Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Los Angeles Homeowners
Gate Access Control in Los Angeles means giving yourself a way to open and close your gate without rolling down a window or getting out of the truck. We install and service keypads, phone entry systems, card readers, video intercoms, and smart access hardware on gates across LA County, from Woodland Hills down to Long Beach. Hal Gatewood has been doing this work since 2001, and his name is on every invoice. When your gate won’t open at the keypad or the phone entry stops ringing inside the house, call (877) 610-2993 and a live person answers, day or night.
What Our Gate Access Control Service Includes
Each access control system does a different job, and half of the time the fix is simpler than people think. The other half, it’s a grounding problem or a wire a previous installer left loose in the conduit. We work on all of it, on site, without hauling your gate to a shop. Here’s what we cover and how we handle each piece.
Keypad Entry
A keypad at the gate lets you punch in a four-digit code and drive through without a remote on your visor. You need it when family members, landscapers, or delivery people are coming and going and you don’t have spare clickers to hand out. We install new keypads, replace worn buttons that have lost their numbers, and rewire older units where the code pad works but the gate motor never gets the signal. Most keypad jobs in Los Angeles, CA take under two hours start to finish.
Remote Control
Remotes die, get lost, or stop pairing because the receiver board inside the operator has failed. We program new transmitters to your existing motor, replace the receiver when it’s the problem, and match multi-button remotes so one clicker runs your driveway gate and the pedestrian gate too. We stock OEM remotes and receivers for Gatewood’s regular brands, and we test the signal range from the street so you aren’t sitting at the property line clicking three times before the gate moves.
Phone Entry
A phone entry system calls your cell phone or a landline inside the house when someone presses the call button at the gate. It’s the system you want when you can’t see the gate from the kitchen window and you don’t want to walk outside every time a visitor shows up. We install hardwired phone entry panels, replace corroded call buttons, and configure the system so the right number rings and the right key code opens the gate from your phone. We also fix the older DoorKing telephone entry boxes that a lot of hillside homes in Echo Park and across Los Angeles still run.
Card Reader
Card readers work best for courtyard gates, small home-equipment yards, or anywhere you want to issue and revoke access without changing a code. You hold a fob or a card near the reader and the gate opens. We install standalone readers and readers tied into an existing operator, and we set up the master cards so you can add and delete users yourself without a service call. If a reader is powering on but not reading, we test the reader with a known-good fob before touching the wiring, so you don’t pay for parts you don’t need.
Video Intercom
A video intercom puts a camera next to your call button so you see who’s at the gate on a screen inside or on your phone before you let them in. Silver Lake homeowners and others across Los Angeles with long driveways or limited sight lines lean on these systems heavily. We install video intercom kits, wire them into your existing gate operator’s open-command input, and aim the camera so the visitor’s face is lit and centered, not blown out by the afternoon sun. Hal has replaced enough badly aimed cameras to know the difference between a working system and one you’ll actually use.
Smart Access
Smart access means running your gate from a phone app, giving temporary codes to a delivery driver, or getting an alert every time the gate opens. It’s convenient, but it still depends on the same relay, power supply, and wiring as any other access system, and that’s where we start. We install and configure smart controllers from the brands we service and make sure the app talks to the motor reliably. If the gate works from the app but not from the keypad, we trace it back to the connection point without replacing components that are still good.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We work on Viking, Ghost Controls, DoorKing, and Elite access control equipment regularly, and we keep OEM parts and replacement boards for all four on the truck and at the shop. Viking makes solid telephone entry systems, and we’ve pulled enough of them apart to know where the lightning-damage clues hide. Ghost Controls builds a lot of the newer smart hardware going onto residential gates in Koreatown and across Los Angeles right now, and we’re certified to program and troubleshoot their openers and app interfaces.
DoorKing telephone entry and access control is the brand we see most often on older LA hillside properties, and those units need careful board-level repair rather than wholesale replacement. Elite makes dependable slide and swing gate operators with integrated access inputs, and we’re set up to bench-test their control boards to find a failed relay before replacing the whole board. Whether you have one of these four or any other make, we can likely service it, and if we can’t, we’ll tell you that on the phone before you spend a dime.
Signs You Need Gate Access Control Right Now
- The keypad accepts the code but the gate won’t move. This usually points to a relay inside the operator, a broken wire at the hinge post, or a control board that isn’t sending the open command. It’s not something that fixes itself, and every time you run the gate manually, the track and motor take extra wear.
- Your phone entry rings but you can’t hear the visitor. Water intrusion into the call box, a failing speaker, or a bad phone line connection causes this. If you’re pressing the open button on your phone and the gate ignores it, the outbound DTMF tones aren’t reaching the control board.
- The gate opens on its own, closes partially, or reverses for no reason. A phantom open signal usually means a short in the loop detector wiring or a failing accessory input on the operator. It’s the access system that’s sending the signal, but the problem can damage the motor if it keeps cycling all day and night.
- Remotes work close up but not from the street. The antenna, the receiver sensitivity, or the wiring between the receiver and the motor has degraded. Los Angeles hillside homes with long driveways feel this first because you’re asking the remote to reach further than it would on a flat lot.
- You’re handing out codes or keys to people you shouldn’t have to. If the roster of people with access keeps growing and you can’t shut any one person off, that’s an access control problem, not a personnel problem. A proper card reader or phone entry system gives you a way to grant and revoke access in ten seconds.
Our Gate Access Control Process - Step by Step
- 1
Call and talk to a live person. When you call (877) 610-2993, a real person picks up, 24/7. You describe the symptoms, we ask what equipment you have, and we tell you honestly whether it sounds like a quick fix or a service call worth scheduling.
- 2
We show up in the window we promised. Hal or one of his crew arrives with the truck loaded for access control work, not a blank van and a clipboard. We carry multimeters, tone generators, common replacement boards, and OEM remotes for the brands we service, so we can usually fix the problem on the first visit.
- 3
We test, measure, and isolate before swapping parts. The job starts at the power supply and the low-voltage wiring, because loose connections and failed transformers cause more access control failures than the equipment does. We test the output at the power supply, check for voltage drop at the keypad or reader, and confirm the open-command relay is actually closing. That keeps you from paying for a new control board when the problem was a corroded wire nut.
- 4
We make the repair or installation on site and walk you through it. We weld, wire, program remotes, configure codes, and set up phone and app access right there in your driveway. Before we leave, we test the system through several cycles, show you how to change codes and add users, and answer questions until you’re comfortable with it.
- 5
You get the 90-Day Done Right Promise in writing. Every job leaves with the promise in writing: if it’s not done right, we make it right. One call brings Hal back. That applies to our parts and our labor, no fine print and no runaround.
How Much Does Gate Access Control Cost in Los Angeles?
Gate access control pricing in Los Angeles depends on what you’re starting with and what you’re adding, but here are the ranges we see most often. A basic keypad replacement or repair runs $180-$350, including the part and the labor. A new phone entry system install starts around $600 and can reach $1,100 depending on the panel and whether we’re running new wire from the gate to the house. Card reader installations typically run $450-$900 for a single reader and fobs, while a video intercom starts near $700 and goes up with camera quality and integration. Smart access setups most commonly fall between $350 and $800 when the existing operator and wiring are in good shape.
What moves the price is wire condition, distance from the gate to the house, the operator’s age, and whether any previous work left the low-voltage system in bad shape. Some Los Angeles hillside properties need a trench run for a phone or intercom line, and that’s the honest cost driver. You avoid overpaying by getting the diagnosis before the part swap, which is how we work from the start. Your estimate is quoted and agreed before any work begins, and the number we give you is the number on the invoice. Call (877) 610-2993 for a free estimate, and senior and veteran customers take 10% off permanently.
Gate Access Control Near Los Angeles - Our Service Area
We work on gates and access control systems throughout Los Angeles County and into the surrounding areas, including Long Beach, Santa Clarita, Palmdale, and Riverside. The shop is local, the truck is local, and the person holding the wrench lives here. If you’re in Woodland Hills or Santa Ana, we can get to your gate quickly, and we also serve our neighbors up north with Gate Access Control in Sacramento and Gate Access Control in San Francisco. For everything else, start at the home page.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Los Angeles
Gate access control is any system that lets you open and close your gate from a keypad, a remote, your phone, a card reader, or an intercom, without manually pushing or pulling the gate. It includes the control boards, relays, power supplies, and wiring inside the operator canopy as well as the devices mounted at the entry point. In Los Angeles, most homeowners use a combination of keypad and remote, with phone entry or video intercom added on longer driveways.
A straightforward keypad or remote programming job usually takes under two hours. A phone entry or video intercom installation can take half a day, and a full access control system with new wiring and multiple entry devices may run a full day or longer. We’ll give you a straight time estimate when we give you the price, before any work starts. Call (877) 610-2993 and we’ll tell you what to expect for your specific setup.
Most residential access control work in Los Angeles falls between $180 and $1,100 depending on the equipment and the wiring involved. Keypad repair and replacement sits at the lower end, while phone entry and video intercom installs run higher. We quote the exact price before any work begins, so the number you approve is the number you pay. For a free estimate on your gate, call (877) 610-2993.
Yes, we service DoorKing, Viking, Ghost Controls, and Elite access control equipment, along with most other major gate operator and access brands. We stock OEM parts for the brands we work on most, which means fewer return trips and faster fixes. If you aren’t sure what brand is in your gate, we’ll identify it on the call or on the first visit.
We answer the phone with a live person 24 hours a day, 7 days a week, and we handle emergency access control failures when they come up. If your gate won’t open and you’re locked out or can’t get a vehicle in or out in Los Angeles, call (877) 610-2993 for Emergency Gate Access Control in Los Angeles, CA and we’ll get someone headed your way. No voicemail tree and no call center.
Every access control repair and installation carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right, one call brings Hal back, no runaround and no fine print. That applies to the parts we install and the labor we perform. If a relay we replaced fails in ninety days, we come back and sort it out.
Clear access to the gate and the operator, make sure there’s a working ground-level power outlet nearby if possible, and gather any remotes, codes, or key fobs you currently use. If you know the brand and model of your gate motor, have that handy when you call. We bring everything else, and we’ll tell you if there’s anything specific we need for your system. Call (877) 610-2993 anytime.
Schedule Your Gate Access Control Service in Los Angeles Today
If your keypad is dead, your phone entry quit ringing, or you want to add smart access to the gate, call (877) 610-2993 now. You’ll speak with a live person, get a straight answer, and schedule a free estimate on your terms. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Angeles since 2001.