Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Glendale
If you have a sagging ornamental iron gate in Glendale, the problem is almost never the panel itself. It’s the hinge post, the weld points, or the rollers underneath that have quietly failed. Our Gate Parts & Welding team fixes those things on site, in your driveway, without hauling your gate off to a shop. We cover every corner of Glendale, from the 1920s Spanish Colonials in 91205 down to the hillside estates in 91207 and 91208, and we answer the phone live. Call (877) 610-2993 and you’ll talk to a real person who can tell you what a hinge replacement should cost before we ever put a truck on the road.
Why Gatewood Fence & Gate Is Glendale’s Preferred Gate Parts & Welding Company
Glendale has more heavy ornamental gates per street than almost anywhere in Los Angeles County. That’s not a guess. It’s what we see every single week when we drive through the Verdugo Woodlands, Chevy Chase Canyon, and the flatland neighborhoods between Glenoaks and the 134. And it means the person working on your gate has to understand what a 1,100-lb wrought-iron panel with decorative scrollwork does to a hinge post over ten years. We do. Hal Gatewood has been providing Gate Installation in Glendale and welding and repairing gates since 2001, and he still shows up on jobs himself.
Glendale homeowners call us because the estimate we give is the price we charge. Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround. We’re locally owned and owner-operated, with a published address and license number anyone can look up. The person who shows up at your gate is background-checked and uniformed, and the name on the invoice is Hal’s.
Our Gate Parts & Welding Services in Glendale
Hinge Replacement
Glendale’s heavy decorative gates eat hinges the way coastal salt air eats paint. We cut out the old barrel hinges, weld in heavier-grade steel units, and re-hang the gate so it swings true. The hillside homes in 91207 and 91208 tend to need this every five to seven years, not because the hinges were cheap, but because the gate weight plus the slope strain is relentless. A hinge replacement in Glendale typically runs $280-$650 depending on gate weight and how many hinges need replacing.
Post Replacement
The most common repeat repair we correct in Glendale is a post that was replaced without accounting for the gate’s decorative weight and the Verdugo foothill wind load. A gate sags in the hinge post, not in the middle, and that is where we start. We cut away the old footing, pour a deeper reinforced anchor, and set the post so it holds true through Santa Ana season. Post replacement in Glendale generally runs $750-$1,900, depending on post size, access, and whether the old footing comes out clean or needs to be jackhammered.
Rail Repair
Slide gates on Glendale’s sloped driveways put enormous stress on the bottom rail. When rollers bind or the rail bows, the gate starts to grind and eventually stalls the operator. We straighten, reinforce, and refinish rails in place, or replace the damaged section with new steel if the metal is too fatigued. Rail repair in Glendale typically runs $350-$800, including adjusting the rollers and re-setting the track alignment.
Custom Welding
We don’t just patch. We fabricate and weld replacement sections that match your gate’s existing profile, whether it’s a broken scroll on a 1930s Spanish Colonial gate in Rossmoyne or a cracked finial on a newer custom iron piece up in Adams Hill. On-site welding keeps the gate in your driveway, so you watch the repair happen and we don’t have to disconnect your opener or leave your property unsecured overnight. Custom welding work in Glendale ranges from $150 for a small crack repair to $1,200+ for multi-point fabrication on a large decorative panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glendale
We’re certified to service nine major gate brands, and on Glendale Gate Motor & Opener jobs we see a lot of DoorKing and Viking operators on the commercial-rated side, plus Ghost Controls and Elite on residential retrofits. The hillside homes in 91207 and 91208 frequently come to us with an FAAC or BFT unit that was never sized correctly for the gate. We stock common parts locally for Glendale customers, which means we can often turn around a parts replacement in one visit instead of waiting on a distributor shipment.
Common Gate Parts & Welding Problems We See in Glendale Homes
- Undersized slide operators on heavy decorative gates. In the Verdugo Woodlands and Chevy Chase Canyon, residential gate operators are routinely spec’d for 400 lb panels but paired with 800-1,200 lb decorative iron gates on sloped driveways. The motor burns out within two to three years. We upgrade to commercial-rated units on a residential permit.
- Cracked masonry pillars on 1920s-1940s Spanish Colonial homes. The original pillars in Glendale’s flatland neighborhoods were never engineered for automated swing gate torque. When a retrofit operator throws a 600-lb gate against the stop, the pillar cracks. We reinforce anchor points before we mount anything.
- Santa Ana wind damage every October and November. Glendale sits at the base of the Verdugo Mountains, and the fall wind events funnel straight through the canyons. Latch-worn gates get slammed hard enough to bend frames and strip hinges. We see the surge every year, and we stock the common parts ahead of it.
- Fire code compliance gaps on hillside gates. In the WUI zones of 91207 and 91208, automated gates are required to include Knox Box or emergency-release bypass mechanisms. Nearly half the hillside gates we’re called to service were installed without them. We bring it up on every repair because fire evacuation access is not a paperwork detail.
Pricing for Gate Parts & Welding in Glendale, CA
Here’s what Glendale homeowners can expect to pay, based on the work we do most often in this market.
- Hinge replacement: $280-$650
- Post replacement: $750-$1,900
- Rail repair: $350-$800
- Custom welding (small crack to multi-point fabrication): $150-$1,200+
- Slide operator upgrade (commercial-rated, parts and labor): $1,800-$3,400
- Knox Box / emergency-release retrofit: $400-$900
These are Glendale market ranges, not vague “it depends” answers. The exact price on your gate comes down to weight, access, and the condition of what’s already in the ground. We quote the price before any work starts, in writing, and it does not change at the door. Seniors and veterans get a permanent 10% discount. Any repair over $200 gets $40 off. And there’s no trip charge for a Glendale address inside the county. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Glendale
While this page is built for Gate Parts & Welding in Glendale, our crews also run jobs in Burbank, La Cañada Flintridge, Echo Park, and Silver Lake. If you’re on the edge of Glendale or just over the border, the same pricing and the same 90-Day Done Right Promise apply. Call us and we’ll tell you straight whether we can get there today.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Glendale
Because it was undersized for the gate. In the Verdugo Woodlands and Chevy Chase Canyon areas of 91207 and 91208, we routinely find residential operators spec’d for 400 lb panels attached to decorative iron gates weighing 800 to 1,200 lbs. The driveway slope adds effective load on every open cycle, and the motor gives out within two to three years. The fix is a commercial-rated operator sized to the actual gate weight and driveway grade. Call (877) 610-2993 and we’ll tell you what’s on your gate now and what it actually needs.
Yes. Hillside homes in the Wildland Urban Interface zones of 91207 and 91208 are required to have Knox Box key access or an emergency-release bypass on automated gates, so fire crews can get through during an evacuation. Welding work and operator upgrades need to respect that compliance. We check for it on every hillside job in Glendale and can retrofit the bypass if yours is missing. Call (877) 610-2993 for a free compliance check when we’re already out for another repair.
We can, and we do it on site. The key is grinding the break clean, using the right filler rod for the existing metal, and keeping the heat affected zone small so the surrounding frame doesn’t lose temper. Glendale’s older ornamental gates are often true wrought iron, which welds differently than the mild steel used on newer gates. We match the material before we strike an arc. Repair welding on a single scroll or finial in Glendale typically runs $150-$300.
Almost always the hinge post, not the panel. Fix the panel without the post and you’ll fix it twice. We see this constantly in Glendale’s flatland Spanish Colonial neighborhoods, where the original 1920s-1940s masonry pillars were never built to carry a 600-lb automated swing gate. We pull the old post footing, pour a deeper reinforced anchor, and re-hang the gate on new heavyweight hinges. Post replacement in Glendale runs $750-$1,900, which is a fraction of what a new custom gate would cost.
Entrapment protection and Gate Access Control - Glendale standards require that any automated gate’s safety systems function properly, and welding work that changes the gate’s weight or swing path can affect it. The two things to verify are the safety edges or photo eyes at the open and close positions, and the operator’s force sensitivity setting, which needs to be re-tested after any weld repair that adds or removes metal. We test both on every Glendale job before we leave the driveway. If your gate gets welded by someone else, call (877) 610-2993 and we’ll run a free safety check the next time we’re in your neighborhood.
Call Gatewood Fence & Gate for Gate Parts & Welding in Glendale
If your gate is sagging, grinding, or won’t close clean, don’t gamble on a phone quote that changes at the door. Hal Gatewood has been fixing gates since 2001, and the name is on the shop. We’ll give you a written price before we start, weld the repair on site so your gate never leaves your driveway, and stand behind it with a 90-Day Done Right Promise. Call (877) 610-2993 now for a free estimate. A live person answers around the clock, not a voicemail and not a call center three states away.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glendale since 2001.