Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lantana, TX
A gate that won’t close in Lantana isn’t something to put off. Salt air off the Lake Worth Lagoon gets into hinges, operators, and steel frames year-round, and by the time a gate starts dragging on the track, the corrosion has usually been working on it for months. We come out, figure out exactly what failed, and fix it on-site so you’re not waiting on a shop that’s three towns over. Call (877) 610-2993 and a live person picks up, 24 hours a day.
Why Lantana Homes Are Different
Lantana sits directly on the Lake Worth Lagoon, exposing virtually every property in this compact town to concentrated salt-air corrosion year-round - a far harsher environment than inland Palm Beach County cities just a few miles west. Gate motors, hinges, springs, and steel frames corrode and seize significantly faster here, making corrosion-rated hardware and marine-grade components a near-universal necessity rather than an upgrade.
The housing stock compounds the challenge. Lantana’s modest mid-century ranch homes and small bungalows built in the 1950s through 1970s often still run original or early-generation swing and slide gates, with posts that were never built to current wind-load standards. Palm Beach County’s strict post-Andrew ordinances require automated gate systems and their posts to meet specific lateral force ratings, a code detail that catches out-of-county technicians off guard. There are also several manufactured and mobile home communities in the 33462 ZIP where lightweight aluminum and chain-link gate systems need different repair approaches than masonry-pillar estate gates.
South Palm Beach County’s combination of intense UV, near-daily summer thunderstorms, and salt-laden humidity from the adjacent Intracoastal accelerates rust on ferrous components and degrades wiring insulation and circuit boards in automatic operators faster than manufacturers’ rated lifespans assume. Hurricane-season surge events can flood gate operator housings at low-lying waterfront lots along the lagoon. When we repair a gate in Lantana, we’re accounting for all of this from the first pull of the truck.
Gate Repair in Lantana
Most Lantana gate repairs land between $180 and $450, depending on what’s actually failed. Hinge and bracket repairs run lower; operator board replacements or post resets run higher. Every price is quoted and agreed before any work starts, so the invoice matches the number you heard on the phone. The standing no-hassle offers apply: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If another company gave you a written estimate, Hal will give you a free second opinion.
Electric Gate Repair
Electric gate problems in Lantana tend to follow the humidity. Circuit boards in operators mounted near the lagoon pick up condensation and corrosion, and that’s usually the culprit when a gate opens but won’t close, or closes halfway and reverses. We service gate motors from Linear, Viking, and Ghost Controls, and we carry boards and limit switches so we can often repair the operator in the driveway. Electric and automatic gate repairs run $225 to $475 for most board, loop, and limit switch work. If a board is fried beyond repair, we quote the replacement before ordering anything, and you approve the number up front.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Many of Lantana’s homes were built in the 1950s through the 1970s, and the original gate posts were set with whatever the builder had on the truck. Palm Beach County’s post-Andrew wind-load ordinances require automated gates and their posts to meet specific lateral force ratings, so when we rebuild a leaning post or replace rusted hinge barrel bolts, we do it to current spec. A hinge and post repair typically runs $185 to $340, depending on whether we’re welding the hinge or rebuilding the post. We weld on-site, which means we’re repairing the gate where it stands.
Gate Realignment
A gate that drags on the ground on Lantana’s shell-rock driveways has usually shifted at the post or worn down its hinge bearings. Sometimes the issue is the gate wheel, and sometimes it’s the entire frame flexing because steel has fatigued where the rail meets the stile. We realign the gate, shim the hinges, and if the frame has cracked, we weld it and add reinforcement so it stops leaning. Gate realignment work fits the $150 to $300 range. This is where a repair-first approach really matters: a gate that’s dragging can frequently be squared up and welded for far less than a full replacement.
For more detail on our repair process, visit our Gate Repair page.
How fast can you get to Lantana for a gate repair?
Most Lantana repairs happen same-day when you call before noon, and for a gate that won’t close or secure at all we treat it as an emergency and aim to have someone there within the hour. The phone is answered by a real person 24/7, so you’re not leaving a message and waiting for a callback. Call (877) 610-2993 and we’ll give you an honest arrival window before you hang up.
Do you repair heavy or rusted steel gates in Lantana?
Yes, and that’s most of what we do on the lagoon side of town. We weld steel in your driveway rather than hauling the gate off, and we replace rusted-through hinge assemblies with corrosion-rated hardware that holds up better to salt air. If the frame is rusted to the point of losing structural integrity, we’ll tell you straight and quote a replacement only if a repair won’t hold.
