding gate track and rollers. Route 1A and University Avenue traffic leave road salt on commercial drives. Bottom rollers seize, tracks rust, and the gate grinds to a stop by spring. Galvanized track and sealed rollers solve it.
- Wind-loaded solid infill gates. Solid metal or wood-filled gates catch Norwood’s breeze and put constant stress on hinge posts and rack-and-pinion drives. We size posts and operators for the panel’s full wind exposure, not just its weight.
- Shallow post concrete on mid-century homes. These 1950s to 1970s capes and split-levels often have post footings 18 to 24 inches deep. Massachusetts requires roughly 48 inches. A new gate on those old posts is a temporary gate.
Pricing for Gate Installation in Norwood, MA
A standard residential walk gate installation in Norwood runs $1,200 to $2,600. Swing driveway gates run $2,800 to $6,500, and sliding gates with automation run $4,500 to $9,500 depending on the panel, operator, and site prep. If we’re replacing an old gate, we often reuse structurally sound posts. If the posts are heaving or set shallow, new footings add $400 to $900 per post. Every price is quoted and agreed in writing before the first hole is dug. Call (877) 610-2993 for a free estimate; seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county. We also offer $40 off any repair over $200 and a free second opinion on any written estimate you’ve already received.
We Also Serve Cities Near Norwood
If you’re in Westwood, Canton, Walpole, or Dedham, we’ll come to you the same way we come to Norwood. The same crews, the same written pricing, the same live phone answer. You’re close enough that the drive is short and the follow-up is fast. But this page is for our Norwood customers, so if you’re a few miles over the town line, call and ask. We’ll be honest about our route.
Serving Norwood, MA - Our Local Coverage Area
We’re based in the Norwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Norwood
Gate post footings in Norwood should go at least 48 inches deep to get below Massachusetts’ frost depth. Most mid-century homes in 02062 have original footings far shallower than that, which is why gates heave and latches misalign by March. When we install a new gate, we drill and pour footings below 48 inches and set the post in one piece so the gate stays put through Norwood’s freeze-thaw cycles. Call (877) 610-2993 if your gate is already heaving; we’ll tell you whether the post can be saved.
Road salt tracked in from Route 1A traffic corrodes the bottom rollers and ground track on sliding gates, especially along University Avenue and Nahatan Street. The salt works into the bearings, the rollers freeze up, and the gate drags or stops moving. We install sliding gates with galvanized track and sealed bearing rollers for Norwood’s commercial properties, and we stock replacement track and rollers for the brands those facilities already run. If your gate seized this winter, call us before the spring rush; we keep commercial accounts on the schedule.
Yes. A battery backup on an automatic gate operator keeps the gate moving when the power drops, and every operator we install has a manual release for exactly that situation. During a power cut, you pull the release and the gate moves by hand. We will show you where the release is before we leave, and we make sure the backup battery is rated for Norwood’s weather. Call (877) 610-2993 and ask about battery-ready operators from Viking, DoorKing, and Elite.
Automatic gates in Norwood must meet the same entrapment protection standards as anywhere in Massachusetts: UL 325 compliance with reversing edges or photocells, and separation of controlling contact sensors. On commercial sliding gates along University Avenue, we add loop detectors and photoelectric sensors as standard. It isn’t a paperwork formality; a gate that closes on a person or a vehicle is a serious injury risk, and we won’t wire an operator without the required safety devices in place and tested. Ask us during your estimate and we’ll show you exactly what’s included.
Usually just post repair. A gate sags in the hinge post, not in the middle, and Norwood’s older iron gates near the Town Common often just need the post reset below frost depth and the hinges rehung. We weld on site, so we can straighten the gate frame and replace the hinge barrels without hauling the gate away. If the post is rotted or split below ground, we’ll tell you honestly, and we’ll give you a number for replacement before we touch anything. Call (877) 610-2993 and we’ll look at it; the estimate is free.
Call Gatewood Fence & Gate for Gate Installation in Norwood, MA
If you need a gate installed in Norwood, call (877) 610-2993. A real person answers, day or night. We’ll schedule a measure, give you a written price, and put the 90-Day Done Right Promise on the job in writing. No call center, no vague estimate, no gate that sags in a year. Hal Gatewood’s name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norwood since 2001.