Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Highland Park
Gate parts and welding in Highland Park usually means one of two things: a heavy ornamental gate that has sagged at the hinge post, or a weld that snapped on decades-old ironwork. Either way, the fix needs to match the house, pass the town’s deed restrictions, and hold up to Blackland Prairie clay. We handle all three. If your gate is binding, dragging, or showing a cracked weld, call (877) 610-2993 and we will send someone who welds on site, at your driveway, not back at some shop across the metroplex.
We stock period-correct hinge straps, latch faceplates, and forged scroll profiles for Highland Park estate gates, because a shiny catalog hinge on a 1930s Tudor gate is not a repair. It is a notice to your neighbors and the town inspector. Hal Gatewood started this company in 2001, and the reason we still do Gate Parts & Welding the old way is simple: the gate you have is usually better than anything you could order to replace it.
Why Gatewood Fence & Gate Is Highland Park’s Preferred Gate Parts & Welding Company
Highland Park homeowners have a specific problem. Their gates were built by hand between the 1920s and 1950s, and the hardware no longer exists in catalogs. Most gate companies will measure it, order a generic replacement, then tell you the old gate needs to be “upgraded” or replaced outright. We do not work that way. Hal’s crews weld on site, fabricate matching hardware, and stand behind every job with the 90-Day Done Right Promise in writing. If it is not right, one call brings him back.
Our Highland Park customers tell us the same thing repeatedly: another company quoted a phone number, then changed it at the door. That is exactly the kind of behavior that makes Hal angry. Upfront pricing here means the price is quoted and agreed before any work starts. You will not open an invoice and find a surprise. And when you call (877) 610-2993, a live person answers. Not a voicemail, not a call center. Someone who knows Highland Park gates.
We work in ZIP code 75205 nearly every week. We know the lots around Armstrong Parkway, the long drives off Preston Road, the gated courtyards near the Dallas Country Club. We know that the soil under those gates moves more than the gates themselves do. That local knowledge is not a marketing line. It is the difference between fixing a gate once and fixing it three times.
Our Gate Parts & Welding Services in Highland Park
Hinge Replacement
A sagging gate fails at the hinge post, not in the middle. On Highland Park’s swing gates, the original hand-forged hinges are often rusted through where they meet the post, while the gate leaf itself is still sound. We fabricate replacement hinge straps to match the existing profile and finish, then weld them in place with the gate still hanging. This is the repair that separates a parts swapper from a welder. In this market, hinge replacement typically runs $280-$650 per leaf depending on the hardware and finish matching required.
Post Replacement
Blackland Prairie clay swells in spring and contracts in August. Your gate post moves with it. When a post has heaved enough that the leaf drags or the opener binds, the fix is not another shim. It is pulling the post, pouring a footing to modern depth, and setting a replacement that will not move again for decades. On Highland Park properties, post replacement often involves matching the original cap detail and footing depth under existing hardscape. Work like this generally runs $900-$2,300 depending on access, post size, and whether the operator must be removed and reset.
Rail Repair
Slide gates are less common in Highland Park than big swing gates, but they show up on mid-century ranches along streets like Mockingbird Lane. When the original rail was never reinforced for an automated operator, the rollers tear out the rail’s bottom flange. We weld in new rail stock, realign the rack and pinion if one is present, and set the rollers so the gate runs without chattering. Typical rail repair in Highland Park runs $400-$900 before parts.
Custom Welding
This is the work that defines us. Cracked scrollwork, broken spear points, a finial snapped off by an ice storm, a hinge strap that no longer exists anywhere. We fabricate replacements on site or at the shop, then match the patina so the weld disappears. On a deed-restricted street in Highland Park, that matters. The town’s inspectors will flag a mismatched finish, and your neighbors will notice before the inspector does. Custom welding work like this typically starts around $250 and goes up based on the complexity of the piece and the finish work required.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
Most automated gates in Highland Park run on operators that were retrofitted onto manual gates decades ago. We service and stock parts for the common brands on those retrofits: Linear underground operators on long estate drives, Viking swing arms on courtyard gates, DoorKing slide operators on service alleys, and Ghost Controls on newer installs where owners wanted a quieter retrofit. The point is not the brand. The point is that we calibrate the operator to the actual weight and hinge geometry of a hand-forged gate, not to a spec sheet. If the gate is fighting the operator, we fix the gate first, then the operator.
Common Gate Parts & Welding Problems We See in Highland Park Homes
- Clay soil heave shifts hinge posts seasonally. A gate that binds in May may scrape the driveway by August. The fix starts at the post footing, not the operator arm.
- Retrofit automation on 1920s-1950s hand-forged gates creates mismatched hinge geometry. The original hinges were never designed for a motor. We rework or replace them so the operator is not fighting 200 pounds of iron every cycle.
- Rack-and-pinion slide gates tear out rollers when the original rail was not reinforced. The operator keeps pushing after the gate binds, and the rail flange is what gives. We weld in reinforced stock and reset the rack.
- Ice-storm freeze cracks ornamental iron scrollwork and seizes latch internals. Every few winters, a Dallas ice storm leaves half of Highland Park with snapped scrollwork and frozen entry latches. Cold-weather welding repairs and post-footing replacements spike together in early spring.
Pricing for Gate Parts & Welding in Highland Park, TX
Here are real numbers from actual jobs in Highland Park, not national averages. Hinge replacement runs $280-$650 per leaf. Post replacement runs $900-$2,300 depending on footing depth, access, and operator reset. Rail repair runs $400-$900. Custom welding starts around $250 for a single scroll or spear point and goes up from there based on the fabrication and finish work. A full bespoke hinge-and-latch match on a 1930s driveway gate might land in the $1,500-$3,000 range when multiple parts must be hand-forged and patina-matched.
What changes the price most is finish matching. A raw welded repair the inspector will flag is cheaper today and expensive in the long run. Our price is quoted and agreed before any work starts. You will know the number before we strike an arc. Estimates are free. Call (877) 610-2993.
We Also Serve Cities Near Highland Park
Gatewood Fence & Gate covers Highland Park and the surrounding communities, including University Park, Dallas, Richardson, and Irving. Dispatch and scheduling for these jobs are coordinated from our Dallas-Fort Worth office, with crews that serve Highland Park locally. If you’re one town over and your gate has decided to quit, call the same number: (877) 610-2993.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Highland Park
In most cases, no. Highland Park’s building department generally treats hinge replacement and weld repairs as routine maintenance, not structural work requiring a permit. However, the town does enforce its deed restrictions on visible hardware, which means the replacement hinge or welded scroll must visually match the original ornamental ironwork. We keep period-correct finishes on hand for exactly this reason. If your project involves moving a post or changing the gate’s footprint, that may require approval, and we will tell you before we start. Call (877) 610-2993 and we will walk you through what applies to your gate.
Yes. This is exactly the kind of work we do most often in Highland Park. We grind the weld to match the surrounding profile, then patinate the new metal to blend with decades of existing finish. On a gate that has weathered naturally since the Depression, you cannot just spray paint a welded seam and walk away. Hal has been doing this since 2001 and keeps the patina recipes on the truck. If you want to see what a matched repair looks like before we start, ask when you call (877) 610-2993.
Almost always a footing problem. Highland Park sits on Blackland Prairie clay, which swells dramatically after spring rains and contracts in summer drought. If your post was set at a shallow depth decades ago, the clay will move it every year no matter how many times you weld the gate back into alignment. The permanent fix is to pull the post, pour a new footing to modern depth, and reset the hardware. We did exactly this on a Georgian Colonial estate on Beverly Drive where a 1950s post had heaved so badly the gate leaf was scraping the operator path. The new footing stopped the movement. Call (877) 610-2993 for a free assessment.
You check the reveal. On a properly hung Highland Park swing gate, the gap between the gate leaf and the post should be consistent from top to bottom. If the gap is wider at the top and tight at the bottom, or vice versa, the hinge post has moved or the hinge straps have worn. If the leaf itself is straight and the welds are intact, the problem is at the post. Twelve times out of ten, that is where we start. You can also check the latch side: if the latch no longer lines up but the leaf is not bent, something under the hinges moved. Estimates are free. Call (877) 610-2993.
Yes. Safety photocells are required on automated gates regardless of when the operator was installed, and Highland Park’s own inspectors will flag a gate without them. If your 1980s or 1990s retrofit is running without working photocells, or if the cells are original and the lenses are cracked or clouded, the gate is a safety hazard. We replace them during any operator or hinge repair. This is not optional equipment. If your gate closes on the driveway without stopping for an obstacle, call (877) 610-2993 before someone gets hurt.
Hinge replacement in Highland Park typically runs $280-$650 per leaf, which is roughly $50-$150 higher than the same repair in Irving or Richardson. The difference is the finish work. Highland Park’s deed restrictions require replacement hardware to visually match the original ornamental ironwork, so the job includes patina matching and profile fabrication that a standard catalog hinge swap elsewhere does not. Call (877) 610-2993 for an exact quote on your gate. Estimates are free, and the price is agreed before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park since 2001.