Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wichita
Gate repair in Wichita usually costs between $185 and $640 depending on whether we’re fixing a sagging wood gate, a broken Wichita Gate Motor & Opener, or a bent steel frame. Most repairs at homes in 67213, 67214, 67215, and 67216 are done in a single visit, and we answer the phone around the clock. If your gate won’t latch, your opener quit, or your hinges pulled loose, call (877) 610-2993 and Hal will tell you straight what it needs.
We’ve worked on thousands of Wichita gates since 2001, and we know this city’s gates fail in a particular way. The wind never really stops here. The soil underneath your posts is moving all year. By the time a homeowner calls us, they’ve usually been fighting the same gate for months. We’d rather fix it once.
Why Gatewood Fence & Gate Is Wichita’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door and every invoice. We’re not a franchise and we don’t route calls to a call center three states away. A live person answers our phone at 3 p.m. and at 3 a.m. The address is published, the license number is published, and if you want to look us in the eye before you hire us, you can drive to the shop and do exactly that.
Wichita homeowners keep our number for one reason: we repair gates other companies want to replace. A national outfit will quote you a full gate swap when the hinge post is simply out of plumb. We offer Wichita Gate Parts & Welding on site, we reset posts in deeper footings, and we stand behind the work with a written 90-Day Done Right Promise. If it’s not done right, one call brings Hal back. No runaround, no “up to” language, just the promise stamped on every job.
We know the neighborhoods here. The ranch homes in 67213 and 67214 with their original 1960s cedar gates. The gated subdivisions east of Rock Road where 1990s ornamental iron automatic gates are now hitting the end of their operator lifespan. The newer builds in Derby and Andover where Ghost Controls and Viking units are common. Knowing the difference between a 60-year-old wood-post gate and a 25-year-old automated iron gate changes how we diagnose the problem before we ever touch a tool.
Our Gate Repair team covers all of Wichita with no trip charge inside the county. We give you the price before we start, and that’s the price on the invoice. No haggling required, and $40 off any repair over $200 is standing, not a seasonal gimmick.
Our Gate Repair Services in Wichita
Electric Gate Repair
Most Gate Access Control in Wichita failures trace back to the control board, the limit switches, or the safety edges. Older operators, especially first-generation LiftMaster and DoorKing units installed on 1990s east-side homes, often have control boards that are simply no longer manufactured. We stock current UL 325-compliant replacements locally, so you’re not waiting on a backordered part while your gate sits half-open with a car behind it. We’ll tell you honestly whether the operator is worth retrofitting or whether replacement is the cheaper long-term answer.
Automatic Gate Repair
Automatic swing and slide gates in Wichita take a beating from sustained winds. A 40 mph gust hitting a 16-foot steel gate applies enormous torque at the hinge points and the opener arm. We see bent brackets, stripped gears, and motor failures that trace back to nothing more than wind fighting the operator for years. We service Viking, Ghost Controls, DoorKing, and Elite units, and we keep common parts on the truck when we roll out to your neighborhood.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Wichita’s shrink-swell clay pushes posts out of alignment every season. When you call us about a gate that won’t latch, the first thing we check is whether the post itself has moved. We reset posts in deeper concrete footings, sleeve compromised wood posts in steel, and weld cracked hinge plates back to structural steel. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Wichita’s spring rains saturate the clay and heave posts upward. By August, the ground has dried and contracted, and the post settles back, but never exactly where it started. Gates bind at the latch strike. Automatic slide gates jump the rack. Self-closing hinges throw the leaf out of square. We realign the gate, adjust the hardware, and when the soil is the problem, we address the footing so you’re not calling us again in six months for the same sag.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wichita
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Wichita Mighty Mule service. Many Wichita homes have Ghost Controls or DoorKing openers, and we keep those parts in stock locally rather than making you wait for a distributor to ship from Dallas. If a brand’s control board has been discontinued, we’ll tell you that plainly and show you what a retrofit costs compared to a full replacement. No upsell, just the options.
Common Gate Repair Problems We See in Wichita Homes
- Wind-driven metal fatigue. Sustained Great Plains winds rack gate frames year-round, and the stress concentrates at weld points. We regularly find hairline cracks at the mid-rail welds on ornamental iron gates before the homeowner ever notices, and by the time the gate visibly sags, the crack has usually spread through the whole joint.
- Clay soil heave and post movement. Wichita’s expansive clay takes on water in spring and shrinks in summer, which means the hinge post you set square in April is a full inch out of plumb by August. This is the single most common cause of “my gate worked fine last month” calls we get.
- Obsolete automation without UL 325 protection. Gates installed before the mid-2000s often lack current entrapment protection, and their control boards went out of production years ago. When these fail, a repair isn’t possible; the operator has to be replaced with a compliant unit. We handle the full swap in one visit.
- Storm damage from straight-line winds and hail. Tornado season hits Wichita hard. Hail dents aluminum panels, straight-line winds twist hinge brackets, and the same storm that bends your gate also saturates the ground and heaves the post it hangs from. One storm, two or three failures at once.
Pricing for Gate Repair in Wichita, KS
Here’s what you can expect to pay in Wichita, based on what we actually see on job sites here:
- Hinge and post reset: $220-$480. A wood post reset in clay soil runs toward the higher end; a steel sleeve over a compromised post adds about $90-$140.
- Gate realignment: $140-$260 for a standard swing or slide gate. If the footing needs re-pouring, add $150-$300.
- Electric gate operator repair: $200-$560 depending on whether we’re replacing a limit switch, a control board, or the motor itself. Full operator replacement on a 1990s gate often runs $700-$1,200 installed.
- Weld repair on steel or ornamental iron: $160-$400, depending on the number of cracked joints and whether we need to reinforce the frame while we’re in there.
- Warped or rotted wood gate repair: $190-$450. We’ll tell you honestly if the gate is worth saving or if a new leaf is the smarter money.
Every price is quoted and agreed before any work starts. You’ll know the number before we pick up a tool, and that number doesn’t change when the job is done. Call (877) 610-2993 for a free estimate. No trip charge inside Sedgwick County.
We Also Serve Cities Near Wichita
Our Gate Repair in Wichita coverage extends to Park City, Haysville, Derby, and Andover. Same local crews, same live-answer phone, same written promise on every job. If you’re just outside the city limits, call us and we’ll tell you exactly when we can be there.
Serving Wichita, KS - Our Local Coverage Area
We’re based in the Wichita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Wichita
Your gate isn’t moving; your post is. Wichita’s expansive clay soil absorbs water during spring rains and heaves upward, shifting the hinge post out of plumb. When the summer heat dries the soil, the post settles back but rarely to the exact same position. The gate then binds at the latch strike because the two halves are no longer in alignment. The fix is resetting the post in a deeper footing below the shrink-swell zone, not just re-hanging the gate on the same moving post. Call (877) 610-2993 and we’ll check your post movement with a level before quoting anything.
Sometimes. If the gate’s motor and gearbox are sound, we can replace the obsolete control board with a current UL 325-compliant unit and add photo eyes and edge sensors. That retrofit typically runs $400 to $700. If the operator is already failing mechanically, the smarter money is a full replacement, which in Wichita usually runs $1,100 to $1,600 installed. We’ll give you both numbers and let you decide without pressure. Free estimates.
A straight-line wind gust of 50 to 70 mph hitting a wide swing gate applies enormous leverage at the hinge post and opener arm. The frame flexes, hinge welds crack, and the opener’s limit switches get forced past their travel stops. We see bent bracket plates and stripped gears every spring in Wichita, and the damage is often hidden until the gate rips a hinge clean off weeks later. After any severe storm, it’s worth having the gate inspected. Call us for a free second opinion on any written estimate you’ve already received.
Stop using the gate immediately. A jumped rack means the gate’s drive teeth are no longer meshing with the pinion gear, and running the operator will grind the gear and bend the rack further. The jump usually happens because the post or the concrete track has shifted from soil heave, and the repair means resetting the track alignment before remounting the rack. A typical rack-and-pinion realignment in Wichita runs $180 to $300 unless the rack itself is damaged. Call (877) 610-2993 and we’ll fix it before the gear gets destroyed.
It depends on what’s failing. If the wood post is rotted underground but the gate panel is solid cedar, we often sleeve the post in steel and reset it in concrete, which costs far less than a full replacement and preserves the gate’s original character. If the panel itself is rotted, warped, or has been patched repeatedly, a new leaf usually makes more sense than another round of repairs. We’ll show you the condition of the wood and let the evidence decide. A post sleeve and reset typically runs $280 to $520 in Wichita.
Call Gatewood Fence & Gate for Wichita Gate Repair
If your gate sags, won’t latch, won’t open, or took a beating from the last storm, call (877) 610-2993. Hal will answer, ask what’s going on, and tell you what it’ll take to fix it. You’ll get a straight price before we start, a written 90-Day Done Right Promise when we finish, and the name of the person who owns the shop on every invoice. That’s how we’ve done it since 2001, and that’s how we’ll do it for you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wichita since 2001.