Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arcadia
Gate repair in Arcadia usually means one of two jobs: a sagging hinge post on an older ranch home off Baldwin Avenue, or a heavy custom iron gate on a newer foothills estate that’s stopped responding. Most callers in the 91006, 91007, 91066, and 91077 zips want it fixed today because a gate that won’t close is a gate that won’t keep anything in or out. We answer the phone with a live person every time you call (877) 610-2993, and we’ll give you an honest read on whether that gate can be repaired in your driveway or needs real fabrication work before we touch a single bolt. Hal Gatewood has been fixing gates since 2001, and he still shows up to the job himself more often than not. You’ll know who you’re dealing with, because his name is on the shop and on every invoice.
Why Gatewood Fence & Gate Is Arcadia’s Preferred Gate Repair Company
We’re not a dispatch board routing strangers to your house. Gatewood Fence & Gate is owner-operated, and when you call about a gate that’s racked in a Santa Ana wind or an opener that’s grinding through its gears, the person who answers knows what you’re describing. We’ve worked on gates up along Highland Oaks Drive, through the neighborhoods near the Arboretum, and across the older ranch tracts south of Huntington Drive. Arcadia has its own weird gate problems, and we’ve seen enough of them to know what fails first and what actually holds up.
Every job we do carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings Hal back. No runaround, no fine print, no “that’s a different department.” We also offer a free second opinion on any written estimate you’ve gotten from another company, no trip charge inside Los Angeles County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Those aren’t gimmicks. They’re how we’ve kept working in the same communities for over 29 years.
Our Gate Repair Services in Arcadia
Electric Gate Repair
Electric gate repair in Arcadia usually starts with the control board or the safety photocells, especially after a Santa Ana wind event trips the obstruction sensor a dozen times and the system faults out. We service motors and boards from Linear, Viking, Ghost Controls, DoorKing, and the other major brands, and we carry common replacement parts on the truck so we’re not leaving your gate dead while we order a board. If your Arcadia gate opens halfway and stops, or holds open and won’t close, call us and we’ll talk through what you’re seeing before we even send the truck.
Automatic Gate Repair
Automatic gate repair on Arcadia’s newer luxury estates often means working on a gate that was fabricated overseas and shipped in, with an operator that doesn’t quite match the gate’s weight or swing profile. That mismatch is exactly what we’re good at, because Hal welds on site and modifies brackets and arms to fit what’s actually in your driveway, not what a U.S. parts catalog says should be there. We’ll tune the loop detector, check the entrapment protection, and make sure the opener motor isn’t working twice as hard as it needs to.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Arcadia’s foothill wind corridors put real stress on hinge welds, and we regularly see posts that have been pulled out of square or welds that have sheared clean through after a big gust. We cut out the failed weld, refit the post, and use stainless fixings on the rebuild so you’re not calling us back after the next wind event. Fix the panel without the post and you’ll fix it twice. We’d rather do it once.
Gate Realignment
When a heavy custom swing gate starts dragging or the latch won’t catch, realignment is usually the first fix, not the last resort. We see it all over Arcadia, from the motor courts off Canyon Road to the older homes along Duarte Road, where gates have been settling for decades. We reset the hinge geometry, shim the posts properly, and adjust the operator limit switches so the gate opens and closes without stress. If the gate was never installed square to begin with, we’ll tell you that too and show you exactly what needs correcting.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arcadia
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters in Arcadia because so many of the newer estate gates run on multi-brand setups, a Viking opener here, a DoorKing keypad there, a Ghost Controls remote kit on the pedestrian gate. We stock common boards, remotes, photocells, and hardware for the brands Arcadia homeowners actually have, and when something needs a custom fix, we modify it on site rather than telling you to wait three weeks for a backordered part. Our Gate Repair team carries what’s needed to keep your gate working in the foothills.
Common Gate Repair Problems We See in Arcadia Homes
- Santa Ana wind damage to hinge welds. Arcadia sits right at the base of the San Gabriel Mountains, and when the Santa Anas funnel through the foothill corridors, they hit heavy ornate gates hard enough to shear welds and rack frames. Gates up near Highland Oaks and Canyon Road catch it worst, but we’ve seen the same damage down in the flats.
- Overseas-fabricated gates with non-standard hardware. Many of Arcadia’s luxury iron gates were custom-fabricated overseas and shipped in. The hinge specs, weld profiles, and bracket dimensions often don’t match U.S. standard parts, and stock replacement arms or hinges don’t fit without field modification. This is a distinctly Arcadia problem; drive a few miles west to Pasadena or east to Covina and you don’t see it nearly as often.
- Operator gear assemblies wearing out fast in dry heat. Arcadia’s hot, dry summers accelerate grease breakdown inside LiftMaster and BFT gear assemblies. When the grease thins out or dries up, the rack and pinion strips or the motor burns out, especially on oversized swing gates that were never sized right for their weight.
- Safety photocells tripping repeatedly during wind events. Wind gusts shake gate panels and rack the frame just enough to break the photocell beam or knock the sensor out of alignment. The gate stops, reverses, or refuses to close, and the homeowner can’t figure out why. We realign and harden the mounts so the next gust doesn’t take your gate offline again.
Pricing for Gate Repair in Arcadia, CA
A typical hinge and post repair in Arcadia runs $225 to $525 depending on how far the post has moved and whether we need to weld or rebuild the bracket. Automatic gate repair, including control board replacement or limit switch adjustment, typically lands between $180 and $450. Weld and rust repair on an iron gate usually runs $250 to $600, and a full operator replacement on a heavy custom swing gate can run $900 to $2,800 depending on the brand and capacity. Here’s the breakdown:
- Hinge & post repair: $225-$525
- Automatic gate / opener repair: $180-$450
- Weld & rust repair: $250-$600
- Full operator replacement: $900-$2,800
- Gate realignment: $150-$400
Whatever the number, you’ll get it in writing before any work starts, and that’s the number you’ll pay. No ladder pricing, no “we found something else while we were in there.” If we spot a problem mid-repair, we stop and show you before we do anything about it. Call (877) 610-2993 for a free estimate, and remember, the quote is agreed before we touch the gate.
We Also Serve Cities Near Arcadia
Our service area reaches beyond Arcadia into the neighboring San Gabriel Valley communities, including Mayflower Village, Sierra Madre, Monrovia, and Temple City. If you’re in one of those areas and your gate is acting up, you’ll get the same owner-operated service and the same written 90-Day Done Right Promise. Learn more about our Gate Repair in Arcadia coverage or call us directly and we’ll tell you when we can be there.
Serving Arcadia, CA - Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arcadia
The wind didn’t just crack it; it found the weakest point in a gate that was already loaded wrong or welded thin. Arcadia’s foothill corridors funnel Santa Ana gusts directly through neighborhoods near the base of the San Gabriels with enough force to rack heavy custom gates and shear hinge welds. The fix is cutting out the failed weld and rebuilding the hinge with stainless fixings, not just laying another bead over the crack and hoping. If your gate was fabricated overseas and welded light, it’ll fail again until the hinge geometry and material are corrected. Call (877) 610-2993 and we’ll come take a look.
Yes, and this is one of the most common jobs we see in Arcadia. We rebuilt a pair of ornate swing gates on a Highland Oaks Drive motor court after a Santa Ana wind event sheared both hinge welds and cracked the gate operator’s rack and pinion. Our crew cut out the failed welds, refit the hinge posts with stainless fixings, and replaced the stripped rack with a modified profile to match the custom-fabricated gate, then re-tuned the loop detector and safety photocells for proper entrapment protection. Hal welds on site, so your gate stays in your driveway while we modify brackets and arms to fit. Call us for a free second opinion on any written estimate you’ve already gotten.
Once a year, minimum, and ideally before summer hits. Arcadia’s dry heat breaks down the grease in LiftMaster and BFT operator gear assemblies faster than coastal cities see, and a stripped rack and pinion or burned-out motor is the result of waiting too long. We’ll open the operator, clean out the old grease, pack the gears properly, check the limit switches and photocells, and catch small problems before they turn into a gate that won’t open on a 100-degree afternoon. Call (877) 610-2993 to schedule a service visit.
It’s common in Arcadia, but it’s not something you should live with. When Santa Ana wind gusts shake the gate panel, the frame racks just enough to break the photocell beam or shift the sensor out of alignment, and the gate stops or reverses as a safety response. We correct the alignment and harden the mounting so the sensor stays put, and if the gate itself is flexing too much, we’ll show you where the structural problem is before you pay for another sensor adjustment. A gate that false-trips every wind event is a gate that’s wearing itself out.
Almost always, yes. Surface rust usually means grinding back to clean steel, treating the area, and repainting with the right coating for this climate. Deeper pitting or a corner that’s rusted through may need a welded plate or a section splice, which we do on site. We don’t push replacement on a gate that can be saved; Hal’s whole approach is fix what’s fixable. If the rust has compromised the hinge posts, that’s a different conversation, but you’ll see the evidence before we ask you to spend a dollar.
Call Gatewood Fence & Gate for Gate Repair in Arcadia
If your gate is sagging, stuck, grinding, or just won’t stay closed, call (877) 610-2993. A live person answers around the clock, not a voicemail or a call center. We’ll ask what the gate’s doing, give you a straight answer, and schedule a time to come out to your Arcadia home. Every job is quoted and agreed before we start, backed by the 90-Day Done Right Promise in writing, and done by someone whose name is on the shop and whose address anyone can look up. That’s the oldest kind of accountability there is, and it’s the only kind we work under.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arcadia since 2001.