Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Walpole
If your automatic gate in Walpole is sagging, stuck, or dead, you’re not alone. We see it every week from Common Street to the winding drives off South Street. Gate repair in Walpole usually starts around $180 for a hinge replacement and runs $350-$900 for a full operator or post reset. If the gate won’t open at all, we can usually get to your property within one to two days, often sooner. Call Hal’s crew at (877) 610-2993 and we’ll tell you straight what it’ll take to fix.
Why Gatewood Fence & Gate Is Walpole’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. That matters in a town like Walpole, where people still ask who did the work before they call. We’re not a national outfit that quotes one price on the phone and shows up with another. We publish our address. Our license number is there for anyone to look up. If you want to drive to the shop and look Hal in the eye before you hire us, you can do that.
Walpole homeowners call us because we repair before we replace. A sagging gate on a long, tree-lined driveway off Fisher Street doesn’t always need a new gate. It often needs a hinge post that stopped being plumb three winters ago. We weld on site, so your gate stays in your driveway. We stock parts for operators Walpole homes actually have: Linear, DoorKing, Ghost Controls, Viking. And every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
We answer the phone with a live person, 24/7. Not a voicemail. Not a chatbot. When your gate stops working at 6 a.m. before work, someone picks up. That’s how we’ve done it since day one.
Our Gate Repair Services in Walpole
Electric Gate Repair
When a gate operator dies, the first question is whether the board failed or whether it burned out fighting something else, usually a frost-heaved post or a binding hinge. In Walpole, with 30-plus freeze-thaw cycles a year, it’s often both. We diagnose the whole system, not just the obvious part. We service LiftMaster, Linear, DoorKing, Ghost Controls, Viking, and more, and we keep common boards and safety edges stocked in the truck for Walpole calls.
Automatic Gate Repair
Automatic gates around Walpole are often original to homes built in the 1990s and 2000s. A 25-year-old operator near the Neponset River corridor has been through a lot. Control boards fail from moisture and age, photo-eyes quit after years of wet debris, loop detectors stop sensing vehicles reliably. We handle the entire automatic system, including the safety edge and photoelectric sensors required under UL 325. We don’t put a new motor on a bad frame and call it fixed.
Hinge & Post Repair
This is where most Walpole gate problems actually start. The silty, high-water-table soils near the Neponset and Mill River wetland corridors freeze and thaw hard every year. Frost pushes posts up and out of plumb. A hinge post that has heaved two inches means the gate no longer closes square, the latch binds, and the operator strains until it burns out. We reset posts with deeper, frost-protected concrete bases, replace worn hinge leaves, and weld cracks on site. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that drags on the ground or won’t latch in the spring has usually moved at the hinge. Maybe the post shifted, maybe the wood swelled, maybe the iron frame rusted through at the leaf. We bring the gate back to square, adjust the hinges, reset support wheels, and check the operator’s force settings so it’s not fighting itself. On older Walpole gates we’ll often find the real problem isn’t the operator at all, it’s the post that moved the gate off its line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Walpole
We’re certified to service nine major gate brands, and around Walpole we see a lot of Linear and DoorKing operators on older estates, plus Ghost Controls and Viking on newer installs and long driveway systems. We stock common pivot arms, control boards, safety edges, and photo-eyes for those brands right in the truck, so a trip to a Walpole home usually ends with the gate working, not waiting a week for a part to ship. If the board is obsolete and no longer made, we’ll tell you that honestly before we start, and we’ll give you options.
Common Gate Repair Problems We See in Walpole Homes
- Frost-heaved posts near wetland buffers. Homes along the Neponset River corridor and near Mill River wetlands sit on silty, high-water-table soil. Posts set even below frost depth can heave several inches by March. The latch binds, the gate hangs crooked, and the operator burns itself out compensating.
- Obsolete control boards on 1990s and 2000s operators. Walpole’s building wave from that era put in a lot of automatic gates that are now 20-30 years old. Boards fail from age and moisture at the same time hinges wear and iron posts rust, and the whole system fails together.
- Safety sensors failing from wet, freeze-thaw exposure. Photo-eyes and loop detectors on legacy automatic gates in Walpole quit after years of wet ground, tree litter, and freeze cycles. When those fail, the gate may stop closing or become unsafe. This is a repair you don’t put off.
