Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sanger
A new driveway or pedestrian gate in Sanger typically runs $1,400-$4,200 installed, depending on width, material, and whether you’re adding an automatic operator. Most jobs are quoted within one to two business days and installed within two weeks once materials land. If you’re calling about a gate that sags, binds, or won’t close, call (877) 610-2993 and Hal Gatewood or one of his crew will tell you straight what’s worth fixing and what’s cheaper to replace.
We’re Gate Installation specialists, not a fencing company that also hangs a gate when they have to. The difference shows up when the gate has to clear a forklift with a bin trailer, survive a tule-fog winter, and keep working through 105°F summers. Sanger pushes a gate harder than most towns, and we’ve been absorbing those lessons since 2001.
Our shop, home to our Gate Access Control in Sanger services, is a short drive from downtown Sanger, right off Highway 180. Hal’s name is on the shop, his license number is on every invoice, and the person you talk to on the phone is the same person who will show up at your gate.
Why Gatewood Fence & Gate Is Sanger’s Preferred Gate Installation Company
We’re the company Sanger calls when a previous outfit quoted one price on the phone and another at the door. Homeowners on Bethel Avenue, Jensen Avenue, and the acreage lots east of town have learned that published addresses and a real person answering the phone matter more than a slick estimate. That’s us. Hal Gatewood has been owner-operated since 2001, and his crew is background-checked and uniformed on every job. Not a rotational cast of subs.
Our Gate Repair - Sanger response time is typically same-day when we’re not already on a job, and next-morning for most everything else. Calls get answered by a live person around the clock, not a voicemail or an answering service in another state. When a gate won’t close and your livestock or kids’ safety is on the line, that matters.
The 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings Hal back. No phone tree, no “we’ll send someone in a week.” That’s the oldest accountability there is, and it’s the one we still work by. We also carry Gate Parts & Welding in Sanger supplies for older operators on the truck more often than not, which means fewer return trips and less waiting on a warehouse.
Our Gate Installation Services in Sanger
Swing Gate Installation
Swing gates are the workhorse of Sanger driveways, and the ones we install are built to handle the ag traffic that comes with the ZIP. On the rural fringes east and south of town, a swing gate has to clear a forklift with a grape bin trailer without a three-point turn. We size the tube steel, hinge pins, and post footings accordingly. A standard residential swing gate in Sanger runs $1,600-$3,800 installed, depending on width and motorization. Posts get set deeper than code minimums because we know what daily equipment traffic does to a footing out here.
Double Gate Installation
Double gates give you that wide opening without a long slide track taking up fence line. On Sanger acreage, most double driveway gates span 14 to 16 feet, and we hang them with heavier hinges and receiver posts than a suburban install would call for. A properly hung double gate in Sanger runs $2,400-$5,500 installed. The real cost is in the piers and the leaf alignment, because a double gate that sags even a half-inch at the middle pin will bind within a season. We align the leaves before concrete sets, not after.
Sliding Gate Installation
Sliding gates make sense on Sanger properties with short setbacks or driveways that rise away from the road. The track and rack are the weak points here, and tule fog does a number on exposed steel. We specify galvanized rack and stainless rollers for Sanger installs, because standard zinc-plated hardware will rust through faster than you’d think. A typical single-leaf sliding gate with operator runs $2,800-$5,800 in Sanger. That’s the honest range, not a teaser to get us in the driveway and then revise the number.
Pedestrian Gate Installation
Pedestrian gates on Sanger’s older homes, the pre-1980 stock near downtown, are usually wood and often hung on original hardware that’s undersized for the posts. We swap in heavier hinges, square the posts, and set the latch so the gate doesn’t rattle in the wind. A simple walk gate with hardware runs $500-$1,200 in Sanger; adding a keypad or mag lock pushes it toward $1,500-$2,000. We work with Sanger homeowners to match existing fencing and keep the look consistent.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sanger
We’re certified to service nine major gate brands, and in Sanger we see a lot of DoorKing and Viking operators on the ag side, plus Linear and Ghost Controls on residential installs. Because we’re local, we keep common boards, photocells, and remotes for these brands in stock, which means fewer return trips. If an operator has a dead control board and the manufacturer discontinued it, we’ll tell you that in plain language and give you a retrofit price against a replacement price. No brand loyalty theater.
Common Gate Installation Problems We See in Sanger Homes
- Loose posts from ag traffic. On the eastern and southern outskirts of Sanger, gate posts set in standard residential concrete footings get rocked loose by daily raisin-grape bin-trailer and forklift traffic. Re-setting and re-plumbing posts is the single most common repeat repair in ZIP 93657. A bigger footing and deeper set is cheaper than doing the job twice.
- Split wooden gates after 105°F summers. Older wooden gates near downtown Sanger check and split after a few San Joaquin Valley summers, which pulls hinge screws loose from undersized posts. Once the wood separates at the hinge line, no amount of screw-tightening saves it. The fix is a steel or reinforced frame, or a post replacement with proper hardware.
- Operators without modern entrapment protection. Legacy gate operators without entrapment protection fail UL 325 compliance and often have obsolete control boards that can’t accept modern safety photocells. You can retrofit an older operator with external photocell kits, but if the board won’t talk to them, replacement is the cheaper answer. We’ll lay out both prices honestly.
- Rust on slide gate tracks from tule fog. Weeks of near-100% humidity during Sanger’s tule fog season accelerates rust on exposed hinge posts and rack and pinion tracks. Slide gates start to bind and stall by February. When we install, we use galvanized or stainless hardware wherever the fog can reach it.
Pricing for Gate Installation in Sanger, CA
Here’s what we see across Sanger in 2026:
- Pedestrian gate: $500-$1,200 installed; $1,500-$2,000 with keypad or mag lock
- Single swing gate, manual: $1,600-$2,900
- Single swing gate with operator: $2,400-$3,800
- Double swing gate, manual: $2,400-$4,200
- Double swing gate with operator: $3,400-$5,500
- Sliding gate with operator: $2,800-$5,800
The price is quoted and agreed before any work starts. Not estimated, not “subject to change when we see the site.” We come out, look at your posts, measure your opening, and write a number. Standing offers apply in Sanger: $40 off any repair or install over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Sanger
Gatewood Fence & Gate works throughout the eastern Fresno County corridor. If you’re in Parlier, Fowler, Reedley, or Clovis, the same crew and the same 90-Day Done Right Promise apply. Most of our Gate Installation in Sanger customers are referred by neighbors in these towns, which tells you what kind of reputation we keep.
Serving Sanger, CA - Our Local Coverage Area
We’re based in the Sanger area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sanger
Because daily raisin-grape bin-trailer and forklift traffic rocks standard residential footings loose within a few years. A post set at a code-minimum 24-inch depth in a 10-inch footing will start to lean under that load. We set posts 30 to 36 inches deep, with a wider flare at the base, on Sanger lots where heavy equipment passes through the gate regularly. It’s the difference between a gate that lasts five years and one that lasts twenty. Call (877) 610-2993 and we’ll tell you what your specific driveway needs.
Usually it can be repaired, and doing so is often cheaper than replacement. We rebuilt a 16-foot double swing gate on an acreage lot off Jensen Avenue where the original hinge post had rotted at the footing and the gate panel sagged enough to drag gravel. Our crew cut out the old post, poured a larger footing, hung a new tube-steel gate with heavier hinges, and aligned a replacement LiftMaster operator with new safety photocells. The gate now clears a forklift with bin trailer without being touched. If the post is sound and only the wood panel has failed, we can face it with steel and save you the post work. We’ll tell you which route costs less, plainly.
Sanger sits low and flat at the eastern edge of Fresno County’s ag belt, and winter tule fog can blanket the area for weeks with near-100% humidity. That moisture seeps into control boards, rusts exposed hinge posts, and eats gear racks faster than in Clovis, which sits higher and clears fog sooner. We spec sealed enclosures and galvanized hardware for Sanger installs, and we inspect operators after the fog season as a routine call. If your operator is acting slow or the gate is binding, call (877) 610-2993 before the board fails entirely.
Yes, if the operator predates UL 325 entrapment standards or has an obsolete control board that can’t accept modern safety photocells. An older operator without entrapment protection is a liability and a safety hazard, especially on a Sanger driveway used by farm equipment and kids who follow the equipment. We can often retrofit external photocell kits and edge sensors, but if the board won’t communicate with them, replacement is the cheaper and safer route. We’ll price both and let you decide, with our recommendation in plain language.
A double swing gate with heavy tube-steel construction, hinge pins sized for a 16-foot leaf, and posts set 30 to 36 inches deep. That’s the configuration we install most often east and south of Sanger, where forklifts, grape bin trailers, and orchard access gear pass through daily. If you want an operator, we pair it with a heavy-duty linear arm or underground operator sized for the gate weight. Sliding gates work too if your fence line has room, but rack and track hardware needs galvanized or stainless components to survive the tule fog. Call (877) 610-2993 for a free measure and a written price.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sanger since 2001.