Gate Installation in Lantana
Gate installation in Lantana runs $1,200-$4,800 for a typical single driveway gate, and $3,500-$9,000 for a double swing or sliding setup with automation. We’re Gatewood Fence & Gate, and Hal Gatewood has been putting gates in the ground since 2001. If you live anywhere in Lantana’s 33462 ZIP, we can be at your property with a tape measure and straight answers. The price is quoted and agreed before any work starts - not an estimate that creeps up at the door, but a quote in writing with a number on it.
Swing Gate Installation
Swing gates are the most common gate type in Lantana’s 1950s and 1960s neighborhoods, and frankly, the most abused. The gate panel itself is usually fine. What fails is the hinge post, because it’s been soaking up salt-laden humidity and decades of stormwater at the base. We install swing gates on new posts, set to depth with concrete that meets current lateral force ratings, and we hang the gate so it closes true the day it goes in and every day after. A single swing gate with a basic operator runs $1,200-$2,800.
Sliding Gate Installation
Sliding gates make sense on Lantana lots where the driveway slopes toward the road or where a swing gate would eat the whole front yard. We handle cantilever and track-style slides, and we’re specific about what goes where. Near the Intracoastal, a track-style slide can clog with sand and salt spray faster than you’d believe, so we often steer Lantana homeowners toward cantilever systems that don’t ride a ground rail. A sliding gate, depending on track or cantilever style, runs $2,800-$7,000.
Security Gate Installation
A security gate in Lantana does two jobs: it keeps people out and it tells them you’re paying attention. We build security gates for mid-century ranch homes and mobile home communities in the 33462 ZIP, scaled to the property and the threat. You don’t need a prison yard. You need a gate that closes reliably, locks properly, and doesn’t telegraph weakness with a sagging panel or a hanging chain. Security gates with heavier steel and better hardware land in the $4,000-$9,000 range.
Learn more about our installation standards on our Gate Installation page.
My Lantana swing gate sags and scrapes the driveway - can you just replace the hinges?
The post is the problem in most Lantana swing gates we see. Hinges fail because the post moves or rots at the base, and the hinge then carries load it was never meant to carry. We can replace hinges on a sound post and buy you time, but if the post is rocking or rusted through at the ground line, new hinges on that post is money you’ll spend twice.
Will a standard gate operator survive the salt air on Lake Worth Lagoon?
No. A standard operator installed on a Lantana property within sight of the Intracoastal will typically start showing control board corrosion within five to seven years, and often sooner on low-lying lots where surge events push salt water into the housing. We recommend operators with sealed boards and corrosion-rated housings, and we seal the wiring entries so the salt-laden humidity isn’t circulating through the electronics.
Gate Motor & Opener in Lantana
When your gate motor fails in Lantana, you’re not just dealing with an inconvenience. You’re dealing with a security gap, a stuck vehicle, and in this town specifically, a piece of machinery that’s been fighting salt air since the day it was installed. We’ve been fixing gate motors and openers across the Lantana area long enough to know exactly how the Intracoastal’s salt-laden breeze eats through a control board faster than any manufacturer’s spec assumes.
Motor Installation
A new motor installation in Lantana should start with corrosion protection, not just a bracket bolted to a post. We spec marine-grade and corrosion-rated hardware because standard zinc-plated fasteners don’t survive more than a couple of hurricane seasons this close to the Intracoastal. We also verify the gate’s wind-load rating against current Palm Beach County code. A full motor replacement with installation typically runs $700 to $1,500 for a single residential swing or slide gate.
Motor Repair
Most motor repairs in Lantana come down to the same culprits: corroded control boards, failed capacitors, chewed-up limit switches, or wiring insulation that UV and salt have turned brittle. We fix the motor in your driveway rather than hauling it off. On-site repair means you see exactly what we’re replacing and why. A basic motor repair, like replacing a capacitor, a limit switch, or a corroded terminal connection, typically runs $180 to $340. If a capacitor is fine, we don’t touch it. If a gearbox is beyond saving, we’ll show you the wear and give you a price before any work starts.
Slide Motor Service
Slide gates are more common on Lantana’s larger lots and manufactured home communities where the gate travels along a track. Salt spray and sand from coastal breezes work their way into the drive chain, guide rollers, and motor housing. We service slide motors across the 33462 ZIP, paying particular attention to the gearbox seals and limit switch contacts. Swapping a failed control board runs $350 to $650 depending on the brand and whether we can source the board locally the same day. Leak checks aren’t a “nice to have” here. A motor housing that’s been underwater in a hurricane-season surge can look fine from the outside and be rusting from the inside.
See our full motor and opener capabilities on the Gate Motor & Opener page.
How fast can you get to Lantana for a gate motor emergency?