- Rotted wood posts on older swing gates. Walpole’s stock of colonial-revival and cape-style homes often came with pressure-treated wood swing gates on wood posts. After 20-plus years in Norfolk County’s wet springs, the posts rot at the ground line and the gate drops, dragging on the driveway.
Pricing for Gate Repair in Walpole, MA
Here’s what Walpole homeowners can expect, based on the work we do most:
- Hinge replacement or repair: $180-$340 depending on size, weight, and material
- Post reset with new concrete base: $450-$900 depending on frost depth and access
- Gate realignment and latch adjustment: $220-$400 for a typical single swing gate
- Automatic operator replacement: $750-$1,800 installed, depending on brand and gate weight
- Control board replacement: $300-$700 with labor, depending on brand and availability
Every price is quoted and agreed before any work starts. You’ll never see an invoice bigger than the quote. We charge no trip charge inside Norfolk County, and there’s $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. If you have a written estimate from another company, bring it to us for a free second opinion. Call (877) 610-2993 and we’ll give you a straight number.
We Also Serve Cities Near Walpole
If you’re outside Walpole proper, we also serve Medfield, Norwood, Norfolk, and Sharon. Walpole’s gate problems aren’t unique, but the soils near the Neponset and Mill River corridors sure make them predictable. Our Gate Repair team covers the whole area, and you’ll find the same owner-operated service whether you’re in 02081 or the next town over. See more about Gate Repair in Walpole here.
Serving Walpole, MA - Our Local Coverage Area
We’re based in the Walpole area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Walpole
Because Walpole’s silty, high-water-table soils near the Neponset River and Mill River wetland corridors don’t drain well, and water-saturated soil freezes and expands with more force than dry soil. Frost depth in Norfolk County reaches 48 inches, but posts set in wet silt can heave even when set below that. A post set in poorly draining soil acts like a cork in a bottle. Every spring, the gate is further out of plumb until the latch and operator start failing. We reset these posts with a wider, deeper footing and gravel drain at the base. Call (877) 610-2993 and we’ll come look.
Not always. The operator may still be fine. What often happens in Walpole is the hinge post heaves or the hinge leaves wear, and the gate starts binding. The operator then works harder every cycle until it fails. If the operator still runs smoothly and holds force settings, we can fix the post and hinges and keep the unit. If the board is aged and the motor is drawing high amperage, we’ll tell you honestly that replacing it now is cheaper than nursing it another year. Show me the gate closing on its own and I’ll show you where it’s failing.
Yes, in practice. When we repair or service an automatic gate in Walpole, we bring it up to current UL 325 safety requirements. That means working photo-eyes, a functioning safety edge or obstruction sensor, and a properly adjusted operator force setting. If your old gate lacks entrapment protection, it’s not just a liability question. It’s a real risk to kids, pets, and delivery people. We won’t put an operator back in service without the safety pieces working. Call (877) 610-2993 and we’ll walk you through what your gate needs.
It depends on the post and the frame. Around Walpole, we see a lot of pressure-treated wood swing gates from the 1990s that rotted at the bottom rail and hinge mounts. If the frame is solid and only the post is rotted, we can set a new post and rehang the original gate. If the rails are soft and the pickets are splitting, restoring it costs more than a new gate built to the same dimensions. We’ll give you that honest comparison before any work begins. Free estimate, no pressure.
That pattern is a Walpole signature. Over the winter, wet soil around the posts freezes and thaws 30-plus times. Each cycle moves the post a little. By March, the post has shifted enough that the gate binds, the latch won’t release cleanly, and the opener trips its overload or burns out a board. The opener didn’t fail on its own. It failed fighting the post. We fix the post and the opener together. One job, one call, one written guarantee.
Get Your Walpole Gate Fixed Today
If your gate is down, sagging, or refusing to open, call Hal’s crew at (877) 610-2993. We’ll give you a straight answer, a free estimate, and a price that’s agreed before we touch a wrench. We serve all of Walpole, 02081, from Common Street to the back roads off Washington Street. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Walpole since 2001.