Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in West Hollywood, FL
Gate repair in West Hollywood usually means one of two jobs: a rusted hinge post on a 1920s Spanish Colonial pedestrian gate in the flats, or a dead operator on a steep hillside driveway north of Sunset where gravity never stops pulling. Most repair calls in the 90069 ZIP code are done same day or next morning, and when a gate fails at 2 a.m., a live person answers at (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and the person who shows up is the person whose name is on the invoice.
Why West Hollywood Homes Are Different
West Hollywood’s housing stock breaks into two distinct gate problems. The flats along Santa Monica Boulevard and Fountain Avenue are dominated by 1920s-1940s Spanish Colonial and Mediterranean bungalow courts whose original wrought-iron pedestrian gates and posts are frequently rusted at ground level from decades of irrigation overspray. The hillside streets north of Sunset, especially the Bird Streets and Sunset Plaza, hold mid-century to contemporary custom homes with automated vehicular gates mounted on steep grades, where improper counterbalancing and gravity stress are the leading causes of failure.
Climate compounds both problems. West Hollywood’s intense UV exposure and prolonged dry heat chew through operator wiring insulation, rubber seals, and painted steel finishes far faster than in Santa Monica or the beach cities. We regularly open control boxes on Fountain Avenue to find wiring insulation cracked and crumbling from years of direct sun, even when the gate looks fine from the street. Then come the autumn Santa Ana wind events. Unsecured or weakly hinged gates get slammed hard, bending frames and stripping gear teeth on slide-gate motors. We see a spike in calls every time the winds kick up, and most of those failures trace back to a hinge post or latch that was already failing.
Gate Repair in West Hollywood
Most gate repairs in West Hollywood fall into two camps: worn-out hardware on older Spanish Colonial pedestrian gates in the flats, and sophisticated automated systems up in the hills where gravity never stops working against the hinges. We fix the gate in your driveway, not in a shop across town. On-site welding means a rusted post gets cut out and replaced where it stands, and a bent frame gets straightened and reinforced without hauling the gate away. Our gate repair work is repair-first: if a part can be fixed, we fix it. If it can’t, we tell you why and show you the failed part before any money changes hands.
We quote the price and agree on it before any work starts. You’ll know exactly what you’re paying before we touch a tool, and that number doesn’t change at the door.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Along Fountain Avenue and Santa Monica Boulevard, decades of irrigation overspray have left original hinge posts rusted through at the base. A gate that still looks fine at eye level can be minutes from falling over. We pour new footings, replace posts with galvanized steel or stainless-anchor assemblies, and re-hang the gate so it latches cleanly. A typical hinge and post repair on a pedestrian gate in West Hollywood runs $250-$550, depending on whether we need to pour a new footing. Fix the panel without the post and you’ll fix it twice.
Electric Gate Repair
An electric gate that won’t respond to the remote, a keypad that resets itself, or a gate that opens halfway and stops are the bread-and-butter calls in West Hollywood. The wiring insulation on exposed gate operators degrades years faster here than in coastal cities because of the dry heat and UV. We test the board, the power supply, the safety photocells, and the wiring before recommending any replacement. Electric gate repair, including troubleshooting and the fix, usually lands between $200 and $600, with the high end reserved for jobs involving a replacement control board or wiring rebuild. On legacy systems with obsolete FAAC or Elite motors, we stock compatible retrofit kits so you don’t pay for a full operator swap when a board is the real problem.
Gate Realignment
Hillside gates bind and creep out of alignment because gravity is always pulling downhill. A gate that creaks and binds halfway through opening on a steep West Hollywood driveway is usually off-level at the hinge post, or the track has shifted with the grade. We re-hang and shim the gate back to level, reset the operator limits, and tighten the hardware so it cycles smoothly. Gate realignment on a standard driveway gate runs $180-$400. Realignment is often the repair that keeps a gate from destroying its own motor.
Why did my gate start sagging even though the panel itself isn’t bent?
The panel is almost never the problem. A gate sags because the hinge post has shifted, rusted, or loosened in its footing. That’s especially common on the original 1920s-era wrought-iron gates along Fountain Avenue and Santa Monica Boulevard, where irrigation overspray has been eating the post base for decades. We fix the post, not the panel. Call (877) 610-2993 for an on-site look and a free estimate.
My 2001 Bird Streets gate uses an old FAAC motor. Can you still fix it?
Yes. We keep legacy FAAC control boards and retrofit kits on hand specifically because so many of the custom automated gates installed in the Bird Streets in the late 90s and early 2000s still run those original motors. The motors themselves are often fine. The control boards fail, the wiring degrades, the gear teeth strip. We fix those, and we only replace the motor when it’s genuinely dead. Call (877) 610-2993 with your motor’s model number.