We send crews to Lantana the same day in most cases, and we prioritize emergency calls where a gate is stuck open or can’t close. A live person answers our phone 24/7 at (877) 610-2993, and we’ll tell you honestly when we can be there. If your gate is stuck closed and you need to get a vehicle out, we make that call a priority without padding the invoice for urgency.
What does a gate motor repair cost in Lantana compared to nearby cities?
Lantana pricing is in line with the rest of southern Palm Beach County, but because this town sits directly on the Intracoastal, corrosion repairs can be slightly more involved here than in inland areas. A basic repair typically runs $180 to $340. A motor replacement runs $700 to $1,500. Your exact quote is free, and the number you approve is the number you pay. Call (877) 610-2993 for an exact quote.
Gate Access Control in Lantana
Gate access control in Lantana means one thing more than any other: salt. This town sits right on the Lake Worth Lagoon, and that water puts corrosive salt air on every hinge, motor, and control board in the 33462 ZIP. A keypad or card reader that would run ten years inland might give you four here before corrosion starts eating connections. That’s the reality homeowners in Lantana deal with, and it’s why we approach access control differently here than we would in a drier climate.
Keypad Entry
Keypad entry in Lantana takes a beating from salt-laden humidity. The membrane buttons on older units crack and let moisture into the circuit board, which is why we see keypads that work fine until a heavy summer storm rolls through. We install sealed, weather-rated keypads and hardwire them properly so you’re not replacing them every other year. A typical keypad replacement in Lantana runs $180 to $420 depending on whether we’re reusing existing wiring or pulling new conductors through conduit. We quote that price before any work starts.
Phone Entry Systems
Phone entry systems let you buzz a visitor’s cell phone and talk to them before opening the gate. In Lantana, the weak point is almost always the cellular module or the SIM card slot corroding from salt air. We install phone entry systems with weather-sealed enclosures and mount them so they’re not sitting in direct sun all afternoon, which kills electronics faster than anything. A complete phone entry system for a Lantana gate runs $850 to $1,400 installed, including programming your phone lines or cellular bridge. That’s a fixed quote, not a starting point.
Card Reader Systems
Card readers are common for HOAs and multi-property access, but we also install them on single-family gates where the homeowner wants keypad-free entry. The big issue in Lantana is that proximity cards and readers don’t like salt spray, and cheap card readers fail within two seasons here. We install commercial-grade readers with sealed housings and back them with our 90-Day Done Right Promise. For Lantana’s manufactured home communities and smaller gated pockets, a single-card-reader setup typically runs $600 to $950 installed.
Explore access control options on our Gate Access Control page.
Why does my gate access keypad stop working after heavy rain in Lantana?
Heavy rain forces salt-laden moisture into unsealed keypad housings, and once that reaches the circuit board, the keypad fails intermittently or permanently. The fix is a sealed, weather-rated keypad with a gasketed enclosure, which we install regularly in Lantana’s 33462 ZIP. Call (877) 610-2993 for a free estimate on a replacement keypad.
Can I add a smart access system to my original 1970s slide gate operator?
Yes, in most cases. If your 1970s operator still runs, we can often integrate a smart access module that lets you open the gate from your phone, but it depends on the control board’s voltage and signal type. Some original boards are too primitive, and in those cases we retrofit a modern board first. Call (877) 610-2993 and we’ll tell you straight what your operator can handle.
Gate Parts & Welding in Lantana
Gate hardware on Lantana properties fails faster than almost anywhere else in Palm Beach County. Salt-laden air off the Lake Worth Lagoon works on hinges, posts, rollers, and control boards every single day. If your swing gate sags, your slide gate binds, or your operator opens and closes on its own, we can usually weld or retrofit the existing hardware in your driveway instead of replacing the whole system. Hal Gatewood has been doing it that way since 2001.
Hinge Replacement
Hinges are the first thing to go on a swing gate near the Intracoastal. We see original 1960s and 1970s hinges on Lantana homes that have rusted to the point where the gate drops a half inch every few months. We replace them with marine-grade stainless or galvanized hinges rated for salt exposure. The gate stays hung in place while Hal’s crew welds the new hinge barrels, so you are not waiting on a crane or a flatbed. A typical hinge replacement in Lantana runs $180-$380 per hinge.
Post Replacement
A gate sags in the hinge post, not in the middle. That is the first thing we check. On older Lantana ranch homes, the original posts were often set shallow and the concrete is cracked. Adding a stack of washers under the hinge does not fix it. We dig out the old footing, set a new galvanized post in a proper concrete base, and weld the hinge plates to match the original gate geometry. Post replacement in Lantana typically runs $400-$900 including the footing, the post, and the re-hang.
Custom Welding
Sometimes the best fix is not a replacement part, it is a custom weld. Cracked gate frames, broken picket attachments, a latch that was never right in the first place. Hal welds on site, in your driveway, with the gate still in its track or still on its hinges. That means you get the gate back the same day instead of waiting a week for a shop to “get to it.” Custom welding in Lantana runs $150-$500 for most repairs, and the price is quoted and agreed before strike is struck.
See more about our welding capabilities on the Gate Parts & Welding page.
Can you weld a rusted-out hinge on an old Lantana gate, or does the whole post need replacement?
If the rust is isolated to the hinge barrel and the post still has solid steel at the mounting point, we weld a new marine-grade hinge plate directly over the original, and the gate goes back on. If the post itself is rotted through at the base or the concrete footing is cracked, the whole post has to come out. About half of the Lantana hinge repairs we do end up needing post work too.
How do I know if my slide gate track has been damaged by salt-air corrosion?
Run your finger along the bottom rail and the track. Flaking rust, deep pitting, or a rail that has started to bow means the salt is winning. If the damage is limited to a section of rail or the track brackets, we cut out the bad steel and weld in new galvanized or stainless rail without touching the rest of the gate. Rail repair jobs in Lantana run $250-$650 depending on how much rail has to be replaced.
Brands We Service in Lantana
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Linear, Viking, and Ghost Controls locally, which means faster turnaround on repairs in the 33462 ZIP. If your operator is a brand we don’t carry parts for, we’ll tell you upfront and source what we need rather than guessing.
See our full brands coverage.
Pricing for Gate Repair in Lantana, TX
| Service | Typical range in Lantana |
|---|---|
| Hinge & post repair | $185 - $340 |
| Gate realignment | $150 - $300 |
| Electric/automatic gate repair | $225 - $475 |
| Full operator replacement | $750 - $1,200 |
| Single swing gate with operator | $1,200 - $2,800 |
| Double swing gate with automation | $3,500 - $6,500 |
| Sliding gate (track or cantilever) | $2,800 - $7,000 |
| Security gate installation | $4,000 - $9,000 |
| Basic motor repair | $180 - $340 |
| Control board replacement | $350 - $650 |
| Full motor replacement | $700 - $1,500 |
| Keypad entry replacement | $180 - $420 |
What pushes the price up in Lantana is almost always corrosion: a gate that sat near the water for a decade may need more hinge and frame work than a similar gate ten miles inland. The price we quote is the price you pay, and we write it down before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Lantana
We work across Lantana, from the canal-side streets along the lagoon to the older ranch-home blocks east of I-95 and the manufactured home communities throughout 33462. Typical response time in the area is same day when you call before noon.
- Waterfront lots along the Lake Worth Lagoon
- Mid-century ranch neighborhoods off Lantana Road
- Manufactured and mobile home communities in 33462
- Gated communities near Hypoluxo Road
- Older bungalow blocks east of I-95
Service Area - Cities Near Lantana
We serve Lantana and the surrounding communities without a trip charge inside the county. Our crews also work regularly in Flower Mound, TX, Highland Village, TX, Corinth, TX, Trophy Club, TX, and Denton, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Lantana, TX locally.
Serving Lantana, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lantana and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Lantana coverage area; if your address is on it, we can help.
Also serving nearby: Lantana, TX, Flower Mound, TX, Highland Village, TX, Corinth, TX, Trophy Club, TX, Denton, TX.
FAQs About Gate Repair in Lantana
In most cases, replacing an operator on an existing gate doesn’t require a permit in Lantana. But if we’re replacing posts, changing the gate footprint, or bringing a pre-1990 installation up to current wind-load code, Palm Beach County may want a permit and an inspection. We’ll tell you honestly what your job needs before we start, and we handle the paperwork on our end.
Yes. We’re state-licensed, insured, and bonded, and our credentials are on every invoice. Hal Gatewood’s name is on the shop and on the paperwork, which means there’s a real person standing behind the work. Every repair carries a written 90-Day Done Right Promise: if it’s not done right, one call brings him back.
Yes. We work throughout the 33462 ZIP, including the manufactured and mobile home communities close to the lagoon. Lightweight aluminum and chain-link gate systems there need different repair approaches than the masonry-pillar estate gates elsewhere in Lantana, and we stock parts for both. If you’re not sure whether your gate is worth repairing or should be replaced, we’ll give you a straight answer, not a sales pitch. Call (877) 610-2993 for a free estimate.
Call (877) 610-2993 for a free estimate. A live person answers 24 hours a day, and Hal Gatewood schedules the visit himself. The price we quote is the price you pay, and every job carries our 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lantana Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks