Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tucker
New gate installation in Tucker typically runs $1,800 to $7,500 depending on whether you’re looking at a basic single swing gate or a full automated sliding driveway system. Most installations we schedule in Tucker take one to three days from first post hole to final opener programming, and we quote the full price before any steel hits the ground. If your existing gate has been fighting the red clay for 40 years and you’re ready for something that actually opens and closes the way it should, call (877) 610-2993 and Hal will walk the job with you himself.
Tucker isn’t just another Atlanta suburb on our route. It’s a community full of ranch homes and split-levels that went up between 1960 and 1985, and a lot of those houses still have the original brick pillars with ornamental iron swing gates hanging off them. We know exactly how those gates were hung, because we’ve been freeing them, straightening them, and replacing them for years. When a homeowner on Idlewood Road or near Cofer Park tells us the gate drags on the ground every August, we don’t need a site visit to start forming a picture of what’s underneath it.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Installation Company
Hal Gatewood has owned this company since 2001, and he still shows up to Tucker jobs with his tools in the truck and his name on the invoice. That’s not a slogan for us. The shop address is published, the license number is public, and if something isn’t right after we leave, the 90-Day Done Right Promise means one call brings him back to your driveway. No argument, no voicemail tag, no subcontracted crew that’s never seen your gate before.
Tucker homeowners don’t need another national outfit that treats your property like a line item on a dispatch board. They need someone who understands that a gate in the Huntley Hills area faces different soil movement than one down near Lawrenceville Highway, and that an original 1970s wrought iron frame wasn’t built to carry a modern automated opener without some structural adjustment first. We answer the phone with a live person at 2 a.m. and 2 p.m. alike, because when your driveway gate won’t close and you’ve got a dog deciding whether to stay or wander, you don’t want to leave a message.
Our Gate Installation Services in Tucker
Driveway Gate
A typical driveway gate installation in Tucker runs $2,800 to $6,500 for a single residential swing gate with powder-coated steel or aluminum frame. The biggest variable we see in the 30084 and 30085 zip codes is what’s holding up the posts. Older Tucker subdivisions often have brick pillars with shallow clay-set footings, which means before any new gate goes on, we’re usually digging down to give those posts a foundation that won’t heave again in three years.
Pedestrian Gate
Pedestrian gate installation in Tucker usually runs $900 to $2,400, depending on whether it’s a simple walk gate matching your fence line or something with its own keypad access. We install a lot of these alongside driveway gates on Tucker lots where the original builder ran the fence tight to the house and homeowners now want a separate entry that doesn’t require opening the whole driveway every time. For homes near Main Street with narrower side yards, a properly hung pedestrian gate also takes a beating from the root systems of mature oaks that push against the fence line.
Sliding Gate
Sliding gate installation in Tucker tends to run $3,500 to $7,500, and it’s the better choice for driveways that slope or properties where a swing gate would arc into a retaining wall or the neighbor’s azalea bed. The mechanics are different than what most Tucker homes were built with, so the job usually means running a steel track, setting a new motor post, and adding a cantilever or V-track setup that won’t bind when the clay shifts. We handle the full power run too, not just the gate itself.
Swing Gate
Swing gate installation in Tucker ranges from $1,800 to $4,800, and it’s still the most common request we get because so few of these properties have room for a slide track. The trick in Tucker specifically is that a double swing gate hung on original 1970s brick pillars almost always needs those pillars rebuilt or reinforced before the new gates go on. Hal welds on site, which means the old frame comes down and the new one goes up in your driveway, fitted to the exact spread of your existing pillars or to new posts we’ve set to grade.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tucker
When a Tucker customer asks what opener to put on a new gate, we usually talk through Viking, Ghost Controls, and DoorKing, because those three cover most of the residential setups we see between Clarkston and Chamblee without pushing anyone into commercial hardware they’ll never use. We’re certified to service and install nine major brands, and we keep common parts on hand so a new installation doesn’t stall for a week waiting on a control board. If you’ve already got an Elite opener or a FAAC system and you just need the gate rebuilt around it, that’s fine too. The brand matters less than the hinge alignment and the post footing, and that’s where we start.
Common Gate Installation Problems We See in Tucker Homes
- Heaved gate pillars from shallow footings in red clay. In Tucker’s older subdivisions, the original builders typically set brick pillars directly into the soil with no gravel bed and no deep anchor. Georgia red clay expands when it’s wet and shrinks in summer drought, and over 40 years a pillar can lean three inches out of plumb, which makes any new gate hang crooked the day it’s installed unless we address the base first.
- Storm-damaged frames from falling limbs. Tucker has a heavy mature hardwood canopy, which is part of why the streets look the way they do, but every spring storm season puts branches down on gates, driveway aprons, and opener arms. We do a lot of frame straightening and replacement work for gates that caught a 12-inch limb across the top rail.
- Retrofitting modern openers onto 1960s-1980s hinge configurations. The original ornamental gates in Tucker were manual. They hung heavier iron on hinges that made sense for a person pushing them open. Bolting an automated opener onto that same geometry without adjusting the hinge line and post reinforcement is how you get a gate that binds, stutters, and burns out a motor in two years. We spend the time to get the geometry right before the opener ever gets wired.
- Water and drainage issues under the gate path. Tucker receives around 50 inches of rain a year, and driveway gates near the bottom of sloping lots along Chamblee-Tucker Road or near Henderson Park often sit in a natural drainage path. A new installation needs proper clearance and sometimes a small drainage cut so the bottom rail isn’t wading through standing water every time it rains.
Pricing for Gate Installation in Tucker, GA
- Pedestrian gate: $900 to $2,400
- Single swing driveway gate: $1,800 to $4,500
- Double swing driveway gate: $3,000 to $6,800
- Sliding driveway gate: $3,500 to $7,500
- Opener and automation retrofitted to existing gate: $850 to $2,300
A gate that needs pillar reconstruction before installation starts will run higher than a gate going onto fresh posts, and we’ll show you exactly why in the written estimate before anything is signed. You’ll also get $40 off any installation over $2,000, no trip charge inside the county, and a free second opinion if you’ve got another estimate you want Hal to look at. If you’re a senior or veteran, that’s another 10 percent off, permanently. Call (877) 610-2993 and we’ll give you a real number for your specific driveway, not a range you have to negotiate.
We Also Serve Cities Near Tucker
If you’re just outside Tucker proper, we cover Clarkston, Mountain Park, Stone Mountain, and Chamblee with the same owner-operated setup and the same Gate Installation crews. Whether it’s a sliding gate in Stone Mountain or a pedestrian gate in Clarkston, the footing problem is the same red clay, and we already know what we’re digging into. See our Gate Installation in Tucker service area page for full details. We also handle Gate Motor & Opener in Tucker when the operator is the failing part, and Gate Access Control in Tucker for keypads, intercoms, and entry systems that go beyond the gate itself.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tucker
How quickly can you install a gate in Tucker?
Most gate installations in Tucker are scheduled within five to ten business days from when you approve the estimate, and the installation itself takes one to three days depending on the gate type and whether pillar reconstruction is needed. We don’t promise same-day installation, because proper post footings and hinge alignment take the time they take, and rushing that is how gates go wrong. Call (877) 610-2993 and we’ll give you an honest window for your specific job.
Do you cover all of Tucker, including the 30084 and 30085 zip codes?
Yes, we cover all of Tucker including both 30084 and 30085, from neighborhoods near Main Street up to the split-levels off Lavista Road and the ranch homes toward Mountain Industrial Boulevard. Our crews are local to the area, and there’s no trip charge anywhere inside the county. If you’re on the edge of Tucker and wonder whether you’re in our area, call us and we’ll tell you straight.
What does a full gate installation include?
A full gate installation includes the gate frame and infill material, the posts or pillar reinforcement, hinges and hardware, the opener and any keypad or remote controls you choose, and the electrical run to power the operator. We also handle the finish work, like adjusting the gate so it closes flush and the latch engages cleanly, because a gate that closes properly without being shoved is the whole point. Every job carries the 90-Day Done Right Promise in writing.
Is gate installation in Tucker more expensive than in nearby cities?
Tucker pricing runs very close to what you’d pay in Stone Mountain, Chamblee, or Clarkston, because the materials cost the same and the labor is the same crew. The one thing that raises a Tucker estimate faster than neighboring towns is pillar reconstruction on those 1960s and 1970s brick entry pillars, which is more common here than in newer communities. We’ll show you the labor breakdown before you commit, and our prices are the same whether you call us from Tucker or Tucker’s city line.
Does your warranty apply to gate installations in Tucker?
Yes, every gate installation in Tucker carries our 90-Day Done Right Promise, which means if something isn’t right with the gate, the hinges, the operator, or the workmanship, one call brings Hal back to fix it. This is in writing on your invoice, not a verbal promise. If a post settles in the first ninety days because the clay shifted, we come back and make it right.
Call Gatewood Fence & Gate for Gate Installation in Tucker
We’ve been setting gates in Georgia red clay for a long time, and Tucker’s combination of older brick pillars, mature trees, and expanding soil is something we’ve learned to work with, not fight. If your gate is sagging, dragging, or just tired and you want one that opens and closes like it’s supposed to, call (877) 610-2993 or drive by the shop. Hal will give you a straight quote, in writing, before any work starts, and the price you sign is the price you pay. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker since 2001.