Gate Installation in West Hollywood
A new driveway gate in West Hollywood typically runs $4,800-$18,500 for a standard automated installation, while custom ornamental steel and hillside-grade work lands between $12,000 and $35,000 depending on the driveway’s slope, gate weight, and access-control integration. We schedule a free measure and written quote within two business days. Our gate installation work starts with the person who builds the gate measuring the gate, so the number on the quote matches the gate that goes in.
Driveway Gate
A driveway gate on a West Hollywood hillside has to handle more than a gate on a flat lot. Gravity works against the hinge post every hour of every day. We set deeper post footings on steeper grades, often 36-42 inches with additional concrete mass, and we size operators for the gate’s actual weight, not the brochure. On Bird Streets properties, we’re used to working around hedges, tight turn radiuses, and streets where the truck has to park at exactly the right angle to offload steel without scratching a retaining wall. A basic single swing gate with one operator runs $4,800-$7,500 for flat lots, but most hillside work starts around $8,000 because the footings are deeper and the operator needs more power.
Pedestrian Gate
Walk gates in West Hollywood’s older courtyard buildings along Santa Monica Boulevard and Fountain Avenue are usually original wrought iron from the 1930s or 1940s. The posts rot at ground level from years of irrigation overspray. When we install a new pedestrian gate here, we don’t just swap the panel. We cut out the corroded post base, set a new galvanized post, and build the gate to match the building’s original ironwork. That matters in a neighborhood where a replacement that looks modern kills the curb appeal of a Spanish Colonial bungalow court.
Sliding Gate
Sliding gates make sense on West Hollywood properties where a swing gate would block the sidewalk or the street. But on an incline, a slide gate needs more than a track bolted to concrete. We see stripped gear teeth on slide-gate motors all the time here, especially after Santa Ana wind events. A gate that catches a 40 mph gust becomes a sail. A double swing gate or a sliding gate on a steep driveway typically lands between $10,000 and $18,500. We install slide gates with heavier gauge track, wind-rated rollers, and operators with enough torque margin that a wind gust won’t strip the gear.
Will a new gate installation on a steep West Hollywood hillside require stronger post footings than a flat-lot gate?
Yes, almost always. On a 10% grade or steeper, we set post footings 36-42 inches deep with additional concrete mass, compared to 24-30 inches on flat lots. The hinge post carries the entire gate weight plus the gravity vector when the gate swings open. Skip the depth and the gate leans within a few years. Call (877) 610-2993 for a free on-site assessment of your driveway grade.
Are automatic gates installed in West Hollywood required to have safety photocells or edge sensors?
Yes. Every automated gate we install in West Hollywood includes a safety photocell across the gate path and, on slide gates, a safety edge that reverses the gate on contact. This isn’t optional equipment we upsell. It’s code, and it’s also how a gate operates safely on a hillside where you can’t always see a child or pet below the driveway line.
Gate Motor & Opener in West Hollywood
When your automatic gate stops opening on a hillside driveway north of Sunset, you need someone who knows these gates and these streets. Gate motor and opener repair in West Hollywood typically runs $180 to $680 depending on the failure, and a live person answers at (877) 610-2993 the first time you call. Our gate motor and opener work covers swing gates in the flats off Fountain Avenue and slide gates on steep Bird Streets driveways, and we diagnose on site before recommending anything.
Gate Motor Repair
Most West Hollywood gate failures we see are motor repair jobs, not replacement jobs. A capacitor burns out, a control board corrodes, a gear strips after a Santa Ana wind event slams the gate against its stop. A gate motor repair in West Hollywood typically runs $180 to $680. We diagnose on site, show you the failed part, and quote the repair before any work happens. The price you hear is the price you pay.
Linear Motor Service
Linear arm operators are common on West Hollywood’s hillside swing gates, where the incline demands precise movement. When a linear motor develops slack or the arm bracket bends, the gate starts oscillating mid-swing and tripping the safety reverse. We set the travel limits, replace worn bushings, and re-square the arm so the gate closes flush against the post instead of bouncing back. Linear motor replacement falls in the $350 to $900 range.
Battery Backup Systems
West Hollywood loses power during fire-season wind events and summer grid strain. A gate motor with a dead backup battery is just a locked door. We install and maintain battery backup systems sized to your motor’s draw, so the gate still opens when the power company can’t deliver. Battery backup installation runs $400 to $1,100 including the battery and enclosure. For solar-powered operators on hillside gates, we check panel output and battery health together, because one without the other is useless.
Why did my LiftMaster gate opener stop working after a Santa Ana wind event in West Hollywood?
Your LiftMaster opener likely lost its gear train or bent a limit switch when the wind slammed the gate against its stop. Santa Ana winds in West Hollywood regularly push unsecured gates hard enough to strip nylon gears and knock the travel limits out of calibration. Call (877) 610-2993 and we’ll diagnose it on site. The estimate is free, and the 90-Day Done Right Promise covers the fix.
Can you still get parts for a 20-year-old FAAC or Elite motor on my Bird Streets gate?
Yes. We keep legacy FAAC control boards, Elite motor components, and compatible retrofit kits in stock specifically for West Hollywood’s hillside gates. Many of those late-90s and early-2000s installations are running obsolete motors, but the gate and track are still solid. We source what’s discontinued and retrofit what can’t be sourced. Call (877) 610-2993 with the model number and we’ll tell you what’s available.
Gate Access Control in West Hollywood
Gate access control repair in West Hollywood usually runs $240-$680 depending on whether we’re fixing a sun-damaged keypad, a corroded circuit board, or a 20-year-old FAAC operator on a Bird Streets driveway. Most jobs are scheduled same-week, and urgent repairs for unsecured gates get priority. Our gate access control work keeps the gate secure and the entry system working, whether it’s a keypad on a courtyard gate or a full video intercom on a hillside estate. If your keypad blinks but the gate won’t move, or your phone entry rings with no audio, call (877) 610-2993. A live person answers, day or night.
Keypad Entry
Keypad failures in West Hollywood follow a pattern: sun-baked membranes crack, salt air corrodes the contact pads underneath, and codes get flaky. On hillside gates with steep driveways, the same UV damage hits the internal wiring seals, so a keypad that worked in June quits in November. A keypad replacement runs $240-$380 installed, depending on whether it’s a surface-mount unit on a courtyard gate or a wired pedestal on a hillside driveway. We replace with weather-rated keypads and re-wrap the harness connections in marine-grade loom, because the standard plastic wrap fails in two summers up here.
Video Intercom
West Hollywood’s hillside gates and courtyard buildings need video intercom systems that hold up to constant sun exposure and the occasional salt-laden breeze off the Pacific. We install and service video intercoms that tie into phone apps, including systems with two-way audio and app-based gate release for properties where the house sits well above the gate. Video intercom installations start around $1,200 for a single-camera system with app integration and run up to $3,500 for multi-tenant setups with panel-mount displays. On Bird Streets properties, we often retrofit video intercom into existing older gate posts, blending the camera into the original wrought iron so it doesn’t ruin the architectural line.
Smart Access
Smart access in West Hollywood often means integrating the gate into an existing smart home setup: Crestron, Control4, or a phone-based system the owner already uses for lighting and climate. Smart access retrofits on existing LiftMaster or DoorKing operators typically run $450-$800, including the relay module and programming. We run MyQ, Alula, and direct-relay integrations, and we test everything with the owner’s actual phone before we leave. A smart gate is only smart if the release actually fires from the app when a delivery driver is at the bottom of the drive at 11 p.m.
Why do keypad entry systems on West Hollywood hillside gates fail sooner than those in the flats?
Hillside keypads in West Hollywood get hammered by direct UV exposure and salt air that flows up through the canyons, both of which break down the keypad’s internal seals and corrode the contact pads years before the same unit would fail on a shaded flatlands property. Add in the constant gravity load on a steep driveway, and the operator works harder, drawing more current through the keypad’s relay. We install weather-rated units with sealed cabinets.
Can you service obsolete FAAC or Elite motors on original Bird Streets gates without replacing the whole operator?
Yes, and we do it regularly. We stock discontinued FAAC and Elite control boards, limit switches, and capacitor kits specifically because so many Bird Streets gates still run those original late-90s operators. If your FAAC motor still turns but the board won’t respond, the repair is often $300-$600 instead of $1,500-$2,800 for a new operator. Call (877) 610-2993 with your model number.
Gate Parts & Welding in West Hollywood
Gate parts and welding in West Hollywood usually means one of three things: a rusted hinge post, a sagging gate that scrapes the driveway, or a 20-year-old motor that nobody stocks parts for anymore. We handle all three, and we do it on site. Our gate parts and welding work keeps the gate in your driveway instead of hauling it off to a shop. If you live in the flats off Fountain Avenue or up in the hills north of Sunset, call (877) 610-2993 and you’ll talk to a person who knows West Hollywood gates.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. On West Hollywood’s 1920s-1940s Spanish Colonial pedestrian gates, the original wrought-iron hinges are usually fine. It’s the post they’re bolted to that’s rotted below the soil line. A typical hinge replacement in West Hollywood runs $95-$220 per hinge, depending on gate weight and whether we need to cut out and rebuild the post base. We replace hinges with stainless hardware rated for constant sun and irrigation overspray.
Post Replacement
Fix the panel without the post and you’ll fix it twice. In West Hollywood’s flats, decades of sprinkler overspray against post bases means we’re constantly digging out rusted stubs and pouring new footings. Post replacement in West Hollywood typically runs $320-$680 for a standard pedestrian gate post, and $700-$1,400 for a heavy driveway gate post that needs a deeper footing. We cut out the old post, set a galvanized steel replacement in concrete, and weld or bolt the gate back true.
Custom Welding
This is the work we actually enjoy. A rusted pedestrian gate off Fountain Avenue with ornamental scrollwork that’s still in good shape doesn’t need to go to the scrapyard. We weld in new bottom rails, rebuild hinge barrels, and patch rust-through on site. On hillside properties north of Sunset, we weld reinforcement into slide gates that gravity has been pulling on for two decades. Custom welding in West Hollywood runs $110-$250 per hour plus materials, and we’ll tell you the exact price before we strike an arc.
Can you weld a repair on a rusted Spanish Colonial pedestrian gate without replacing the whole gate?
Yes, in most cases. We regularly cut out the rotted post base on a 1930s Spanish Colonial pedestrian gate off Fountain Avenue, pour new concrete, and weld a fresh galvanized steel post with stainless hinges so the swing gate no longer sags. The ornamental ironwork above ground is often still solid. Call (877) 610-2993 and we’ll tell you honestly whether welding will save it.
Do you carry parts for obsolete FAAC or Elite motors on Bird Streets properties?
Yes. We source discontinued FAAC and Elite parts through specialty suppliers and we know which compatible retrofits work on older control boards. Many Bird Streets gates were installed in the late-1990s and early-2000s real estate surge and still run on motors that manufacturers stopped supporting years ago. Call (877) 610-2993 with your motor’s model number and we’ll tell you what’s available.
Brands We Service in West Hollywood
We service Viking, Ghost Controls, DoorKing, and Elite operators, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Legacy parts for older FAAC and Elite motors are stocked locally because West Hollywood’s hillside gates still run a lot of them. Most common parts are on the truck. See our brands page for the full list.
Pricing for Gate Repair in West Hollywood, FL
| Service | Typical range in West Hollywood |
|---|---|
| Hinge and post repair (pedestrian gate) | $250-$550 |
| Gate realignment | $180-$400 |
| Electric gate repair | $200-$600 |
| Automatic gate operator swap | $1,200-$2,800 |
| Gate motor repair | $180-$680 |
| Motor installation | $850-$2,400 |
| Battery backup installation | $400-$1,100 |
| Keypad replacement | $240-$380 |
| Video intercom installation | $1,200-$3,500 |
| Hinge replacement (per hinge) | $95-$220 |
| Post replacement (pedestrian gate) | $320-$680 |
| Custom welding | $110-$250 per hour plus materials |
What pushes price up in West Hollywood is hillside grade, access, and gate weight. A steep Bird Streets driveway with tight truck access and a 600-pound ornamental gate is a different job than a flat-lot bungalow court pedestrian gate. Every price is quoted and agreed before any work starts, and that number doesn’t change at the door.
Neighborhoods We Serve in West Hollywood
Gate repair calls come from all over West Hollywood, but these areas see us most often. Response for a repair call is typically same day or next morning, and emergency calls get a live person on the phone around the clock.
- Bird Streets and the hillside streets north of Sunset Boulevard
- Sunset Plaza and the surrounding commercial-residential mix
- Norma Triangle
- The flats along Santa Monica Boulevard and Fountain Avenue
- The Design District and West Hollywood West
Service Area - Cities Near West Hollywood
We work throughout West Hollywood, FL and the surrounding communities. Our crews also serve Hollywood, FL, Andover, FL, West Park, FL, Miramar, FL, and Dania Beach, FL. Dispatch and scheduling are coordinated from the Miami (South FL) office, and crews serve West Hollywood locally.
Serving West Hollywood, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve West Hollywood and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the West Hollywood coverage area; if your address is on it, we can help.
Also serving nearby: West Hollywood, FL, Hollywood, FL, Andover, FL, West Park, FL, Miramar, FL, Dania Beach, FL.
FAQs About Gate Repair in West Hollywood
Most repair calls in West Hollywood are handled same day or next morning. Emergency calls for unsecured gates get priority, and a live person answers the phone 24/7 at (877) 610-2993. Tell us what the gate is doing and we’ll give you a straight answer on when we can be there.
Most repairs don’t require a permit. A full replacement with new footings may, depending on the city’s current requirements for your property type. We can tell you what applies to your specific gate during the free estimate, and we handle the paperwork when a permit is needed.
It covers the work we did. If it’s not done right, we make it right. That promise is stamped in writing on every job, not buried in fine print. One call brings Hal Gatewood back, no runaround. Call (877) 610-2993 for a free estimate on any gate repair in West Hollywood.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Hollywood Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath