Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Westmont, CA
We fix all three, usually in a single visit. Our crew knows the 90047 ZIP well, from the bungalow courts off Vermont Avenue to the ficus-lined streets near Centinela. Call (877) 610-2993 and a live person will pick up, day or night.
Why Westmont Homes Are Different
Westmont is an unincorporated LA County community, not a City of LA municipality. That means automated gate permits and inspections run through the LA County Building and Safety department rather than any city hall, a distinction that routinely catches outside contractors off guard and delays jobs. We’ve handled enough of these to know the county’s checklist by heart.
The housing stock here is predominantly 1940s-1960s single-family bungalows on narrow lots with concrete driveways that have had decades to settle, heave, and crack. Many properties added wrought iron perimeter fencing and low-voltage electric slide gates in the 1980s and early 1990s as a security response, meaning much of that hardware is now 30-40 years old and aging into mass failure.
Westmont sits roughly 8-10 miles inland from the Pacific, close enough that overnight marine layer deposits salt-laden moisture on exposed metal, steadily accelerating rust and pitting. Summer daytime highs regularly push into the low-to-mid 90s°F, creating repeated thermal expansion cycles that warp gate frames and stress weld joints. And those mature ficus and magnolia trees common throughout South LA send aggressive surface roots under driveway aprons, lifting and cracking the slab that the slide gate’s bottom track is anchored to. Track realignment or full track reset is one of the most repeated gate calls we take in the 90047 ZIP.
Gate Repair in Westmont
Gate repair in Westmont typically costs $145 to $450 depending on whether we’re adjusting hinges, resetting a track, or replacing a rotted post. Most repairs are done in one visit, and we carry common parts for Linear, Viking, DoorKing, and Ghost Controls operators on the truck. The person who answers your call at (877) 610-2993 can tell you honestly when Hal or his crew can be there.
Electric Gate Repair
Most electric gates in Westmont were installed as security upgrades in the 1980s and early 1990s, and the wiring is often original. We test the full circuit, from the breaker to the motor to the keypad, before replacing anything. A typical electric gate repair in Westmont runs $190 to $340, depending on whether we’re changing a capacitor, rewiring a junction box, or replacing a control board. If your gate reverses on its own or stops mid-travel, call before the limit switch burns out completely, that repair is cheaper than motor replacement.
Hinge and Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Westmont’s older bungalows often have hinge posts set directly into concrete that has cracked and tilted over 50 years. We repair or replace the post, then hang the gate so it swings level with no drag. Expect to pay $225 to $450 for a post repair on a wrought iron driveway gate, including realignment. We’ve fixed posts on homes near Westmont Avenue where the footing had turned to gravel and the homeowner didn’t realize it until the leaf was dragging.
Track Realignment and Weld Repair
Slide gates in Westmont drift off track for one dominant reason: concrete driveway aprons lifted by ficus and magnolia roots. When the slab under the track moves half an inch, the wheels bind and the motor strains. We realign the gate and, when required, reset or shim the bottom track without tearing out your whole driveway. A track reset in Westmont usually runs $175 to $300, with the gate rebalanced before we leave. For wrought iron weld repair on a cracked joint, we charge $95 to $180, grinding clean and welding on site so the gate never leaves your driveway. Gate Repair is what we’ve built this business on since 2001.
How fast can you get to a gate repair in Westmont?
Most non-emergency repairs in Westmont are scheduled within 24 to 48 hours, and we often have same-day slots for hinge failures or gates stuck open. Emergency calls are answered live at (877) 610-2993, and we’ll tell you honestly when Hal can be there. A live person answers the phone all day, every day.
Does your warranty apply to repairs done in Westmont?
Every repair in Westmont carries the same 90-Day Done Right Promise: if it’s not done right, Hal makes it right, in writing, no fine print. The promise is stamped on your invoice, not buried in a terms page. If something shifts or fails within 90 days, one call brings him back.
Gate Installation in Westmont
A new gate in Westmont usually runs between $1,400 and $6,200 installed, depending on whether you’re replacing a 30-year-old wrought iron driveway slide gate or adding a simple pedestrian gate off a side yard. Most installations take one to three days once the concrete work is done, and we quote a fixed number before the first tool comes off the truck. Hal will walk the job himself, tape measure in hand, because the quote depends on what your slab, posts, and property line actually look like.
Driveway Gate Installation
Most driveway gates we install in Westmont are sliding gates, and that’s a direct result of the lot layout. These are 50-foot-wide lots with driveway aprons right up against the property line, so there’s no room to swing a big leaf out over the sidewalk. A slide gate keeps the full driveway usable. We build the frame to the actual slab, not the slab as it was poured in 1955, because around Western Avenue and down toward Imperial Highway, root lift from mature ficus trees has changed the grade. A sliding driveway gate with a new track and a current-generation operator typically lands between $3,400 and $6,200.
Pedestrian Gate Installation
Side yard pedestrian gates in Westmont are often the second gate on the property, the one that gets used 20 times a day and never gets serviced until the latch gives out. We hang these with a real post set in concrete, not a surface mount lagged into stucco, because the marine layer moisture that rolls in overnight will rust a surface-mounted bracket within a few years. A standard single-leaf pedestrian gate in Westmont runs $1,200 to $2,800 installed, depending on whether we’re setting new posts or reusing existing ones.
Swing Gate Installation
Double swing gates are a Westmont classic, especially the wrought iron pairs that went in during the 1980s as security upgrades. The failure point is almost always the hinge post. A sagging leaf usually means the post itself leaned, not that the panel bent. We set hinge posts in deep concrete with rebar, and we choose pivot hinges that carry the weight through the post, not through the face screws. A double swing driveway gate in wrought iron or steel runs $2,800 to $5,500, with the wide range driven by gate width, steel gauge, and whether we reuse the existing hinge posts or set new ones. Gate Installation quotes are free and fixed before work starts.
Do you handle LA County permits for gate installation in Westmont?
Yes. Westmont is unincorporated LA County, so permits and inspections run through LA County Building and Safety rather than a city hall. We prepare the paperwork and schedule the inspection, including the operator safety compliance check that slide and swing gate automation requires.
What does a full gate installation include?
A full installation includes the gate itself, posts set in concrete if needed, track or hinges, the operator if it’s automated, safety edges and photo eyes, and final adjustment. We also handle the low-voltage power run from your panel to the operator, which is a step some gate companies leave to an electrician you have to find on your own.
Gate Motor & Opener in Westmont
If your automatic gate won’t open at 6 a.m. on a workday, you need someone who knows Westmont’s streets well enough to be there quickly. Gate motor and opener repair in Westmont typically runs $250 to $650, and a full replacement with track alignment lands between $1,800 and $4,000. We answer the phone live 24/7 at (877) 610-2993, and the person who picks up actually works in this area weekly.
Motor Repair
Motor repair is where Westmont keeps us busiest. The 1980s and 1990s security gates scattered through the neighborhood are now 30 to 40 years old, and their operators are failing consistently. A typical motor repair in Westmont runs $250 to $650, depending on whether it’s a capacitor, control board, limit switch, or gearbox. Hal fixes what’s fixable rather than automatically swapping in a whole new unit. We’ve rebuilt operators that other companies insisted on replacing, and the customer saved hundreds.
Linear Motor Service
Linear motors and linear-style operators are common on Westmont’s slide gates, particularly the wrought iron driveway gates that went in thirty-plus years ago. The motor itself may still spin, but the rack and pinion underneath has often deteriorated from salt-laden moisture and decades of concrete heave. Linear motor repair in Westmont typically starts around $350 and goes up to $900 if the rack needs welding or replacement. We weld on site, in your driveway, so the gate never has to be hauled away.
Motor Installation and Upgrade
A new gate motor in Westmont typically runs $1,500 to $3,800, including the operator, mounting hardware, and labor. Homes in the 90047 ZIP are mostly 1940s to 1960s bungalows, which means the gate posts themselves are often original to the property and may need reinforcement before a new motor bolts on. We always quote the full number upfront, in writing, before any work starts. That quoted price is the price. Nothing gets added at the door. Gate Motor & Opener service is what we do most days in this ZIP code.
Why does my Westmont slide gate keep jumping off track after a motor repair?
The motor is the easy part. In Westmont, the real culprit is almost always the concrete slab underneath the track. Fifty to eighty years of settling, plus ficus and magnolia roots pressing up from below, has shifted the surface so the bottom track is no longer true. When the track is out of alignment, the rack and pinion skip, the gate wheels bind, and the motor gets blamed. We fix the slab, then the motor, so you’re not paying twice.
Can we add a battery backup to an existing gate opener in the 90047 ZIP?
In most cases, yes. We add battery backup to existing openers from Linear, Viking, DoorKing, and most other major brands. It costs $400 to $1,100 in Westmont, and it means your gate opens and closes when the power’s out. On a 1990s slide gate off West 104th Street, our crew replaced the original FAAC operator with a modern unit, welded a new rack section, and wired a battery backup so the homeowner wasn’t trapped during the next outage.
Gate Access Control in Westmont
If your gate keypad in Westmont has gone dead or your driveway remote stopped talking to the operator at the worst possible moment, you need a straight answer, not a lecture. Gate access control repair in Westmont typically runs $180 to $420 for keypad and receiver work, and we can usually have someone at your house the same day you call. The person who answers at (877) 610-2993 is the person who schedules the work, not a voicemail system.
Keypad and Remote Repair
A dead keypad on a Westmont gate is usually either water intrusion or a worn ribbon cable, and both are repairable. We service keypads from Linear, FAAC, and most major brands, and we can usually get your existing keypad working rather than selling you a full replacement. If the keypad does need replacing, a new one in Westmont typically runs $180 to $340 including the part and labor. When your remote stops opening the gate from the street, the problem is often in the receiver rather than the remote itself. Remote control receiver repair or replacement runs $150 to $300.
Phone Entry and Card Reader Systems
Phone entry systems let you buzz open the gate from inside the house or from a cell phone, and they’re common on Westmont homes where the driveway is long enough that walking out to a keypad isn’t practical. These systems depend on a clean connection between the phone line or cellular module and the operator. We trace that connection end to end so we’re fixing the actual failure point, not guessing. Phone entry system repair averages $200 to $420 depending on whether we’re fixing wiring or replacing the entry module. Card reader installation starts around $250 and goes up based on the hardware you choose and what your operator can support. Gate Access Control systems are something we frequently add to driveway gates where the homeowner wants keypad entry for family and a separate code for everyone else.
How fast can you get to a Westmont home for gate access control repair?
We can usually reach Westmont homes the same day you call, often within a few hours for emergency situations where the gate won’t open and you can’t get your car out. Call (877) 610-2993 and a live person will tell you when we can be there. On weekends and nights, we don’t route to voicemail and hope for the best; someone answers.
Is gate access control repair cheaper in Westmont than in nearby cities?
Not really. Westmont pricing runs about the same as Inglewood, Lennox, and West Athens because we charge the same labor rate across the county and only the parts differ. What changes the cost is the age of your system and whether we can repair what’s there or need to replace a component. A keypad replacement in Westmont typically runs $180 to $340. Call (877) 610-2993 for an exact quote; estimates are free.
Gate Parts & Welding in Westmont
We fix all three on site, in your driveway, without hauling your gate to some shop across the county. Hal carries stick, MIG, and TIG gear on the truck, and he’ll fabricate brackets, splice panels, rebuild latch mounts, or stitch a cracked frame section so it’s stronger than the original.
Post and Hinge Replacement
This is the safety issue most Westmont homeowners don’t see until the gate’s already leaning. The post takes the entire load of the panel, every cycle, for decades. On 1940s-1960s bungalows where the original post was set in concrete that’s now 60 to 80 years old, the footing cracks, water gets in, and the post rots from the inside. We cut the old post at grade, excavate the old footing, set a new galvanized or powder-coated post in fresh concrete, and weld or bolt the gate back on square. Post replacement with a new footing runs $450 to $850. For hinge replacement, we remove the old hinge, grind the post clean, and weld on heavy-duty replacement hinges rated for the panel’s actual weight. Typical hinge replacement runs $180 to $350 per hinge, welded and adjusted.
Rail Repair and Custom Welding
Mature ficus and magnolia trees line plenty of Westmont streets. Those roots don’t care about your slide gate. They push up under the driveway apron, the slab lifts and cracks, and suddenly the bottom rail of your gate is dragging across concrete and the rack and pinion is out of alignment. We can often weld or reinforce a bent rail, reset the track, and realign the opener without replacing the whole gate. Rail repair and track realignment around the 90047 ZIP typically sits in the $275 to $600 range, depending on how far the slab has moved. For custom welding on small crack repair, bracket fabrication, or latch mount rebuilds, most jobs run $150 to $500. Gate Parts & Welding is where we started, and it’s still the core of what we do.
Do I need an LA County permit to replace the hinge post on my automatic driveway gate in Westmont?
Usually yes, because Westmont is unincorporated LA County and your automatic gate falls under LA County Building and Safety, not a City of LA permit office. A post replacement on an automated gate typically requires the county’s checklist to be followed, and we handle the paperwork and inspection coordination for you. We know what the county wants before we start, so the job doesn’t stall halfway through.
My wrought iron gate is rusted at the hinges but the rest looks fine-can you weld just that section?
Yes, in most cases we can. If the pitting hasn’t eaten through the post or the frame stub, we grind the rust back to clean steel, weld on a new heavy-duty hinge, and coat the area to slow the salt air from getting back in. If the surrounding metal’s too thin to hold a weld, we’ll tell you that too, and we’ll show you the section before we do anything.
Brands We Service in Westmont
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common Linear, Viking, and DoorKing parts locally, which keeps turnaround faster than shops ordering piecemeal. Most repairs that need a part we don’t have on the truck can be sourced within 24 hours through our Los Angeles office. our brands
Pricing for Gate Repair in Westmont, CA
| Service | Typical range in Westmont |
|---|---|
| Hinge adjustment or minor realignment | $145 - $225 |
| Slide gate track reset or shim | $175 - $300 |
| Electric opener control board replacement | $240 - $390 |
| Wrought iron weld repair (per cracked joint) | $95 - $180 |
| Complete hinge post replacement and re-hang | $225 - $450 |
| Electric gate repair (capacitor, wiring, board) | $190 - $340 |
| Single-leaf pedestrian gate installation | $1,200 - $2,800 |
| Double swing driveway gate installation | $2,800 - $5,500 |
| Sliding driveway gate with operator | $3,400 - $6,200 |
| Motor repair (capacitor, switch, gearbox) | $250 - $650 |
| Linear motor repair with rack work | $350 - $900 |
| Full slide motor replacement with alignment | $1,800 - $4,000 |
What pushes price up in Westmont is almost always the condition of the concrete under the gate and the age of the hardware, not the neighborhood itself. A track reset on a ficus-rooted driveway slab costs more than a hinge adjustment on sound concrete. Every quote is agreed in writing before we start, so the number you approve is the number on the invoice. Period.
Neighborhoods We Serve in Westmont
We run calls all over the 90047 ZIP. Our typical response for emergency gate work in Westmont is same day when you call before noon. You’ll see our trucks along Vermont Avenue, around Westmont Avenue and the 105 corridor, near Locke Street and Century Boulevard, and on the residential blocks off Normandie Avenue.
- Vermont Avenue corridor
- Westmont Avenue and 105 freeway adjacent
- Locke Street and Century Boulevard area
- Residential blocks off Normandie Avenue
- Centinela-adjacent streets
Service Area - Cities Near Westmont
We work the same truck and same crew across this pocket of South LA, so pricing stays consistent whether you’re in Westmont, CA, View Park-Windsor Hills, CA, West Athens, CA, Inglewood, CA, Lennox, CA, or Florence-Graham, CA. Dispatch and scheduling are coordinated from our Los Angeles office, but the person who shows up at your gate knows these streets.
Serving Westmont, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Westmont and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Westmont coverage area; if your address is on it, we can help.
Also serving nearby: Westmont, CA, View Park-Windsor Hills, CA, West Athens, CA, Inglewood, CA, Lennox, CA, Florence-Graham, CA.
FAQs About Gate Repair in Westmont
Yes. We work throughout 90047, from the streets west of Vermont Avenue down to the Centinela corridor, and into the adjacent streets that share the Westmont boundary. If you’re not sure whether you’re in the service area, call and give us your cross street: we have mapped every block in this pocket of South LA.
Yes, and an emergency usually means one of two things: a gate stuck open when you need the property secured, or a gate stuck shut with a car trapped on the wrong side. We prioritize those calls. If your gate is off its track and the motor is grinding, stop using it and call (877) 610-2993. We’ll walk you through how to secure it over the phone, and then get someone there.
Pricing in Westmont is about the same as View Park-Windsor Hills, West Athens, and Inglewood, because we work all those areas with the same truck, the same parts, and the same flat-rate book. What changes the price is not the city, it’s the age of the hardware and the condition of the concrete under the gate. Call (877) 610-2993 for an exact quote; estimates are free.
Need a gate fixed in Westmont with a real price and no surprises? Call (877) 610-2993 for a free estimate. Hal will come out, look at your driveway, your slab, and your gate, and give you a number you can count on.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westmont Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly