Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Mighty Mule Gate Repair in North Las Vegas, CA | Gatewood Fence & Gate
We provide Las Vegas Mighty Mule service across North Las Vegas, and the single thing that makes our work here different is this: we’ve mapped the city’s HOA wave-failure pattern. Thousands of Mighty Mule MM571W swing arms went into the 89084-89087 master-planned communities between 2005 and 2015, and now they fail in clusters every July and August when 115°F heat binds the worm gears. We stock what those streets need before the phone rings. Call (877) 610-2993 and you’ll get a live person who knows Mighty Mule and knows North Las Vegas.
Why North Las Vegas Residents Choose Us for Mighty Mule Service
We work on hundreds of Mighty Mule systems across North Las Vegas each year. Gate owners in the 89030-89084 corridor most often have entry-level Mighty Mule openers on swing and slide gates, and they need a shop that already stocks the modules and sensors. We see the same Mighty Mule failure patterns repeat block-by-block, and we pre-plan for them. Hal Gatewood has been fixing gates in the Valley since 2001, and his approach hasn’t changed: fix the gate in your driveway, weld on site, and stand behind the work in writing. We’re an independent Mighty Mule service provider, not manufacturer-affiliated, which means we answer to you and not to a corporate warranty department. Our Mighty Mule sales & service work covers everything from a dead MM371W board to a full opener replacement, and we service the whole North Las Vegas service area with a live person on the phone 24/7.
Common Mighty Mule Gate Repair Problems We Solve in North Las Vegas
- Dust-killed control boards on MM371W and MM372W. Windstorms off the open lots at the edge of the 89084 subdivisions blow fine silica straight into control board enclosures. The dust shorts limit logic and the gate forgets where it is. We see this in clusters after every major wind event.
- Stripped worm-gear arms on MM571W and MM572W. When HOA builders shimmed gates tight and 115°F thermal expansion removed all slack, something had to give. It’s usually the plastic worm gear, leaving the gate halfway open and the motor chattering against a bind.
- MM662 slide operators that stop recognizing magnetic travel stops. Three to five seasons of caliche dust pack the flywheel and mask the limit magnet. It reads like a dead board until you clean and re-align. We’ve saved plenty of Craig/Lamb commercial gates from a needless board replacement.
- FM200 solar packages failing on UV-cooked cables and corroded terminals. North Aliante sun cooks M12 solar cables fast, and summer monsoonal humidity corrodes battery terminals inside powder-coated post mounts. The gate works fine until it doesn’t.
- Gate sag on aging steel posts in 89030 and 89032. Older mid-century tract homes with manual slide gates on steel posts have a different problem: the post gives way before the opener does. We weld on site, get the post true, and the opener stops fighting the gate.
Mighty Mule Service in North Las Vegas: What Local Conditions Mean for Your Equipment
Here’s the thing about North Las Vegas that most gate companies don’t say out loud. The 2005-2015 HOA buildout in 89084-89087 installed thousands of Mighty Mule MM571W swing arms on plastic-powdered iron gates within a five-year span. Same builders, same hardware, same desert exposure, same install window. That created a predictable wave where whole streets of MM571W worm gears fail in the same July-August stretch each year, not scattered one-off failures. Our crew was called to a cul-de-sac off Camino Eldorado in the Aliante master-planned area where six MM571W arms had failed in the same week, binding at the worm gear from 115°F thermal lock. We replaced two older ones with new MM572W arms during our Gate Installation in North Las Vegas, re-shimmed three HOA gates that were tight from powder-coat welding, and torque-adjusted the remaining unit so all six held balanced load through July. The owners’ HOA manager told us their previous vendor had only replaced one arm at a time and missed the systemic alignment issue. That’s the difference between a gate company and a gate mechanic.
Mighty Mule Models & Products We Service in North Las Vegas
We stock factory Mighty Mule control boards, limit switch modules, and the exact RM200 receiver kits. Aftermarket boards for MM371W through MM680 units have poor caliche tolerance and cause callbacks, so we don’t use them. We service the MM371W and MM372W light-duty swing arms, the MM571W and MM572W medium-duty swing arms, the MM662 and MM680 slide openers, and the MMKIT2 and FM200 solar and accessory modules. When a Mighty Mule motor or welded hinge shows structural wear from 10-plus years of North Las Vegas dust, we replace the opener with a new Mighty Mule kit or upgrade to a heavier Ghost Controls or LiftMaster unit rather than repainting a failing drive. Fix the panel without the post and you’ll fix it twice.
Mighty Mule Service Pricing in North Las Vegas
North Las Vegas Gate Repair for Mighty Mule typically runs $180-$340 for board replacement, limit switch work, or gear arm service, and most jobs are done the same day we diagnose. Full opener replacement starts around $450-$850 depending on model and gate size. What drives the cost is what we find when we open the housing: dust damage, heat-warped gears, or wiring that’s been cooked for a decade. A free estimate means we look at your gate, tell you what’s actually wrong, and quote a price you approve before any work starts. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Call (877) 610-2993 and we’ll walk you through it.
Serving North Las Vegas, NV - Our Local Coverage Area
We’re based in the North Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in North Las Vegas
Because they were installed en masse between 2005 and 2015 on gates shimmed tight by tract builders, and 115°F thermal expansion removes all slack, stripping the plastic worm gear. When one fails, the rest of the street is days behind. Call (877) 610-2993 before July and we can pre-stock your HOA’s arms so you’re not waiting on a shipping delay mid-summer.
The FM200 will work, but the M12 solar cables and battery terminals take a beating from UV and monsoonal humidity inside powder-coated post mounts. We replace those proactively when we service solar systems in Aliante and the northern ZIPs. Call (877) 610-2993 for a free look at your setup.
Yes. We service and replace MM662 slide operators throughout North Las Vegas including the Craig/Lamb industrial corridor and Apex-adjacent facilities. Caliche dust is the usual culprit when those units stop recognizing their travel stops. Call (877) 610-2993 and we’ll get a tech out to diagnose.
Most of the time it’s dust packed into the control board enclosure shorting the limit logic. We clean, re-align, and test before selling you a board. If the board is genuinely dead, we stock exact replacements for MM371W units. Call (877) 610-2993 and we’ll tell you what we find.
No. We’re an independent Mighty Mule service provider. That means we stock factory parts and know the product line cold, but we’re not bound by a manufacturer’s replacement schedule. If a part should be cleaned and re-aligned instead of replaced, we tell you that. Call (877) 610-2993 for a straight answer.
Service Areas Near North Las Vegas
Beyond North Las Vegas, we take Mighty Mule calls throughout the broader Valley and into neighboring corridors. If your property sits close to the industrial edge near Craig and Lamb, we’ve got you covered. We also run Mighty Mule service in Buffalo and Mighty Mule service in Yonkers for clients who split time between states. The name is on the shop, and the shop is down the road.
Book Your Mighty Mule Service in North Las Vegas Today
A live person answers at (877) 610-2993, day or night. Same-day service is available for most Mighty Mule repairs across North Las Vegas. Call me directly. If I don’t pick up, I’ll call you back - not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Las Vegas since 2001.





Before
After
Before
After
Before
After