Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Spring Hill
Gate repair in Spring Hill, TN typically runs $145-$385 for most common fixes, with hinge and post rebuilds landing between $350 and $800 depending on gate weight and access. We answer the phone around the clock and can usually have a crew at your subdivision entrance or driveway the same day you call. You’ll hear a live voice, not a recording, and the person on the other end knows Spring Hill streets like Duplex Road and Kedron Road. Call (877) 610-2993 and tell us what the gate is doing. We’ll tell you what it likely needs before anyone rolls a truck.
Why Gatewood Fence & Gate Is Spring Hill’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door. That matters in Spring Hill, where homeowners and HOA boards have learned the hard way that the company on the other end of an 800 number may not know the difference between a Viking operator and a BFT. We do. Our Gate Repair crew works on the mid-2000s FAAC and LiftMaster slide operators that populate dozens of communities along Duplex Road, Campbell Station Road, and Main Street, because we have been doing it long enough to have seen those exact boards installed, fail, and get replaced.
Spring Hill customers call us because the person who answers knows the terrain. When an HOA president in Cherry Grove says the gate is phantom-opening for garbage trucks, we already know the loop detector is probably picking up the truck’s steel body because the sensitivity was never re-tuned after the road was repaved. That kind of local pattern recognition comes from living in the work, not from a script. We show up in uniform, background checked, and we fix the gate in place. We do not haul anything off to a warehouse two counties away unless there is no other option.
Our Gate Repair Services in Spring Hill
Electric Gate Repair
Electric gate repair in Spring Hill often means a control board that cooked itself during a summer thunderstorm’s power surge, or a motor capacitor that gave up after years of Tennessee humidity. We service nine major brands, and we keep the ones we see most in Spring Hill on the truck: FAAC, LiftMaster, Linear, and Viking boards, capacitors, and limit switches for the mid-2000s generation that HOA builders installed by the dozen. For complete Spring Hill Gate Motor & Opener service, we diagnose and repair these units on site. When a board is bad, we say so plainly. We do not upsell you a full operator when a $90 relay fixes it.
Automatic Gate Repair
Automatic gate repair in Spring Hill splits into two camps: slide gates at community entrances and swing gates on higher-end properties. Slide gates here tend to fight rack and pinion wear, especially after ice storms load the gate panels and force the operator past its rated torque. Swing gates in older pockets around the 37174 zip code often need control arm replacement or re-welding after years of wind loading. Either way, we diagnose on site, quote the price on the spot, and get your written agreement before we turn a single screw.
Hinge & Post Repair
Spring Hill sits on clay. Heavy clay. After a wet spring, the soil swells and pushes gate posts out of plumb, which means the hinge side of an ornamental iron gate binds and the latch side sags. We fix the post, not just the panel. A gate sags in the hinge post, not in the middle, and that is where we start. Our crew handles Spring Hill Gate Parts & Welding on site, so a broken hinge tab or cracked barrel post gets repaired in your driveway rather than replaced with whatever generic bracket the supply house had in stock. Fix the panel without the post and you will fix it twice.
Gate Realignment
Gate realignment in Spring Hill is often the second visit, after a different company adjusted the hinge bolts and called it done, only for the gate to scrape again six weeks later. We measure the post with a level, check the reveal gap, and re-plumb the post if the soil shifted it. On ornamental iron swing gates around neighborhoods like Benevento East and Wades Grove, a proper realignment usually means cutting the hinge weld, re-setting the post, and re-hanging the gate so it swings true. That is the fix that lasts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Spring Hill
We are certified to service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule, and LiftMaster. The Spring Hill market skews heavily toward FAAC and LiftMaster slide operators from the 2000s construction wave, so those are the boards, loop detectors, and limit switches we carry most. That means less waiting on parts for Spring Hill customers and fewer return trips. We stock specific mid-2000s generation components because we know exactly which operator models went into the HOA builds along Duplex Road, Buckner Lane, and Port Royal Road.
Common Gate Repair Problems We See in Spring Hill Homes
- Loop detectors phantom-triggering on trash days. Most Spring Hill subdivisions use a single loop at the exit lane, and when the asphalt gets repaved or a heavy truck sits over the loop, the detector field swells and the gate opens for no reason. We re-tune the detector, not replace it.
- Frozen operators after winter ice storms. Ice loading on ornamental iron swing gates adds hundreds of pounds of force. Operators not rated for freeze conditions strip their rack and pinion gear or trip the thermal overload. We set freeze-rated torque curves and replace the stripped gear if it has gone too far.
- Clay soil shifting posts out of plumb. The heavy clay around Spring Hill swells with spring rain and shrinks in summer drought, which slowly walks gate posts off-vertical. A hinge post just two degrees out of plumb makes a 400-pound gate scrape and bind. We re-set the post and re-hang the gate.
- Corroded safety photocell relays from decade-long humidity. The humid subtropical air inside a control box condenses overnight, and over ten or fifteen years the relay contacts pit and fail. The gate then refuses to close or reverses mid-cycle. A $40 relay swap usually fixes it, but the big outfits would rather sell you a whole new operator.
Pricing for Gate Repair in Spring Hill, TN
A service call inside the Spring Hill area carries no trip charge, and you will get a written price before any work begins. Here are the ranges we typically quote in Spring Hill:
- Control board replacement: $285-$520
- Loop detector replacement or re-tuning: $145-$260
- Hinge and post rebuild (single post): $350-$800
- Gate realignment (swing or slide): $195-$420
- Rack and pinion replacement (slide gate): $375-$650
- Safety photocell replacement: $160-$285
- Weld repair on ornamental iron: $180-$450 per section
The final number depends on gate weight, access, and whether the post needs re-setting or just realignment. We quote the price up front, in writing, and we do not come back later with a different number. Every Spring Hill job also qualifies for $40 off any repair over $200, and seniors and veterans always get 10% off.
