Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Louisville
If your gate sags, scrapes, or won’t latch in Louisville, the fix usually comes down to a hinge, a post, a rail, or a weld, not a whole new gate. A typical hinge replacement in Louisville runs $125-$260, and most welding repairs we handle are done on-site in a single visit. We’ve worked gates from St. Matthews to Okolona since 2001, and we still answer the phone with a live person when you call (877) 610-2993. Hal Gatewood’s name is on the shop, and the shop is down the road.
Why Gatewood Fence & Gate Is Louisville’s Preferred Gate Parts & Welding Company
Louisville homeowners call us for one reason that matters more than any brochure claim: we fix the gate in your driveway instead of hauling it off to a shop and returning three weeks later with an invoice. Hal has been at this since 2001, and he gets genuinely annoyed when he finds sloppy work somebody else left behind. The 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, we make it right. One call brings him back, no runaround.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. That matters to the kind of customer who has already been burned by a national outfit that quoted one price on the phone and charged another at the door. When you call our Gate Parts & Welding office, you talk to a person who knows Louisville, not a phone tree. Calls are answered by a live person 24 hours a day, seven days a week. Not a voicemail, not a chatbot.
Our Gate Parts & Welding Services in Louisville
We stock common gate parts for Louisville’s housing stock and we weld on site. Here’s what we handle most weeks.
Hinge Replacement in Louisville
Your gate sags in the hinge post, not in the middle, and that is where we start. On a 100-year-old property in the Highlands or Crescent Hill, the original hinges often weren’t bolted on. They were forge-welded into hand-laid brick pillars, and when they shear off or corrode through, you need a welder and a mason on the same job. Hinge replacement in Louisville typically runs $125-$260 per hinge, depending on whether we’re cutting out an embedded original or swapping a modern bolted hinge.
Post Replacement in Louisville
Freeze-thaw cycling in the Ohio River valley heaves post footings out of plumb faster than in cities with stable winters. We see it all over Louisville, from old brick pillars in the 40208 ZIP to steel posts in newer subdivisions near Okolona. A steel post replacement runs $200-$450 installed. When a brick pillar from the Victorian era fails, the job often includes repointing mortar around the hinge post, which we coordinate with a local mason we’ve worked beside for years.
Rail Repair and Custom Welding in Louisville
Uncoated wrought iron and steel rails on older Louisville gates rust from Ohio River summer humidity, usually at the rail-to-stile joints. That’s where weak welds and visible sag show up first. We cut out the rotted section, weld in new material matched to the original profile, and grind it smooth. Custom welding on ornamental gates in Louisville runs $90-$180 per hour plus materials. For cast iron, we’ll be honest with you about when brazing is the better call than welding.
Gate Rollers, Latches & Locks
A slide gate that sticks in a narrow Old Louisville alley is usually a failed roller or a worn rack and pinion, and the fix is a $40-$120 part plus labor. Latches and locks on older Louisville gates often wear at the strike plate, not the mechanism itself, which is a fifteen-minute adjustment when you know what you’re looking at. We carry replacements for most common latch styles in the truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Louisville
We service and stock parts for nine major gate operator brands, including FAAC, BFT, Linear, and Viking. If you have an older operator that stopped working on a Victorian-era swing gate, we’ll tell you honestly whether it can be retrofitted with a new control board and safety edges, or whether replacement is the cheaper answer over the next few years. We keep common control boards and photo eyes in stock so Louisville customers aren’t waiting on a freight shipment from a warehouse three states away.
Common Gate Parts & Welding Problems We See in Louisville Homes
- Freeze-thaw hinge failures. Louisville’s winter temperatures oscillate across the freezing point repeatedly, and that cycling heaves posts and cracks cast iron hinge hardware faster than in cities where it just gets cold and stays cold.
- Embedded original hinges in brick pillars. In Old Louisville and the surrounding preservation districts, original Victorian hinges were forge-welded into masonry. When they fail, the repair requires both welding and masonry work, which is a two-trade call that surprises out-of-town contractors.
- Rust at rail-to-stile joints. Ohio River summer humidity accelerates rust on uncoated iron and steel, and the joints where decorative rails meet the stiles are where weak welds and visible sag appear first.
- Worn rollers on narrow alley slide gates. Many Louisville properties in the urban core have narrow lot lines where a slide gate is the only option, and those rollers and rack systems wear faster when they’re the primary privacy barrier.
Pricing for Gate Parts & Welding in Louisville, KY
Here’s what you can expect to pay in Louisville. Hinge replacement runs $125-$260 per hinge. Steel post replacement runs $200-$450 installed, and brick pillar work adds masonry time at $75-$120 per hour. Custom welding runs $90-$180 per hour plus materials. Gate rollers and latch hardware run $40-$120 in parts plus roughly an hour of labor. We quote the price and agree on it before any work starts. Not an estimate that changes at the door. A fixed number on paper. We charge no trip fee inside Jefferson County, take $40 off any repair over $200, and offer a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a straight answer on your specific gate.
We Also Serve Cities Near Louisville
Besides our work across Louisville proper, we take calls in Buechel, Newburg, Saint Matthews, and Okolona. If you’re on the edge of the county and wondering whether we’ll come out, call us. Scheduling is coordinated from our Louisville office, and our crews serve the surrounding communities locally.
Serving Louisville, KY - Our Local Coverage Area
We’re based in the Louisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Louisville
Yes, we do this regularly. The key is cutting out the corroded original hinge carefully, welding a period-compatible replacement, and having a mason repoint the brick around the hinge post in the same visit. That’s the standard approach for Victorian gates where the hinge was forge-welded into a hand-laid pillar. Last week our welder was called to an 1890s wrought iron swing gate in Old Louisville where the lower hinge had snapped inside a hand-laid brick pillar. We cut out the corroded original, welded a period-compatible replacement, and called in a mason on the same job to repoint the brick around the hinge post, two trades, one afternoon, done right for a century-old gate. Call (877) 610-2993 and we’ll take a look at yours.
It depends on the control board and the age of the operator, but many older LiftMaster units can be retrofitted with a new board and updated safety edges rather than replaced outright. We service LiftMaster, FAAC, BFT, Linear, and Viking, and we’ll tell you plainly if a retrofit is worth the money or if a new operator will cost less over the next few years. There’s no charge for our evaluation, and you get a written price before any work starts. Call (877) 610-2993.
Almost always just a part, usually a hinge or a post. A gate sags in the hinge post, not in the middle, and fix the panel without the post and you’ll fix it twice. On a century-old Louisville property, the problem is typically the original hinge hardware or a post that freeze-thaw cycling has pushed out of plumb. We repair before we replace, and if replacement is genuinely cheaper, we’ll show you why in writing. Call (877) 610-2993 for a straight opinion.
Cast iron usually needs brazing, not standard welding, and yes, we do both. Brazing runs hotter on the base metal without melting the cast iron itself, which prevents cracking around the repair. It’s slower than welding mild steel, so the labor estimate reflects that, but it’s the right way to preserve an original finial on a Louisville estate gate. We’ll give you a fixed price before we touch it. Call (877) 610-2993.
Usually one or the other, and sometimes both. Grinding at the track typically means a failed roller bearing, while a jerky or slipping motion points to a worn rack and pinion. We diagnose it on site in about twenty minutes, and the parts run $40-$120 depending on the gate’s weight and the system. We carry common roller and rack replacements in the truck. Call (877) 610-2993 and we’ll come out.
Contact Gatewood Fence & Gate in Louisville
The name is on the shop, and the shop is down the road. If your gate needs a part, a weld, or an honest second opinion, call us today at (877) 610-2993. A live person answers, 24/7. Every job carries the 90-Day Done Right Promise in writing, and the price is agreed before we start. Not after.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Louisville since 2001.