Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterMighty Mule Gate Repair in Fort Worth, CA | Gatewood Fence & Gate
We’re Gatewood Fence & Gate, and our Fort Worth Gate Repair team fixes Mighty Mule gate openers all over the city. The thing that separates our Mighty Mule work here is simple: before we touch the control board, we check the post. Fort Worth’s Blackland Prairie clay heaves and shifts every single season, and a brand-new Mighty Mule arm mounted on a post that’s 1.5 inches out of plumb will strip its gears in under a year. That’s the repair most companies miss. Hal Gatewood has been fixing gates in this part of Texas since 2001, and we answer the phone ourselves. Call (877) 610-2993 for a straight answer.
Why Fort Worth Residents Choose Us for Mighty Mule Service
We work on Mighty Mule openers across Fort Worth every week, from the legacy MM271 swing-arm kits that have been running since the early 2000s to the current MM371W and MM562 dual-gate systems. That means we know which boards, limit switches, and arms actually fail on Fort Worth properties, and we know how to work around the brand’s proprietary parts without leaving you waiting on a backordered component for three weeks.
Hal Gatewood learned the fundamentals at Los Angeles Trade-Technical College downtown, then spent decades in the field learning what the classroom never quite covers. Things like why a gate that swings fine in February starts dragging every August when the ground shifts. We’re an independent Mighty Mule service provider, not manufacturer-affiliated or authorized. That’s actually good news for you: we fix what’s broken instead of reading from a corporate script. When we say we’ll be there, we show up. When we quote a price, that’s the price. And every job carries our 90-Day Done Right Promise in writing.
Common Mighty Mule Gate Repair Problems We Solve in Fort Worth
- Control board failure after thunderstorms. Power surges from lightning strikes fry the MM360 and MM371 boards, leaving gates dead with no diagnostic lights. Fort Worth’s spring storm season sends a surge through the low-voltage side that the factory surge protection simply doesn’t catch. We stock replacement boards for faster turnaround.
- Limit switch drift during temperature swings. The MM371W and MM562 arms have limit switches that drift when the temperature swings more than 40°F in a single day, which happens regularly during Blue Norther fronts. The gate stops mid-travel or crushes against the post. Recalibrating isn’t the fix; the switch itself usually needs replacement.
- Stripped plastic drive gears after ice storms. When Winter Storm Uri hit in February 2021, gates across Fort Worth got coated in heavy freezing rain. The nylon gear train inside a Mighty Mule arm strips before the arm body breaks, because the motor keeps pushing against a gate that won’t move. We repair arms with stripped gears when the arm body and motor are still sound.
- Water intrusion in the transformer compartment. MM271 installations with post-mounted boxes facing prevailing north winds and horizontal rain short out the low-voltage circuit. It looks like a board failure, but it’s often just a corroded terminal strip and a box that was never sealed properly when it was installed.
- Opener failing at the hinge, not the electronics. This is the one we see most in Fort Worth’s older neighborhoods. A perfectly good Mighty Mule opener gets blamed for a gate that drags, when the real problem is a rusted hinge plate pulling away from a clay-shifted post. Fix the hinge and the post first, and the opener usually works fine.
Mighty Mule Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s the information-gain fact that matters for every Mighty Mule owner in Fort Worth: in the established estate neighborhoods west of downtown, specifically Crestline, Monticello, and Berkeley Place in 76107, Mighty Mule openers mounted on 40-year-old ornamental iron gates almost always fail at the hinge plates before the opener itself. The real repair is re-plumbing the clay-shifted post and re-welding the hinge, not swapping the control board. Tarrant County’s moderately hard water leaves mineral scale on pivot points, and decades of deferred weld maintenance mean the iron itself is failing. If you swap the board on a gate whose hinges are pulling out, you’ll be back in six months with the same dead opener. We fix the gate first, then the opener. We’re one of the few shops in Fort Worth that welds on site, right in your driveway.
One example: our tech arrived at a Monticello home on Locke Avenue with an MM562 dual-gate setup that would only open halfway. Both hinges on the west gate post had pulled out of deteriorating welds as the Blackland clay heaved the post 1.5 inches out of plumb. We re-set that post with deep helical piers, re-welded the hinge plates, then recalibrated the MM562 arms so both gates cleared the driveway again. The opener itself was fine. The gate underneath it wasn’t.