We Also Serve Cities Near Spring Hill
Our Spring Hill crew regularly works in Franklin, Nolensville, Brentwood, and Fairview. If your neighborhood is near the county line or you manage properties across Maury and Williamson counties, we can route a single service day to cover multiple gates. Call (877) 610-2993 and tell us which community you are in. For more on our full coverage area, see Gate Repair in Spring Hill.
Serving Spring Hill, TN - Our Local Coverage Area
We’re based in the Spring Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Spring Hill
Because Spring Hill’s master-planned communities were built in a concentrated wave between roughly 1995 and 2015, and the gate operators installed during that window are now aging out on the same clock. The vast majority of those subdivision entrances used FAAC or LiftMaster slide operators from the mid-2000s. Those control boards, loop detectors, and gearboxes all have service lives in the 15 to 20 year range, and Spring Hill hit that range all at once. It is not that the gates are badly made. They are simply all the same age. Call (877) 610-2993 and we can tell you whether your community’s operator is in that aging cohort.
Yes, and it is one of the most common causes of slide gate repair calls in the 37174 zip code. Spring Hill’s clay-heavy soils expand when wet and shrink when dry, which slowly shifts the steel posts that hold the slide track and guide rollers. A post that moves even an inch changes the track alignment, and the gate starts binding mid-travel. We re-set the post and re-level the track instead of greasing the rollers and hoping. Call (877) 610-2993 and ask for a track and post inspection. The estimate is free.
It is predictable given Spring Hill’s winter ice storms, but it is not something you should live with. Ice loading on ornamental iron adds hundreds of pounds to a swing gate, and that force concentrates on the hinge post and the top hinge barrel. After a few freeze-thaw cycles, the hinge post leans and the gate sags. We re-plumb the post, rebuild the hinge, and set the operator for freeze-rated torque so next winter does not repeat the damage. Call (877) 610-2993 for a same-day assessment.
Yes, and we do it regularly in Spring Hill. The intercom and keypad systems in most HOA entrances are separate from the operator control board, so replacing a dead FAAC or LiftMaster operator does not mean throwing away the call box at the residents’ entrance. We wire the new operator into your existing Gate Access Control in Spring Hill system and test the full sequence: keypad code, intercom call, open command, close timer, safety edge. If any part of that chain is failing, we tell you before we touch anything. Call (877) 610-2993 and describe your current setup.
In Spring Hill, the usual suspect is a loop detector that has drifted out of calibration, often after a road repaving or after years of use without re-tuning. A detector set too sensitive triggers when a truck, trailer, or even a large SUV passes over the loop, treating it as an exit command. We pull the detector settings, test the loop frequency, and adjust the sensitivity to match the traffic that actually uses your lane. If the detector itself is fried, replacement runs $145 to $260. Call (877) 610-2993 for a free second opinion if another company already quoted you a full operator replacement.
What Is Actually Failing on Your Spring Hill Gate
Spring Hill’s master-planned HOA communities were built fast, between roughly 1995 and 2015, and the gate systems went in at the same pace. The developers favored a narrow range of equipment: FAAC slide operators, LiftMaster control boards, and a generation of safety photocells and loop detectors that are now, in 2026, all failing on roughly the same schedule. That means your neighbor’s gate problem and your community’s gate problem are probably the same component. A mid-2000s FAAC board corroded from years of humidity. A LiftMaster loop detector that was never re-tuned after the road got milled and repaved. A hinge post bushing shifted by clay soil after a wet spring.
Our crew got called to a gated entrance in Cherry Grove off Duplex Road where the FAAC slide operator was stalling mid-cycle and the loop detector was phantom-triggering for every garbage truck. We pulled the control board, found the safety photocell relay corroded from years of humidity, and replaced the hinge post bushings that had shifted in clay-heavy soil after spring rains. We reprogrammed the gate operator for freeze-rated torque so the ornamental iron swing gate would stop binding. Two weeks later we were back in the same zip code, swapping an identical LiftMaster board for another HOA a mile east.
That is the Spring Hill pattern. The gates are not breaking because someone installed them wrong. They are breaking because they were all installed in the same decade, and that decade’s electronics are done. When you call (877) 610-2993, the person who answers knows what generation your operator probably is before you even give the address.
Local Knowledge You Can Verify
We are not a franchise and we are not a call center. Hal Gatewood’s name is on the shop, his address is published, and his license number is available to anyone who asks. We have been owner operated since 2001. When you need Gate Repair in Spring Hill, you get a local crew that stocks parts specific to the FAAC and LiftMaster generation installed across this city’s HOA communities. We know that the same handful of regional developers built most of these subdivisions, and we know what equipment they specified, because we have been servicing it since it was new.
Our 90-Day Done Right Promise is in writing on every Spring Hill job. If the gate is not right within 90 days, one call brings us back, no runaround. We also honor a free second opinion on any written estimate from another company, which has saved Spring Hill HOA boards thousands of dollars when a national outfit quoted a full operator replacement for what was really a corroded $40 relay. Show us the written estimate and we will tell you honestly whether it is fair.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Spring Hill and surrounding communities since 2001.