Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Yukon
Gate repair in Yukon, OK usually runs $185 to $420 for hinge and sag correction work, and $280 to $680 when an automatic opener has failed or needs new drive components. We get to most Yukon homes the same day, often within a few hours, because our shop is set up to serve this side of Canadian County directly. Hal Gatewood has been repairing gates since 2001, and he still shows up on the job himself, not some subcontractor you’ll never see again. Call (877) 610-2993 and you’ll get a live person. Someone who actually knows gates and Yukon.
Why Gatewood Fence & Gate Is Yukon’s Preferred Gate Repair Company
Yukon is not a place where you want to gamble on a gate company. The housing stock here was built fast during the 2000s and 2010s, and the gates that went in with those homes are now hitting their failure window all at once. We know that because we’re out here every week, in the cul-de-sacs off Garth Brooks Blvd, in the older neighborhoods near Vandament Ave, and in the newer HOAs east of Sara Rd. When a Yukon homeowner calls us about a sagging ornamental iron gate, we already know the post is probably out of plumb before we even pull into the driveway. That’s not a guess. It’s Canadian County clay and Oklahoma wind, and we’ve been dealing with both since 2001.
Gatewood Fence & Gate is owner-operated, which means the name on the shop is the name on the invoice. Hal Gatewood lives here, works here, and has a published address and license number anyone can look up. The crew is background-checked and uniformed, but the point is simpler than that: the person who shakes your hand is the person accountable for the work. That’s why every job carries a written 90-Day Done Right Promise. If it’s not done right, we make it right. One call brings us back.
Scheduling and dispatch are coordinated from our Oklahoma City metro office, but the crews serving Yukon are local to this side of the county. That’s why response time is measured in hours, not days. And unlike the national outfits that quote one price on the phone and hand you a different number at the door, we quote plain numbers up front. Every price is agreed on before any work starts.
Our Gate Repair Services in Yukon
Hinge & Post Repair
This is the repair we do more than any other in Yukon, especially in HOA neighborhoods built between 2005 and 2015. The original builder-grade hinges on those ornamental iron gates were never spec’d for Oklahoma’s wind load, and the posts were set in expansive red clay that heaves with every wet winter and dry summer cycle. A gate sags in the hinge post, not in the middle. We correct the post, reset it with deeper concrete where needed, and replace the hinge hardware with components built for this soil and this wind. Fix the panel without the post and you’ll fix it twice.
Automatic Gate Repair
Automatic gate operators in Yukon take a beating from two directions: freeze-thaw cycles in winter and persistent 20 to 30 mph southwest winds the rest of the year. When a Linear or LiftMaster swing arm strips its drive gear, or a Viking slide gate loses its rack and pinion alignment, the gate doesn’t just stop working. It usually fails partly open, which leaves your yard exposed. We service nine major brands and stock common parts so most automatic gate repairs in Yukon are done same day, not shipped-in-next-week.
Gate Realignment
In Yukon’s expansive clay soil, a gate that latched fine last spring can be an inch out of alignment by August. That’s settlement, not something you’re doing wrong. Realignment means resetting the hinges, verifying the posts are plumb, and re-establishing the latch and drop rod points so the gate closes cleanly and stays closed. It’s also the cheapest repair we do, and the one that most often gets ignored until the latch tears out the strike plate entirely.
Lock & Latch Repair
Yukon’s freeze cycles do a number on gate locks, especially the keyed mechanical latches inside builder-grade iron gates. Water works into the lock body, freezes, and splits it. Drop rods snap off in the concrete with a sound you can hear from the kitchen. We replace locks, rebuild latch boxes, and re-set drop rods so they actually drop into the sleeve instead of resting on top of it.
Key Takeaways:
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Yukon
We are certified to work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Yukon, the three we see most often are LiftMaster on swing gates, Linear on slide gates, and DoorKing on pedestrian gates in commercial and HOA common areas. We stock common drive gears, control boards, and limit switches for these brands, which means we can usually repair a Yukon gate operator the same trip instead of making you wait on a parts order. If you have a Ghost Controls or Viking unit that’s failed, call us. We’ve probably got the part or can have it here fast.
Common Gate Repair Problems We See in Yukon Homes
- Post lean from expanding clay. Canadian County’s red clay swells after heavy rain and shrinks during drought. A post set in 2008 has been through 15 years of that cycle. The result is a hinge post tipping outward, a latch that misses the strike plate, and a gate that drags on the driveway.
- Ice storm damage to operators. Yukon gets a real ice storm every couple of winters. A quarter-inch of glaze adds hundreds of pounds to a gate panel and freezes the operator’s drive mechanism solid. When the motor tries to move against that, gears strip. January and February are our busiest months for automatic gate repair in Yukon.
- Builder-grade hardware failure. Entire Yukon HOA phases were built with the same budget hinge-and-latch kits. When one house on a street starts sagging, the neighbors are usually weeks behind it. We’ve repaired four gates in one cul-de-sac in a single afternoon, because the failure was identical in all four.
- Wind-stressed swing gates. Yukon sits in Oklahoma’s southern wind corridor. A 30 mph southwest wind putting constant lateral force on an ornamental iron gate will loosen hinge bolts, wallow out hinge barrels, and accelerate post lean. Annual tightening helps, but by year 10 or 12, most of these gates need a real hinge and post correction.
Pricing for Gate Repair in Yukon, OK
A typical hinge and post repair in Yukon runs $185 to $420, depending on how far the post has moved and whether we need to re-set it in new concrete. Gate realignment is usually $120 to $250. Automatic gate operator repair ranges from $280 for a simple control board or limit switch replacement to $680 for a stripped swing arm drive or a failed Viking slide gate motor. Lock and latch repair is $90 to $220. We quote every price before we start, and we don’t change it at the door. You also get $40 off any repair over $200, and there’s no trip charge inside Canadian County. Seniors and veterans get 10% off, permanently. If you have a written estimate from another company, bring it to us. We’ll give you a free second opinion on it.
We Also Serve Cities Near Yukon
Our Gate Repair crews work across the western Oklahoma City metro. If you’re in Bethany, Warr Acres, Mustang, or The Village, we cover those areas too. And if you’re reading this from anywhere else in Canadian County, call anyway. This is our Yukon home turf, and we’ll be straight with you about whether we can get there fast.
Serving Yukon, OK - Our Local Coverage Area
We’re based in the Yukon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Yukon
Because the same builder installed the same budget hinge-and-latch kits across entire phases of hundreds of homes, and those components have the same 15 to 20 year lifespan. When one gate on a Yukon street starts sagging, the neighbors’ gates are usually weeks behind it. The soil, the wind, and the hardware are identical. If your gate is starting to sag and your neighbor’s already failed, call (877) 610-2993 before yours does the same thing.
In a Yukon HOA, adding automation to a manual swing gate means two things: your HOA’s design standards, and the fact that the original hinge posts were probably never meant to carry an operator’s torque. We can usually add the operator without replacing the gate, but we often need to reinforce the hinge post or re-set it in deeper concrete first, because an opener puts lateral force on the post that a manual gate never did. We also handle conduit and power runs. In many Yukon subdivisions, the electrical stub was never roughed in, which means a trench across the driveway or a surface-mounted run that meets code.
Because Canadian County’s red clay expands when it’s wet and shrinks when it’s dry. A wet winter swells the soil and pushes the post out of plumb. A dry summer shrinks the soil and leaves a void around the concrete collar, so the post settles or tips into the gap. Yukon’s feast-or-famine rainfall makes this cycle aggressive. If your post is leaning, the fix is not a bigger latch. The fix is re-setting the post with deeper concrete and correcting the hinge geometry. Call us for a quote before it gets worse.
First, don’t force the gate open manually against a frozen operator. You can break the rack and pinion on a slide gate or strip the swing arm gear. If the operator hums or clicks but the gate won’t move, kill power to the unit. Check for ice buildup on the track, the hinges, and around the drive mechanism. If the gate panel itself is loaded with ice, leave it. The added weight can bend the panel or crack a weld. Then call us. We get a spike of Yukon calls every January and February for exactly this, and we stock the common gears and control boards to fix it same day.
Yes. Most Yukon HOA design standards for ornamental iron gates specify the finish, the general style, and the color, not the specific hinge hardware or post depth. We match standard black powder-coated hardware and keep the gate’s original look. If your HOA requires approval for a gate replacement or a new operator, we can give you a spec sheet and photos for the architectural review committee. We work within the standards, not around them. Call (877) 610-2993 and we’ll walk you through what your specific HOA needs to see.
If your gate is sagging, your opener is dead, or you just drove over a drop rod that snapped off in the driveway, call (877) 610-2993. We answer with a live person, we show up when we say we will, and the price we quote is the price you pay. Written 90-Day Done Right Promise on every job. Free estimates in Yukon. No trip charge inside Canadian County.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Yukon since 2001.