Mighty Mule Models & Products We Service in Fort Worth
We service the full range of Mighty Mule product lines across Fort Worth: the MM271 legacy swing-arm opener, the MM371W single swing gate opener, the MM562 dual swing gate opener, and the FM500 automatic gate lock. We install Mighty Mule OEM boards, arms, and transformers when they’re available. For wear items like batteries, solar panels, and remote controls, we often use UL-listed equivalents with better cold-weather ratings than the factory parts, because Fort Worth’s ice storms and 100°F summers push those components harder than the manufacturer’s average test conditions. We keep common Mighty Mule parts stocked locally so a repair doesn’t have to wait on a shipment from Georgia. Most board swaps and gear replacements are done same-week, not same-month. For Mighty Mule sales & service questions across the metro, call us directly.
Mighty Mule Service Pricing in Fort Worth
Mighty Mule gate repair in Fort Worth typically runs $180-$340 for a service call and common repairs like limit switch replacement, transformer repair, or gear-train work. A full arm assembly replacement usually lands between $350 and $600 including parts and labor. Our Gate Installation - Fort Worth service for a complete new single-gate opener with a Mighty Mule arm, control board, and basic wiring starts around $700-$1,100, while dual-gate configurations run $1,000-$1,750 depending on gate weight and the condition of the hinge plates. Battery backup installation runs $300-$550, and adding an FM500 automatic gate lock runs $200-$400 installed. The price is quoted and agreed before any work starts. You’ll never see a bigger number at the end. Call (877) 610-2993 for a free estimate; Hal will tell you what it costs over the phone.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in Fort Worth
Lightning strikes near your property send a power surge through the low-voltage wiring and into the control board, frying the MM360 or MM371 board before the breaker can trip. We see this constantly in Fort Worth after spring storms. The fix is a board replacement, and we also recommend adding a surge protector on the AC side, which the factory installation doesn’t include. Call (877) 610-2993 and we’ll diagnose it over the phone.
Yes, you can usually keep the opener and the gate. The MM271 is a workhorse, but on older Fairmount gates the failure is almost never the opener itself. It’s the hinge plates pulling away from rusted, clay-shifted posts. We re-plumb the post, re-weld the hinge, and the opener runs again. The 90-Day Done Right Promise covers the repair in writing.
Only if the post is stable. Mighty Mule arms are rated by gate weight and length, and they’ll handle a heavy iron gate fine. The problem in Fort Worth is the expansive clay under the post. If the post heaves or tilts even an inch, the arm has to fight the misalignment and the gears strip. We re-set the post first, then mount the opener. That’s the sequence that makes the opener work long-term.
That’s water intrusion in the control box or the transformer compartment, usually on MM271 installations where the box faces north into horizontal rain. Water bridges the low-voltage circuit and the board reads it as an open command. Turn the opener off at the breaker, then call us. We’ll dry the box out, replace any corroded terminals, and reseal it. Call (877) 610-2993; the sooner it’s dry, the cheaper the fix.
Yes, we install battery backup on Mighty Mule systems all over Fort Worth. It runs about $300-$550 installed, depending on whether you have a single or dual gate and whether we need to add a solar panel for longer outages. After Uri in 2021, a lot of homeowners in 76107 and 76113 asked for this exact upgrade. The price is quoted before we start, and the install carries the same 90-Day Done Right Promise. Call (877) 610-2993 for an exact number.
Service Areas Near Fort Worth
Beyond Fort Worth, we take Mighty Mule service calls in the surrounding metro. If you’re out toward Riverside or up in the Fresno area, call and ask; we keep a route running and a live person answers around the clock. We also serve the broader Fort Worth service area, and for neighbors to the north, we offer Mighty Mule service in Plano and Mighty Mule service in Frisco.
Book Your Mighty Mule Service in Fort Worth Today
If your Mighty Mule gate is dead, dragging, or grinding, call (877) 610-2993. Hal answers the phone himself. Same-day and 24-7 emergency service is available across Fort Worth, and every job is quoted before work starts. Call me directly. If I don’t pick up, I’ll call you back, not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.