Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lakewood, CA
Gate repair in Lakewood typically costs $180-$480 for common hinge, latch, and realignment work, and most repairs are scheduled within one to two days. Every price is quoted in writing before we touch a bolt. If your side gate is dragging, sagging, or the opener stopped responding in the 90712 or 90713 ZIP codes, call Hal at Gatewood Fence & Gate at (877) 610-2993 and we’ll get eyes on it.
Lakewood’s ranch homes went up fast between 1950 and 1953, and the hardware on those side-yard gates went in at the same time. We get calls every week from homeowners off Bellflower Boulevard, Carson Street, and the neighborhood pockets around Mayfair Park who are tired of propping a sagging gate open with a brick. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.
Why Lakewood Homes Are Different
Lakewood is one of America’s first mass-produced postwar planned suburbs, built almost entirely between 1950 and 1953, leaving the city with thousands of nearly identical ranch-style tract homes now over 70 years old. Their side-yard and driveway gates are aging in lockstep, and combined with salt-laden marine air drifting inland from the adjacent Long Beach coastline, iron and steel gates here corrode measurably faster than in drier inland LA County cities. Rust remediation and hardware replacement are a near-universal upsell on every Lakewood gate call.
Because the city was platted and built by a single developer to one master plan, a veteran Lakewood gate tech learns quickly that side-yard gate rough openings on the original 1950s homes are almost always in the 38-42-inch range with posts set at the same relative corner position. This city-wide uniformity simply doesn’t exist in organically grown neighboring cities like Long Beach or Bellflower. It means we know what to bring, but it also means whole blocks hit identical failure points simultaneously as original and replacement hardware reaches end-of-life together.
The marine layer that rolls in most evenings carries enough salt to work into welds and bolt holes over a decade or two. Wood gates have their own problem: the same damp air keeps boards swollen, so a gate that scrapes in January might swing free by August, then bind again in November. We check the post condition on every single Lakewood gate call instead of just tightening the band and leaving.
Gate Repair in Lakewood
Most gate repairs in Lakewood fall between $180 and $480, with same-day scheduling available for stuck or fallen gates and Hal usually arriving within 90 minutes for emergencies. The predictable pattern of 1950s ranch-home gate failures - corroded hinge posts at the footing line, seized galvanized hardware, and swollen wood panels - means we diagnose fast and fix right the first time. Gate Repair is what we built this company on, and Lakewood’s uniform housing stock lets us keep parts on the truck that fit.
Electric Gate Repair
Electric gate operators in Lakewood work hard and die young thanks to the marine layer. Corroded terminal connections on loop detectors and safety photocells are the usual culprits, causing intermittent faults that make your opener work one day and refuse the next. We diagnose the operator board, photocells, limit switches, and wiring on site, and we stock replacement parts for Viking, Ghost Controls, and DoorKing so we’re not waiting a week on a distributor. Electric gate repair in Lakewood starts at about $180 for diagnostic work and simple fixes, and runs up to $600 when a control board has to be replaced. UL 325 entrapment protection checks are part of every automatic gate repair we do, because a gate that closes on its own is a gate that’s failing.
Hinge & Post Repair
This is the single most common gate failure we see in Lakewood, and it follows a predictable pattern. The original hinge post, set at the same corner position on nearly every 1950s ranch lot, corrodes at the footing line where salt-laden moisture collects against the concrete. The gate starts sagging into the latch side because the post has given up, not the panel. Hinge and post repair in Lakewood typically runs $220 to $480, depending on whether we’re replacing seized hinges or resetting the entire post in fresh concrete with stainless fixings. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that drags on the ground or won’t latch is slowly wrecking its own hardware. In Lakewood, where wood gate components stay damp under the marine layer and swell against the frame, misalignment compounds fast. We check the post plumb, hinge wear, and latch position, then rehang the gate on fresh hardware and adjust the swing so it clears by a consistent gap. Gate realignment lands between $150 and $300 on most 1950s side-yard gates. A properly aligned Lakewood gate should open with one hand and stay where you leave it.
Why do gate hinges rust faster in Lakewood than in Downey or Norwalk?
Lakewood sits only a few miles inland from the Long Beach harbor, so the persistent marine layer carries salt air that settles on iron and steel hardware and eats through galvanized coatings in 15 to 20 years. The drier air in Downey and Norwalk lets the same hardware last decades longer. When we repair a Lakewood gate, we use zinc-rich primers, stainless fixings, and hot-dipped hardware specified for coastal exposure. Call (877) 610-2993 for an exact quote - estimates are free.
My 1950s Lakewood side gate is sagging but the panel looks fine - what actually broke?
The hinge post is the failure point, not the panel. On the original Lakewood ranch homes, side-yard gates were built to a standard rough opening with the post set at the same relative corner position, so salt-laden moisture collects at the footing line and corrodes the post base until it can’t hold the gate’s weight. We reset the post in fresh concrete with stainless fixings and realign the gate, usually the same day. Call (877) 610-2993 and we’ll confirm what’s needed before any work starts.
Gate Installation in Lakewood
New gate installation in Lakewood typically runs $1,800 to $6,500 depending on style, material, and whether the old gate and posts come out first. Most driveway gate projects complete in one to three days after materials are on hand. If you’re calling from the 90712 or 90713 side of town, we can usually have someone out to measure within a day or two, and you’ll always get the price on paper before any work begins. Gate Installation is measured, ordered, and scheduled - never rushed.
Driveway Gate Installation
Driveway gate installation in Lakewood usually runs $2,500 to $6,500 for a full project: removal of the old gate, new posts set in concrete, the gate built or fabricated to fit, and the hardware mounted and adjusted. On the original 1950s tract homes, the side-yard driveway rough opening is almost always in the 38-to-42-inch range, so we can often pre-fabricate components and cut installation time down substantially. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
Pedestrian gates in Lakewood run $900 to $2,800 installed, depending on whether we’re building from scratch or replacing a gate that’s been binding against a settled post for years. These are the side-yard gates between house and fence, the ones that get used ten times a day and get ignored until they won’t latch. The marine layer keeps wood damp longer here, so hinge rot and post lean are common failure points. We’ll fix the panel with the post, not just swap the panel and leave the underlying problem for next year.
Sliding Gate Installation
Sliding gate installation in Lakewood runs $3,200 to $7,500 for a motorized single-track system on a residential driveway. The older Lakewood lots tend to be compact, which makes a slide gate smart where a swing arc would clip a car or a fence. These need a steel track bedded in concrete, a cantilever or tracked roller system, and careful leveling. We’ve done enough of these on Clark Avenue and Bellflower Boulevard side streets to know where the grade shifts and where water pools after rain. Show me the gate closing on its own and I’ll show you where it’s failing.
How much does a new driveway gate cost in Lakewood?
A full driveway gate installation in Lakewood typically runs $2,500 to $6,500 including removal, posts, gate, and hardware. Automation adds $1,500 to $3,500 depending on the operator and whether we’re running power to the post. The price we quote is the price on your invoice, agreed before any work starts. Call (877) 610-2993 to schedule a free measure and written estimate.
Can you match my 1950s ranch home’s existing gate style?
Yes. Lakewood’s original tract homes share standardized gate configurations, so we know the proportions and hardware patterns that look right. We can replicate wrought iron scrollwork, board-and-batten wood gates, or simple tubular steel designs to match what’s there. Every gate is built to fit your opening, not pulled from a warehouse rack. Call (877) 610-2993 and we’ll show you options.
Gate Motor & Opener in Lakewood
Most gate motor repairs in Lakewood run between $185 and $390, and on the Lakewood side of the 605, we can usually have Hal or a crew member at your driveway the same day you call. If your gate motor started grinding, buzzing, or just quit mid-swing, you’re probably worried about two things: how much it’ll cost and whether whoever fixes it will actually show up and stand behind the work. Here’s the straight answer. Gate Motor & Opener service includes diagnostic, repair, and replacement for every major brand we carry parts for.
Motor Installation
A new gate motor in Lakewood, installed properly, should give you ten to fifteen years of daily openings before anything major fails. The key word is properly. We see too many Lakewood installs where somebody bolted a motor to a post that was already leaning, set the force limit to “shove,” and called it done. Hal won’t do that. We check the post, the hinge alignment, the gate weight, and the stop points before the motor ever comes out of the box. A typical single-swing arm motor installation in Lakewood runs $650 to $1,100.
Motor Repair
Most gate motor failures in Lakewood happen in one of a handful of predictable places: the capacitor gave out, the control board got fried by a power sag, a limit switch seized up, or the motor has been fighting a binding gate so long it burned something out. We diagnose those on site, usually in under an hour. Repair cost here runs $185 to $390 in most cases. The exception is when the board is dead and the motor is ten years old or more. At that point spending $300 to patch a $900 system doesn’t make sense, and we’ll tell you so.
Linear & Slide Motors
Linear gate motor arms are common on Lakewood’s side-yard gates because they bolt cleanly onto the standardized post placements on the old tract lots. Repair usually runs $160 to $340, and full replacement with a new Linear arm lands between $550 and $950. Slide gates in Lakewood show up more on the wider lots near the 91 side of town. A slide motor that grinds or shudders usually means the rack is out of line, a roller wheel has gone flat, or the gate has sagged enough to ride on the rail. That sag is the root cause more than the motor itself. Repair runs $220 to $420 for most slide motor work.
How fast can you get to a Lakewood home for a gate motor repair?
Same day in most cases, usually within a few hours depending on where you are in Lakewood and what’s on the schedule that morning. The 605 and the 91 can add 15 minutes during rush, but most Lakewood calls have us at your gate inside a two-hour window. If your gate is stuck open or stuck closed at 2 a.m., the phone still rings and a person still answers. Call (877) 610-2993.
Is gate motor service in Lakewood more expensive than nearby cities?
Not really. We charge the same rates in Lakewood as we do in Bellflower, Long Beach, or Signal Hill. What does change is the repair pattern. Lakewood gates lean harder on corrosion and post movement than inland cities a few miles east, so a repair here might include hinge or post work that wouldn’t be needed in Downey or Norwalk. The motor work itself is the same price. Call (877) 610-2993 for a free estimate.
Gate Access Control in Lakewood
Gate access control repair and installation in Lakewood comes down to one thing most companies miss: the salt air. We work on gates all over this city, from the ranch homes off Del Amo to the streets feeding into Lakewood Boulevard, and the marine layer drifting in from Long Beach does something predictable to gate hardware. Keypad contacts corrode. Control boards fail. Hinge posts rust at the base. Gate Access Control is where electronics meet Lakewood’s coastal reality, and we know which part to fix first.
Keypad & Remote Entry
We install and repair wired and wireless keypads on gates throughout Lakewood. The ones that survive here are the sealed, weatherproof units. The cheap plastic keypads fail inside three years because the marine layer keeps the circuit board damp even when it’s not raining. A keypad replacement runs $180 to $340 installed, depending on whether we’re replacing a single keypad or adding a second station. When your remote works only from ten feet away, the problem is rarely the battery. The receiver board inside the operator often has salt-crusted terminals or a failing antenna connection, and a new receiver board for a Linear or DoorKing operator typically lands between $250 and $420 parts and labor.
Smart Access Retrofit
You can add phone-based access to an original 1950s side-yard gate without tearing out the whole gate. We retrofit smart controllers that tie into your existing operator and add app-based open/close commands, scheduled access, and entry logs. For homes in Lakewood with original posts still in decent shape, this is usually a half-day job. Full smart access retrofits, including the controller and phone app setup, usually run $450 to $800 on the 38-to-42-inch Lakewood openings.
Card Reader Systems
Card readers and fob systems make sense for Lakewood homes with shared driveway gates, rental units, or regular visitors like caregivers and housekeepers. We install proximity readers rated for exterior coastal use and wire them into the operator with sealed connectors. The difference between a reader that lasts two years and one that lasts ten is the enclosure and the wiring method, and we spec both for salt air. A sagging post reset with welding runs $300 to $600 depending on footing condition, because no access control system works on a gate that won’t physically move.
Why does my gate keypad stop working every few years in Lakewood, even after changing batteries?
Because the keypad circuit board is corroding from salt air, not losing battery power. The marine layer off Long Beach keeps the inside of the keypad damp, and the copper traces oxidize until the buttons stop registering. The fix is a sealed keypad rated for exterior coastal exposure, plus sealed wire connections. Call (877) 610-2993 and we’ll swap it and treat the wiring so you’re not redoing this every three years.
My swing gate is sagging and the remote control works but the gate won’t open. Is it the motor?
Rarely. The motor is trying to move, but the gate is bound up because the hinge post has shifted or rusted at the base. We see this all the time on Lakewood gates from the 1950s. We reset the post footing, straighten the gate, and the existing motor and remote usually work again. Don’t pay for a new operator until the post is ruled out. Call (877) 610-2993 for a free second opinion.
Gate Parts & Welding in Lakewood
A gate hinge snaps in Lakewood and suddenly the side yard is wide open, a post leans toward the driveway, or the latch won’t catch at all. We fix those problems the right way the first time, usually the same day you call, with welding done right in your driveway on our truck rig. Gate Parts & Welding keeps your original gate in place, where it belongs.
Hinge & Post Welding
A sagging gate in Lakewood almost always starts at the hinge post, not in the middle of the panel. The salt-laden marine air drifting in from the Long Beach harbor eats steel hinges faster than you’d expect, especially on the original 1950s wrought iron gates all over 90712 and 90713. We cut out the old hinge, weld in a new one on site, and the gate swings level again the same day. A hinge replacement on a standard Lakewood side-yard gate typically runs $180 to $320, depending on whether one hinge or the full pair needs to come out.
Rail & Custom Welding
Bottom rails on Lakewood driveway gates take a beating from the marine layer and from sprinkler overspray, which keeps steel wet for months at a time. When the bottom rail rusts through, the whole gate flexes. We’ll cut out the rotted section, weld in new steel, and paint it to blend. Rail repair usually lands between $220 and $420, and custom welding work is quoted by the piece, but most Lakewood jobs fall in the $150 to $600 range. Some Lakewood side-yard rough openings aren’t the standard size, especially on corner lots. When a stock part won’t fit, Hal welds what the gate needs right there in your driveway.
Post Replacement
The gate posts set during Lakewood’s original 1950-1953 construction boom are now over 70 years old, and many are rusting through at the base where they meet the concrete. We dig out the old post, set a new one square and plumb, and weld the gate back into alignment. Post replacement is the bigger job: $450 to $850 on average, because the old concrete has to be broken out and a new footing poured. You don’t lose the gate. You keep the one that matches the house, and the post is the only thing that changes.
How fast can you get to Lakewood for a gate emergency?
For a gate that won’t close or a post that’s about to drop, we’re typically on site in Lakewood within 90 minutes to 2 hours, and a live person answers the phone around the clock at (877) 610-2993. If you need someone today, call now and we’ll tell you exactly when the truck will arrive.
What warranty do I get on welded gate repairs in Lakewood?
Every job carries the 90-Day Done Right Promise in writing. If the weld fails, the hinge sags, or the post shifts within 90 days, one call brings Hal back to make it right at no charge. It’s a written promise on your invoice, not a verbal assurance. Call (877) 610-2993 with any concern during those 90 days.
Brands We Service in Lakewood
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing operators locally, so most Lakewood repairs don’t wait on a distributor shipment. If your operator is one of these brands, we can likely fix it same day. See our brands for the full list and compatibility notes.
Pricing for Gate Repair in Lakewood, CA
| Service | Typical Range in Lakewood |
|---|---|
| Hinge & post repair | $220 - $480 |
| Gate realignment | $150 - $300 |
| Weld & rust repair | $180 - $400 |
| Electric gate repair (diagnostic to board replacement) | $180 - $600 |
| Pedestrian gate installation | $900 - $2,800 |
| Swing gate installation | $1,800 - $4,500 |
| Driveway gate installation | $2,500 - $6,500 |
| Sliding gate installation | $3,200 - $7,500 |
| Gate motor repair | $185 - $390 |
| Swing arm motor replacement | $650 - $1,100 |
| Linear arm replacement | $550 - $950 |
| Keypad / access control replacement | $180 - $420 |
What pushes prices up in Lakewood is almost always corrosion: salt-thinned posts, rusted hinges, and control boards with moisture damage take more time and material to fix right. What keeps prices fair is that we quote the full job before starting, and that number is the number on your invoice. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate from another company.
Neighborhoods We Serve in Lakewood
We work all over Lakewood, from the tree-lined streets near Mayfair Park to the industrial edge along the 605. Most repair calls get a same-day visit, and Hal usually arrives within 90 minutes for a stuck or fallen gate. The original 1950s tracts repeat the same gate layouts block after block, so we know what we’re walking into before we step out of the truck.
- Mayfair
- Carson Park
- Lakewood Mutual
- East Lakewood
- Lakewood Park
Service Area - Cities Near Lakewood
We dispatch and schedule from our Los Angeles office, with crews serving Lakewood locally every day. Our normal service area includes Lakewood, CA, Signal Hill, CA, Bell, CA, Bellflower, CA, Long Beach, CA, and Paramount, CA. No trip charge applies to any of these cities.
Serving Lakewood, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lakewood and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Lakewood coverage area; if your address is on it, we can help.
Also serving nearby: Lakewood, CA, Signal Hill, CA, Bell, CA, Bellflower, CA, Long Beach, CA, Paramount, CA.
FAQs About Gate Repair in Lakewood
Yes. We work throughout 90711, 90712, 90713, and 90714, from the neighborhoods around Del Amo Boulevard to the streets lining Lakewood Boulevard and Bellflower Boulevard. Every Lakewood ZIP is in our normal service area with no trip charge. Call (877) 610-2993 to schedule.
Most simple gate repairs and like-for-like replacements don’t trigger a permit, but any new driveway gate with automation or a structural post change may need review. We know Lakewood’s requirements and will tell you upfront if your project needs paperwork. If it does, we handle the details so you’re not chasing permits yourself. Call (877) 610-2993 and we’ll walk through your specific situation.
If the repair or installation isn’t done right, we come back and make it right within 90 days. That’s the entire promise, and it’s in writing on every invoice. If a weld fails, a motor we replaced quits, or our alignment drifts, we take care of it at no charge. In a city where every block shares the same gate design and the same coastal conditions, we stand behind every job without hedging. Call (877) 610-2993 with any concern.
Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on any gate repair, installation, or welding job in Lakewood. A live person answers day or night, and Hal will give you a straight price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks