Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pasadena, MD
Gate repair in Pasadena, MD typically costs between $150 and $800 depending on whether it’s a hinge, a post, or an opener problem, and most jobs can be scheduled same day or next morning. Pasadena sits close enough to the Chesapeake Bay and the Patapsco River that salt air works into iron gate finishes faster than homeowners expect, and the humid soil shifts post footings through freeze-thaw cycles every winter. If your gate is sagging, grinding, or dead, call (877) 610-2993 and you’ll reach a live person who can give you a straight answer and a real appointment window.
Why Pasadena Homes Are Different
Pasadena’s housing stock tells you how the gate was built and why it’s failing. Plenty of homes here went up in the 1970s and 1980s with original landscape gates, and the hinge hardware on those was never meant to carry the heavier panels people added over the years. The soil holds moisture against post footings long after the surface has dried, so wooden posts rot at the ground line and the gate starts to sag and drag. Then January and February bring freeze-thaw cycles that push shallow footings around, which explains the shifted posts and misaligned latch plates we see every winter.
You also have the salt air. Pasadena is wedged between the Patapsco River and the Chesapeake Bay, and that airborne salt finds its way into iron gate finishes and circuit boards. Powder coat fails, bare steel shows through, and the rust follows. A gate that would last twenty years in a drier inland county might need real attention in eight here. Add the sloped lots around Green Haven, Riviera Beach, and Lake Shore, and you have gates getting pulled out of square by soil movement and gravity at the same time.
Gate Repair in Pasadena
Most gate repair in Pasadena is a hinge post problem, not a panel problem. The post has shifted, the panel has dropped, and the opener is fighting a bind it was never built to handle. We fix that at the source instead of selling you a new gate. You can read more about the full scope on our Gate Repair page, but here’s how the most common Pasadena jobs break down.
Electric Gate Repair
An electric gate that opens when it should not, or won’t open at all, is usually an operator problem, a sensor problem, or a wiring problem. In Pasadena, we routinely find actuator arms fractured at the hinge post after a winter storm or a hard wind off the river, which tears at the arm every time the gate cycles against the load. We diagnose on site, replace the board or arm if needed, and verify the safety edges and photo eyes before we leave. Electric gate repair in Pasadena runs $180 to $520, with operator replacement pushing higher if the board or motor is gone.
Automatic Gate Repair
Automatic gates on Pasadena properties with older operators are reaching the point where boards and arms wear out. We service Ghost Controls, Viking, DoorKing, and Elite operators, and we keep the common boards, arms, and remote receivers on the truck so you aren’t waiting a week on a part. If the operator is too far gone to be dependable, we’ll say so and give you a written price for replacement before touching a bolt.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. On Pasadena homes built in the 1970s and 1980s, the original hinge posts have spent decades in damp soil, and the wood rot softens the post until the screws let go and the gate leans. We reset the footing, install stainless steel brackets where the original wood has failed, and get the gate hanging true again. A typical gate hinge and post repair in Pasadena runs $220 to $480, depending on whether the footing needs to be reset.
Gate Realignment
Realignment in Pasadena is not just about tightening hinge bolts. Driveways here slope, soil settles unevenly, and a gate that was square ten years ago may now sit on an uneven grade. We adjust, shim, fit, and test. Gate realignment runs $150 to $350, and if the panel itself is still sound, we don’t sell you a new one. On ornamental iron with rust in the scroll work, welding and rust repair runs $180 to $600 depending on how much is compromised. The price we quote is the price on the invoice. We don’t add trip charges inside the county, and we don’t start work until you have the number in writing and agreed.
Can you repair a sagging gate without replacing the whole panel in Pasadena?
Yes, in most cases. A gate sags in the hinge post, not in the middle. If the panel is still structurally sound, we reset the post, replace the hinge brackets with stainless steel, and realign the gate. That fixes the sag without the cost of a new panel, which matters when the gate is original to a 1970s Pasadena home and worth keeping.
How much does gate repair cost in Pasadena?
