Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Irving, CA | Gatewood Fence & Gate
We provide independent Ghost Controls gate repair across Irving, from Valley Ranch courtyard gates to Las Colinas commercial entries, and we also offer Dallas Ghost Controls service for properties just east of the city line. The one thing that makes our Ghost Controls work here different: we know which opener failures cluster in which Irving neighborhoods, because we’ve been pulling boards and chasing fault codes on this brand since the first AxDP retrofits went in around 2005. If your Ghost Controls opener is acting up, call (877) 610-2993 and talk to Hal Gatewood directly. We’re not manufacturer-affiliated or authorized. We’re just the local shop that fixes Ghost Controls properly.
Why Irving Residents Choose Us for Ghost Controls Service
Hal Gatewood has been working gates and fences around Los Angeles since 2001, and he learned early that a gate that swung fine in February starts dragging every August when the ground shifts. That lesson applies double in Irving, where Blackland Prairie clay does the shifting on a schedule all its own. We work on Ghost Controls openers every day here, enough to know the exact failure points and the board-level diagnostics that rarely show up in the manual. When you call, a live person answers, not a voicemail. Hal’s name is on the shop and on every invoice, and he’ll tell you plainly whether a repair makes sense or a replacement does. That’s the whole promise: honest work, done in your driveway, backed by our 90-Day Done Right Promise in writing. We also offer Ghost Controls sales & service for anyone weighing repair against new equipment.
Common Ghost Controls Gate Repair Problems We Solve in Irving
- AxDP control boards blowing relays after an ice storm. When a February-style freeze hits Irving, HOA gates get cycled repeatedly while iced shut. The AxDP board’s control relay takes the brunt of that, and we see a wave of blown relays across Valley Ranch and Las Colinas every time. We keep genuine Ghost Controls boards on the truck for same-day swaps.
- XPBS battery trays corroding on Blackland clay lots. Irving’s expansive clay shifts posts and lets moisture wick up the motor mount. That moisture sits in the XPBS battery tray and eats it. If you’re in 75037 or 75063, check yours before the rainy stretch.
- R20 remote signal dropping near Las Colinas access panels. The 318 MHz band gets crowded when a commercial entry stacks card readers, intercom transmitters, and Ghost Controls remotes in one spot. We diagnose interference and re-pair R20 remotes so the signal holds.
- TSS1 torque limiter clicking into manual bypass. When posts heave out of plumb on the clay, the arm binds. The TSS1’s torque limiter gives up and clicks into bypass, which looks like a dead opener but is usually a post problem. We realign the post and reset the limiter.
- Limit switches shearing off their mounts. Post shift doesn’t just trip the torque limiter. It can snap a limit switch clean off its mount inside the opener housing. We’ve seen it on Bent Tree Drive and fixed it same day.
Ghost Controls Service in Irving: What Local Conditions Mean for Your Equipment
Valley Ranch was platted in the early 1980s, and the first wave of Ghost Controls AxDP openers went in as retrofits around 2005 to 2010. Those boards are now aging out in clusters, so one HOA board failure usually leads to three neighbors calling the same week. That’s not a generic gate problem. It’s a Valley Ranch timing problem, and it means we keep more AxDP boards and limit switches staged for Irving than most shops keep for an entire county. The same clay that pushes posts out of plumb in west Irving’s older neighborhoods, the 75060 and 75061 housing stock, also stresses swing arms and battery mounts on Ghost Controls XPBS units. If your gate worked fine last spring and drags now, the post moved, not the motor. We start with the post.
Ghost Controls Models & Products We Service in Irving
We work on the Ghost Controls product lines Irving actually runs: the AxDP dual-swing board, the XPBS single-arm battery and solar opener, the TSS1 torque-limited swing arm, and the R20 remote line that pairs with all of them. We keep genuine Ghost Controls boards and limit switches on the truck for same-day swaps, but we’re honest when a gear kit from a quality aftermarket manufacturer will outlast the original on a 35-year-old Valley Ranch gate. We say so before pricing the repair. That’s the difference between a parts-swapper and someone who actually wants your gate running five years from now.
Ghost Controls Service Pricing in Irving
Ghost Controls repair in Irving typically runs from $180 to $340 for common board and limit switch work, with XPBS battery tray replacements landing around $160 to $240 depending on corrosion. Torque limiter resets and post realignment start at $200 and go up if the post needs a full reset. Full AxDP board replacement runs $275 to $450 with genuine parts. Every estimate is free and the price is quoted and agreed before any work starts in your driveway. We also offer $40 off any repair over $200 and no trip charge inside the county. Call (877) 610-2993 for an exact quote, and Hal will tell you what it costs before anyone turns a wrench.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Irving
Ice storms cause HOA gates to cycle repeatedly while iced shut, and that surge load blows the AxDP control relay, which then takes the fuse with it. We replace the relay and board if needed, then verify the gate’s force settings so the next freeze doesn’t do the same. Call (877) 610-2993 and we’ll pull the fault codes before you order parts you don’t need.
Every 18 to 24 months in Irving. The clay expands and contracts through our wet and dry cycles, shifting the motor mount and letting moisture reach the battery tray faster than in stable soil. We check the tray for corrosion whenever we’re on site for a related repair.
Yes. We interface Ghost Controls swing openers with existing Doorking, Linear, and LiftMaster access control panels on commercial and HOA entries. If your Las Colinas property already runs a DKS 1833-style system, we can wire the Ghost Controls opener into it without ripping out the panel. Call (877) 610-2993 and ask for Hal.
AxDP board failures on Valley Ranch and Las Colinas gates that were retrofitted in the 2005 to 2010 window. Those boards are aging out together, and we’ve done enough of them to stock the parts locally. If your board is dead, we can usually have it swapped same day.
Because the post has heaved out of plumb and the arm is binding enough to trip the torque limiter. The gate looks fine because the arm is no longer driving it. We reset the post, realign the arm, and reset the limiter so it stays engaged. Call (877) 610-2993 for an exact quote; estimates are free.
Service Areas Near Irving
Beyond Irving, we cover the surrounding North Texas communities with the same Ghost Controls expertise, including Grand Prairie, Coppell, Farmers Branch, Euless, and Grapevine. If you’re in one of those cities and running a Ghost Controls opener, call us before you replace it. For our full coverage area, see the Irving service area page. We also serve Ghost Controls service in New Haven and Ghost Controls service in Hartford for clients with properties in those regions.
Book Your Ghost Controls Service in Irving Today
Call (877) 610-2993 now and you’ll get Hal or someone on his crew, not a voicemail. We’ll schedule your Ghost Controls repair or Gate Installation in Irving, show up when we say we will, and quote the price before any work starts. If it’s not done right, our 90-Day Done Right Promise brings us back, no runaround. Call me directly. If I don’t pick up, I’ll call you back - not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving since 2001.