Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Roseville
Gate repair in Roseville typically runs $140 to $650 depending on whether we’re fixing a sagging hinge post, replacing an operator control board, or welding a cracked frame. Most jobs in Roseville are finished the same day Hal’s crew rolls up, and every repair carries the 90-Day Done Right Promise in writing. If you live off Foothills Boulevard, out in West Park, or inside Sun City Roseville, call (877) 610-2993 and a live person answers. Not a voicemail, not a queue. Hal Gatewood has been owner-operated since 2001, his name is on the shop, and his published address and license number mean you can look him in the eye before he ever touches your gate.
Why Gatewood Fence & Gate Is Roseville’s Preferred Gate Repair Company
Roseville homeowners have a specific problem most gate companies never see coming: thousands of HOA-approved gates installed during the master-planned building boom went in within the same few years, by the same few contractors, using the same operator models. That means when a Viking board fails on one Fiddyment Farm street, it usually fails on the house two doors down within a month. We’ve learned these communities street by street, and our Gate Repair crew brings that pattern knowledge every time we pull into a 95747 driveway.
Roseville customers call us because the person who shows up is the person whose name is on the invoice. Hal runs the crew, welds on site in your driveway, and stands behind every job with a written 90-Day Done Right Promise. No runaround, no “we don’t cover that.” One call brings him back. We also answer the phone 24/7 with a real person, so when your gate stops opening at 9:30 on a Saturday night, you’re not leaving a message with a call center three states away. You’re talking to someone who knows Roseville.
There’s no trip charge inside the county, and every repair over $200 gets $40 off. Seniors and veterans keep a permanent 10% discount. The estimate is agreed before work starts, and the price doesn’t change at the door.
Our Gate Repair Services in Roseville
Electric Gate Repair
Roseville’s inland valley heat, routinely 105°F in July and August, cooks operator circuit boards and hydraulic seals well before the manufacturer’s rating. An electric gate that opens by itself, stops mid-cycle, or ignores the remote is almost always a board, capacitor, or limit switch issue we can diagnose on the spot. We service Viking, LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule, and we stock the common boards and capacitors for the Roseville-heavy models so you’re not waiting on a freight truck from Southern California.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Roseville’s 1990s tract homes in 95678 have powder-coated iron gates that have now spent 20-plus years under automatic sprinkler overspray, and we regularly find the hinge post base rusted through at the concrete line while the gate leaf itself is still solid. Fix the panel without the post and you’ll fix it twice. Hal cuts the old post at ground level, welds a new steel post in place, and repacks the footing so the gate swings true.
Automatic Gate Repair
If your automatic gate grinds, binds, or throws an entrapment error in the August heat, you’re not imagining it. Thermal expansion of the gate leaf against a fixed latch post is a real failure mode we see constantly across Roseville, especially in Sun City where pedestrian gates run lighter-duty swing operators. We check the full travel path, reset the limits, correct the sag, and replace worn planetary gears or belts. When we leave, the gate opens and closes like the day it was installed.
Gate Realignment
Slide gates in 95747 collect decomposed granite fines from adjacent landscape beds, and after winter rains the fines wash onto the rack-and-pinion track and jam the rollers. The gate starts shuttering, the safety photocell loop shorts, and the whole thing stops. We clean the track, adjust the rack mesh, reset the photocells, and bond the track edge so it sheds water instead of silting again. Most realignments are done in under two hours and cost between $160 and $390 in Roseville, depending on how far the gate has drifted and whether the rollers need replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roseville
We’re certified to work on nine major gate brands, and in Roseville the ones we see most are Viking, LiftMaster, and DoorKing from the mid-2000s building surge, plus Ghost Controls and Elite on newer semi-custom homes in Crocker Ranch and Granite Bay. We keep the common boards, capacitors, limit switches, and gear kits for these units on the truck, so a repair that another company might wait a week to order parts for, we finish while the coffee’s still warm. A technician who learns one community’s hardware quirks can often replicate that fix across dozens of nearly identical nearby gates, and we’ve done exactly that in West Park and Fiddyment Farm.
Common Gate Repair Problems We See in Roseville Homes
- Clustered operator failures in 95747 HOA tracts. Gates installed during the mid-2000s construction surge share the same control boards and the same heat-soak weakness. When one fails on a street, we check the neighbors, because they usually will too.
- Rust at the hinge post base on 1990s tract homes in 95678. Two decades of sprinkler overspray against a powder-coated post causes corrosion right at the concrete line. The post leans, the gate drags, and the opener burns out trying to swing a gate that won’t move.
- Summer entrapment errors in Sun City Roseville. The August heat makes the gate leaf expand against the latch post, and the opener’s safety circuit reads it as a blocked path. It’s a seasonal sag correction job, not a new opener, and it should be done before you leave for a summer trip.
- Slide gate track fouling in 95747. Decomposed granite fines from landscaped beds wash onto the rack-and-pinion track after heavy winter rains, jamming the gate and shorting the safety photocell loop. A track clean and edge bonding prevents the recurrence.
Pricing for Gate Repair in Roseville, CA
A typical gate repair in Roseville runs $140 to $650. Hinge and post repair usually falls between $280 and $520, depending on whether we’re cutting out and replacing the post or just realigning the weld. Automatic gate operator board failure runs $190 to $410 for the board, capacitor, and labor on the common Viking and LiftMaster units. Full gate realignment, including track cleaning and photocell reset, runs $160 to $390. Every job gets a written quote before we start, the price is agreed up front, and the estimate doesn’t change at the door. Seniors and veterans take 10% off, any repair over $200 gets $40 off, and there’s no trip charge inside the county. Call (877) 610-2993 and we’ll tell you over the phone what you’re likely looking at.
We Also Serve Cities Near Roseville
Our Gate Repair in Roseville crew also gets called out to Rocklin, Citrus Heights, Antelope, and Granite Bay. Same owners, same written guarantee, same live person on the phone. If you’re outside Roseville, we’ll still give you an honest answer about whether we can get to you today or first thing tomorrow.
Serving Roseville, CA - Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Roseville
Yes, that’s almost certainly the same swollen-capacitor board failure we’ve fixed on dozens of West Park and Fiddyment Farm streets. The operator box sits in direct afternoon sun, the capacitor swells from heat soak, and the board stops responding to the remote. We swap the Viking board, add a vented cover where the box sits in full sun, and walk two doors down to check the neighbor’s unit, because on those streets they fail in clusters. Call (877) 610-2993 and we’ll confirm over the phone before we even roll out.
Schedule it before you leave. The grinding is the gate leaf expanding in the heat and dragging on the concrete or binding against the latch post, which forces the swing operator’s gear train to work against the gate. Left alone, it burns out the planetary gears or pops the entrapment sensor entirely, and you come home to a gate that won’t move. We do a seasonal sag correction and limit reset, usually under $300, and you won’t worry about it from wherever you’re spending July.
It can, and it usually is. The Crocker Ranch plots were all built within a narrow construction window, and while different framing crews built the houses, the gate operators were permitted and installed by the same handful of Roseville-area subcontractors using the same models in the same season. That means identical boards aging at the same rate, and failures clustering street by street. We’ve learned to check a Crocker Ranch call’s neighbors before we even load the truck, because a second or third unit is rarely far behind.
Most automatic gate openers in Roseville have no battery backup unless one was added at installation, or retrofitted later. When PG&E cuts power, the opener goes dead and the gate stays wherever it stopped. That’s the worst case for a 55-plus community, because it can trap you in or out. We install battery backup units that hold the opener through a full day of outage, and we can add one during any regular repair visit. It’s a simple retrofit, usually $220 to $380 on top of the repair.
Fix the post. A sagging gate almost never means a new gate leaf; it means the hinge post has rusted at the base or the footing has settled, and the whole assembly is leaning. Hal cuts out the old post at the concrete line, welds in a new steel post, repacks the footing, and re-hangs the gate leaf. You keep the gate, the hardware, and the look the HOA approved, and the repair usually runs $280 to $520 depending on post size and whether we’re re-setting one post or both.
Contact Us for Gate Repair in Roseville
If your gate won’t open, sags, grinds, or ignores the remote, call (877) 610-2993 now. A live person answers every time, and we’ll tell you straight what’s likely wrong, what it costs, and when we can be there. No trip charge inside the county, free estimates, and the 90-Day Done Right Promise in writing on every job. Hal Gatewood’s name is on the shop and on every invoice, and he’s been fixing gates since 2001. Not passing through.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Roseville and surrounding communities since 2001.