Basic hinge repair or latch replacement in Pasadena usually runs $150 to $300. Post resetting, welding, or opener diagnosis runs higher, commonly $350 to $800 depending on what’s failed. Every estimate is quoted and agreed before any work starts, so the number we give you on the phone is the number on the invoice. Call (877) 610-2993 for an exact quote.
Gate Installation in Pasadena
A new driveway gate in Pasadena typically runs $2,800 to $7,500 installed, depending on whether it’s a swing or slide configuration and what the existing posts will carry. Most single swing-gate installs take one to two days once the materials are pulled. On a tight lot off Mountain Road or in Lake Shore, the driveway slope often dictates the gate type, so measuring before you commit anything matters. Details are on the Gate Installation page.
Driveway Gate Installation
Most Pasadena driveway gates we install are swing gates on ornamental iron or wood, because that’s what the housing stock calls for. But slope changes everything. On properties with a grade, a slide gate often makes more sense than a swing. A standard single swing driveway gate in Pasadena runs $2,800 to $4,500 installed, including the post work. A double swing gate runs $4,200 to $7,500.
Pedestrian Gate Installation
Pedestrian gates on Pasadena homes do double duty. They’re the daily entrance for deliveries and foot traffic, and they’re also the architectural face of the house from the street. We match the existing style and hardware so a new pedestrian gate doesn’t look out of place on an older home. Pedestrian gates typically run $900 to $2,200.
Sliding Gate Installation
Sliding gates are the right answer on Pasadena lots where a swing gate would clip a car, a fence, or the neighbor’s hedge. They’re also common on shared driveways where two properties use one opening. We install rack-and-pinion slide gates with proper track support, because the tight side yards common in Pasadena force the track close to the driveway edge. Sliding gates land between $3,500 and $8,000 depending on track length, operator, and access control.
Security Gate Installation
Security gates in Pasadena usually mean an automated driveway gate with a keypad or intercom, often on a property with a long setback from the street. We install access control from basic keypads to telephone-entry systems, and we’re certified on FAAC, BFT, Linear, Viking, and other major brands. Security gates with keypads or intercoms add $800 to $2,500 on top of the gate itself. The price is agreed before work starts, and we stand on it.
Do I need any special approval before installing a gate in Pasadena?
If you live in a Pasadena neighborhood with a homeowners association or historic overlay, a gate that’s visible from the street may need design review before work is finalized. Standard repairs in existing openings rarely trigger this, but a new gate panel or a complete replacement can. We’ll help you figure out what applies before you spend money on materials.
What does a full gate installation in Pasadena include?
A full Pasadena gate installation includes measuring, post setting, gate fabrication or assembly, operator mounting, and safety photocells if automated. We quote and agree on the total before any work starts, and you get a written price, not a phone estimate that changes at the door. Call (877) 610-2993 for a free measure.
Gate Motor & Opener in Pasadena
Gate motor and opener repair in Pasadena runs $185 to $690 for most jobs, and a full motor replacement with battery backup typically lands between $850 and $1,400 depending on the operator brand and how much old wiring and safety photocells need replacing. Homes off Fort Smallwood Road and Mountain Road often have slide gates on shared driveway rights-of-way where the motor is working hard. The full Gate Motor & Opener page has more detail.
Motor Installation
New gate motor installation in Pasadena starts with measuring the gate leaf, checking the hinge post condition, and confirming the power run. On older homes near Bodkin Beach, we often find the gate was hung on rusted post-and-strap hinges, and a new motor won’t solve anything unless the post gets rebuilt first. A typical LiftMaster slide motor installation on a standard driveway gate runs $850 to $1,400, including the operator, mounting, and safety photocells.
Motor Repair
Motor repair is where Pasadena homeowners save money. If the motor hums but the gate won’t move, it’s often a failed capacitor, a stripped gear, or a bound drive rail rather than a dead motor. We diagnose on site and replace only what failed. Most Pasadena motor repairs run $185 to $480, and we don’t sell you a new operator when a simple component fix would do.
Slide Motor
Pasadena has more slide gates than surrounding flatland areas because so many driveways are short, sloped, or pinched between the house and the neighbor’s fence. A swing gate won’t fit, so a slide motor on a rail is the answer. We install slide motors from LiftMaster, DoorKing, and Elite, and we set the travel limits, safety loops, and photocells so the gate won’t close on a car or a person. Typical slide motor installation in Pasadena runs $950 to $1,450.
Does replacing a gate motor in Pasadena require a permit?
In most Pasadena neighborhoods, replacing an operator on an existing gate does not require a permit, though a full new gate installation where the structure changes may. If you’re in an HOA, check the association’s design rules. We’ll walk you through what applies to your specific property before any work starts, and we won’t start work until the price is agreed in writing.
Why does my gate motor keep burning out in Pasadena?
Because the motor is usually not the problem. In Pasadena, a gate that sags from a rotted hinge post drags extra weight every cycle, and the motor burns out doing work it was never rated for. We fix the post first, then the motor, so you aren’t buying a new operator every two years. Prices are quoted and agreed before work starts.
Gate Access Control in Pasadena
Gate access control in Pasadena means keypads, remotes, phone entry, card readers, and smart systems that decide who gets in. Most Pasadena jobs are repairs or upgrades to existing operators on older homes, and most can be completed in one visit. A live person answers when you call (877) 610-2993. The full scope is on our Gate Access Control page.
Keypad Entry
Keypads are the most common access control request in Pasadena, especially from homeowners with contractors, landscapers, and housekeepers who need regular entry during certain hours. A basic wired keypad for an existing operator in Pasadena typically runs $180 to $340 installed, depending on whether we’re replacing a failed keypad or running new low-voltage wire. We stock keypads compatible with LiftMaster, FAAC, BFT, and Viking operators.
Remote Control
If your remote only opens the gate from the bottom of the driveway but not the street, or you’re replacing one that went through the washer, we can match a new transmitter to your existing receiver. Remote control service in Pasadena runs $95 to $180 for a standard transmitter programmed on site. We don’t sell you a new operator because a remote died.
Phone Entry
Phone entry systems let you buzz a visitor in from your cell phone, which matters on Pasadena streets where people park at the curb and walk up. Phone entry installation in Pasadena typically runs $400 to $800 depending on whether we’re adding a cellular unit or converting an existing intercom. Older wiring may add some labor, and we’ll tell you before we start, not after.
Do access control upgrades in Pasadena need HOA approval?
If your Pasadena property is in an HOA, a visible change to the gate hardware or mounted devices can require design review. Adding a keypad or phone entry to an existing operator is usually straightforward, but a new panel mounted on a public-facing gate may need sign-off. Call (877) 610-2993 and we’ll talk you through what applies to your community.
How much does a keypad or phone entry system cost in Pasadena?
A keypad replacement in Pasadena runs $180 to $340. A phone entry system runs $400 to $800. A full smart access retrofit with video intercom starts around $900. The price is quoted and agreed before any work starts, and estimates are free. We take $40 off any repair over $200.
Gate Parts & Welding in Pasadena
Gate parts and welding in Pasadena usually comes down to two jobs: a hinge or post has failed on an older gate that deserves saving, or a storm has torn something loose and the gate now blocks the driveway. We do the welding on site in your driveway, not in a shop across town. The full scope is on the Gate Parts & Welding page.
Hinge Replacement
Pasadena’s older housing stock has plenty of gates with original hinge hardware that has spent decades in damp soil and salt air. The strap pulls loose from the post or the pin wears egg-shaped. We replace the hinge in kind when it’s salvageable, or we fabricate a matching strap and weld it into the post so the gate hangs true again. A single hinge replacement in Pasadena typically runs $180 to $340.
Post Replacement
A leaning gate post in Pasadena is rarely just a leaning post. The footing may have been undersized when the gate went in, and freeze-thaw cycles plus wet soil have worked it loose. We cut the post at the base, remove the old footing, set new steel, and weld the post back at correct plumb. A full post reset with new steel and concrete runs $450 to $900 per post, and if your post is on a shared property line, we keep the neighbor’s access open while we work.
Rail Repair
The horizontal rails on Pasadena gates take the brunt of every wind and weather cycle. We see cracked welds at the rail-to-stile joint and rust blooms on iron gates that have lost their powder coat. We TIG-weld the crack, grind it smooth, and re-coat the repair so it doesn’t flash rust within the year. Rail repair by TIG weld runs $150 to $400 depending on the crack length and finish work.
Custom Welding
Some Pasadena gates were custom-built to match the house, and nothing at the supply house fits. We weld on site in your driveway, so the gate never leaves the property. Whether it’s a cracked scroll, a missing finial, or a gate modified to clear a new paver driveway slope, the person doing the welding is on Hal’s crew, trained on TIG and MIG. Custom welding work is quoted by the hour at $110 to $160, and you get a written price before we strike an arc.
Can you repair a sagging gate by welding the hinge back on without replacing the post?
Sometimes, but only if the post itself is still sound. If the post is cracked, rotted at the base, or the footing is loose, welding the hinge back on just moves the failure point a few inches away. We’ll tell you honestly which one you need before you spend anything. Fix the panel without the post and you’ll fix it twice.
How much does welding or hinge work cost in Pasadena?
Hinge replacement in Pasadena runs $180 to $340. A full post reset runs $450 to $900 per post. Rail repair runs $150 to $400. Custom welding is quoted hourly at $110 to $160. Every price is quoted and agreed before any work starts, and estimates are free. Call (877) 610-2993.
Brands We Service in Pasadena
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Common boards, arms, and remote receivers are stocked locally for Pasadena jobs, so most repairs don’t wait on a shipped part. See our brands page for the full list.
Pricing for Gate Repair in Pasadena, MD
| Service | Typical range in Pasadena |
|---|---|
| Basic hinge repair or latch replacement | $150 - $300 |
| Gate realignment | $150 - $350 |
| Electric gate repair | $180 - $520 |
| Welding and rust repair | $180 - $600 |
| Hinge and post repair | $220 - $480 |
| Motor repair | $185 - $480 |
| Post reset with new steel | $450 - $900 |
| Keypad replacement | $180 - $340 |
| Phone entry installation | $400 - $800 |
| Gate motor replacement | $850 - $1,400 |
| Single swing gate installation | $2,800 - $4,500 |
| Double swing gate installation | $4,200 - $7,500 |
What pushes price up in Pasadena is usually soil movement around shallow footings, salt-air rust that spreads further than it first looks, and sloped driveways that add labor to a realignment. Whatever the number is, it’s quoted and agreed before any work starts, and that number doesn’t change at the door.
Neighborhoods We Serve in Pasadena
Our crews work throughout Pasadena and know the streets well enough to find you without a map app sending them in circles. Typical response time for gate repair calls in Pasadena is same day or next morning, depending on when you call.
- Green Haven
- Riviera Beach
- Lake Shore
- Pasadena Park
- Sunset Beach area
Service Area - Cities Near Pasadena
If you’re on the edge of Pasadena or a few minutes down the road, we also cover Severna Park, MD, Arnold, MD, Parole, MD, Annapolis, MD, and Glen Burnie, MD. Dispatch and scheduling are coordinated from our Baltimore office, and crews serve Pasadena locally. Find more details on the Pasadena, MD page.
Serving Pasadena, MD - Our Local Coverage Area
Gatewood Fence & Gate crews serve Pasadena and the communities around it; dispatch is coordinated from our Baltimore office. The map shows the Pasadena coverage area; if your address is on it, we can help.
Also serving nearby: Pasadena, MD, Severna Park, MD, Arnold, MD, Parole, MD, Annapolis, MD, Glen Burnie, MD.
FAQs About Gate Repair in Pasadena
In most cases, yes. Same-day service in Pasadena is available when you call before midday, and next-morning slots are standard otherwise. A live person answers at (877) 610-2993 any hour, any day, and will give you a real appointment window, not a four-hour guess.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common parts are stocked on the truck, so most Pasadena opener repairs don’t wait on a shipped part. Call (877) 610-2993 and tell us what’s on the gate.
We work on gates and the fence sections immediately adjacent when the repair requires it, such as a post that anchors both. We don’t take on full fence installations, but if a gate repair means resetting a shared post, we handle it. Call (877) 610-2993 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg