Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wilsonville
Gate repair in Wilsonville usually costs $180-$340 for common fixes like hinge replacement, post stabilization, or a new control board, and same-day service is available for urgent failures. If your gate won’t close, sags into the path of your car, or the opener hums but nothing moves, you’ll want someone who knows Wilsonville’s specific housing stock and HOA landscape. We’re Gatewood Fence & Gate, and we’ve been repairing gates in the metro area since 2001. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Wilsonville’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is on the building and on every invoice. That matters in Wilsonville, where HOA-governed subdivisions like the Charbonneau District mean the person fixing your gate has to answer for the work long after the truck leaves. We’re not a national outfit with a dispatch queue three states away. We’re local, owner-operated, and our crews serve Wilsonville directly from the Portland office.
We get called to Wilsonville for one recurring reason: builder-grade gate operators from the 1990s and 2000s are failing in clusters now. A homeowner in Villebois will mention their neighbor down the street had the same operator die two weeks earlier. That’s not coincidence. That’s the buildout cycle. We know exactly what to look for because we’ve seen the same LiftMaster and Linear boards fail across dozens of Wilsonville properties this season. Our 90-Day Done Right Promise comes in writing on every job. If it isn’t right, one call brings Hal back. No runaround, no “in most cases” fine print.
Our Gate Repair Services in Wilsonville
Electric Gate Repair
When a gate stops opening in Wilsonville, the first place we check is the operator and its control board, not the gate itself. Charbonneau District especially. That community was wired in the early-to-mid 1990s with LiftMaster and Linear operators almost exclusively. A dead board there often means the same failure is happening at adjacent gated entries. We stock boards for those brands locally, so a Tuesday call in Wilsonville doesn’t wait for a part to ship from California. We diagnose on site, quote the repair before any work starts, and usually finish same day.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. Wilsonville gets 40-plus inches of rain from October through April, and low-lying sections near the Willamette River drain slowly. Post footings stay saturated for weeks. Concrete heaves, wood posts lean, and hinges pull loose. We weld and reinforce on site rather than hauling the gate away. In neighborhoods like Charbonneau and French Prairie, we’ve repaired hundreds of hinge posts that a less patient company would have called a total replacement. Hal’s crew welds in your driveway so your gate never leaves the property.
Gate Realignment
If your gate drags on the ground or catches the latch plate, realignment usually fixes it without touching the operator. In Wilsonville’s planned subdivisions, gates were often installed on wood posts before the surrounding soil settled. Ten years of Willamette Valley rain shifts things. We reset posts, re-square the frame, and adjust hinges so the gate closes cleanly. The fix is mechanical, not magical, and it should include re-checking the safety photocells at the same time. A gate that closes crooked usually has a misaligned sensor, too.
We also handle Gate Repair that requires on-site welding, rust repair on ornamental iron, and lock replacement across every Wilsonville ZIP, 97070 included. If a gate has a problem, we have probably fixed its twin in the same subdivision.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilsonville
We’re certified to service nine major gate brands, and in Wilsonville, that usually means LiftMaster, Linear, Ghost Controls, and DoorKing. Charbonneau’s 1990s buildout leaned on LiftMaster and Linear. Newer Villebois homes often have Viking or Ghost Controls openers. We stock control boards, keypads, remotes, and safety edges for all of them, and we repair what we can rather than swapping parts that don’t need swapping. A $340 board replacement beats a $2,400 operator swap every time, unless the operator truly is dead.
Common Gate Repair Problems We See in Wilsonville Homes
- Cluster failures in 1990s-built communities. Charbonneau District operators were installed in the same era with the same hardware, so a failed LiftMaster or Linear board tends to mean three or four neighbors need the same repair within a month.
- Undersized or missing conduit runs. Many Wilsonville homes built in the 1990s and 2000s didn’t get spare conductors or a power run for automation. Adding a safety photocell or retrofitting an opener often means trenching across HOA-governed common areas, which requires design approval.
- Wood gate frames rotting from rain. Forty-plus inches of rain concentrated in fall and winter means cedar gate frames near the river hold moisture and rot at the hinge points faster than anywhere else in the metro.
- Post lean and hinge pulled loose. Saturated footings in low-lying Wilsonville sections cause concrete heave, and the post goes with it. The gate still works, but it wedges and drags, and the hinges start pulling.
Pricing for Gate Repair in Wilsonville, OR
Here’s what we tell Wilsonville customers before we ever roll a truck. A standard hinge and post repair runs $180-$280. Gate realignment typically lands at $150-$250. Electric gate repair, including a control board, runs $300-$450 depending on the brand. Full operator replacement runs $900-$2,400 installed, and that includes new safety photocells if the old ones fail UL 325 standards. The price is quoted and agreed before any work starts. You will not get a different number when the truck arrives. That’s a promise, not a policy footnote. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Wilsonville
Our crews cover Wilsonville and the surrounding communities, including Tualatin, Canby, Sherwood, and West Linn. If you’re just outside city limits and wondering whether we make the drive, call and ask. We do. The Charbonneau District and French Prairie areas are regular stops for us, not exceptions.
Serving Wilsonville, OR - Our Local Coverage Area
We’re based in the Wilsonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Wilsonville
The Charbonneau District was wired in the early-to-mid 1990s with LiftMaster and Linear operators almost exclusively, and those units hit 25-30 years of service life around the same time. Wet winters kill the control boards en masse. A single service call there often means replacing the same failed board across multiple adjacent gated entries in one week. We keep those boards stocked specifically because Wilsonville keeps needing them. Call (877) 610-2993 and we’ll get yours tested.
Yes, in most Wilsonville subdivisions, especially Charbonneau and other HOA-governed communities, repair parts and finishes must match the original HOA-approved materials and styles. That means you can’t always swap a cedar gate post for pressure-treated pine without design approval. We work with Wilsonville HOAs regularly and can help you get the right paperwork or at least flag what needs approval before we touch anything. The estimate is free, and the material spec goes in writing before work starts.
In most cases, yes. The catch is that many Wilsonville homes from the 1990s and 2000s didn’t get a power run or spare conduit installed to the gate during the build. That means we often need to trench a new low-voltage line across your yard, and if the gate sits on HOA-governed common area, the trench needs design approval first. We handle the power run, the operator, and the safety photocells, and we’ll quote the whole scope before anything gets dug. Call (877) 610-2993 and we’ll walk your property.
Because the problem is rarely the hinges. Wilsonville gets 40-plus inches of rain between October and April, and in low-lying areas near the Willamette River, post footings stay saturated for weeks. The post leans, the gate sags, and tightening the hinge only pulls the lag screws out further. We reset the post in a properly drained footing and reinforce the hinge point, and the gate stops sagging for good. The 90-Day Done Right Promise covers it if it doesn’t.
No, and it almost always means a missing or misaligned safety photocell. UL 325 entrapment protection requires working safety edges or photocells that reverse the gate when something enters the path. If your gate closes on your car, it will close on a child. We were called to a swing gate in the Charbonneau District that wouldn’t close after a rainstorm; the LiftMaster operator board was dead. Our tech replaced the board, then found the original conduit from the 1990s had no spare conductors, so we ran a new low-voltage line for the safety photocell to bring the gate up to current UL 325 entrapment protection. Don’t wait on this one. Call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Repair in Wilsonville
The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. If your gate won’t open, sags, or the motor hums and nothing moves, call (877) 610-2993. A live person answers, and Hal or one of his crew will be out to Wilsonville with a straight quote before any work starts. Estimates are free, and we don’t change the number when we arrive.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wilsonville since 2001.