Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Schertz: What It Costs and How Fast We Can Get There
Gate repair in Schertz, TX typically runs $185-$520 for most hinge, post, and opener fixes, and nearly all of our work is completed the same day we arrive. For automatic gate operator replacement, expect $650-$1,900 depending on the brand and whether we reuse your existing keypad and safety sensors. If your gate is binding after rain or the post is tilting, that’s the Blackland Prairie clay moving under 78154, not your gate falling apart. Call (877) 610-2993 and we’ll give you a straight price before any work starts.
Key Takeaways:
- Most Schertz gate failures trace to expansive clay shifting posts, not worn-out hardware.
- Our crews answer live 24/7 and typically reach Schertz homes the same day.
- HOA approval is often required before you touch a gate. We handle the paperwork and coordination.
- Every repair carries the 90-Day Done Right Promise, in writing.
Fast, Reliable Gate Repair Across Schertz
If you live in Schertz, you already know the pattern. The gate works fine through July and August. Then October rain hits, the clay swells, and suddenly the latch won’t catch or the opener groans and trips. We see it every fall along FM 1518, through Fairhaven, and in the newer subdivisions along Cibolo Creek. That’s not a coincidence, and it’s not your operator dying. That’s the soil under your hinge posts moving, and it’s the single most common repair we do in Schertz. Our Gate Repair crew works the 78154 area constantly, and a live person answers at (877) 610-2993 whenever you call.
Hal Gatewood started this company in 2001 and he still runs the jobs with his own two hands. When we show up in Schertz, the person doing the work is the same person whose name is on the invoice. No voicemail trees. No third-party call center. You call, Hal or one of his crew picks up, and you get a real answer about when we’ll be there.
Why Gatewood Fence & Gate Is Schertz’s Preferred Gate Repair Company
Schertz homeowners call us because we repair the gate where it stands instead of hauling it to a shop and selling you a new one. That matters more in 78154 than almost anywhere else. The HOA tells you what the gate has to look like. The clay tells you what the post is going to do. Neither one wants you to swap in a generic replacement. We weld on site, in your driveway, so the gate stays yours and the HOA stays happy.
Our reputation in Schertz is built on showing up when we say we will. Homeowners here have been burned by companies that quote $199 on the phone and hand over a $900 invoice at the door. We don’t do that. The price we quote is the price you pay, agreed before the first wrench turns. And after the job, the 90-Day Done Right Promise covers every repair in writing. If something isn’t right, one call brings us back at no charge. No runaround.
We also know the neighborhoods. We’ve set posts in Fairhaven, realigned gates off Borgfeld Road, and replaced openers in the master-planned sections south of Wiederstein. When we say we know what your gate is going through, we mean we’ve already fixed the same failure three streets over.
Our Gate Repair Services in Schertz
Hinge & Post Repair
The hinge post is where every Schertz gate failure starts. Blackland Prairie clay shrinks during the long hot stretch and swells hard when rain comes back. That movement tilts concrete-set posts out of plumb, and a tilted post drags the gate leaf into the ground or pulls the hinges apart. We dig the footing down to stable soil, reset the post with deeper concrete, and weld any hinge fatigue we find. Fix the panel without the post and you’ll fix it twice. In Schertz, the post is the whole job.
Gate Realignment
A gate that scrapes, sags, or won’t latch in Schertz is almost always a post heave problem. We measure the reveal top and bottom, check plumb on both posts, and determine whether the issue is the post, the hinges, or the frame. Then we correct it. Not with shims and washers, which work for a month and fail again. We reset or weld as needed so the gate closes square. Once the clay moves again, seasonal, it may need a small adjustment, but a properly set post should hold for years.
Automatic Gate Repair
Schertz homes from the 2000-2020 building wave almost all run LiftMaster, FAAC, Viking, or DoorKing operators. When the post shifts, those operators get torqued off their mounting brackets. The arm binds. The limit switches trip. The gate opens halfway and beeps. We service all nine major brands, including Ghost Controls and Elite, and we stock common parts for Schertz so we’re not waiting on a truck from out of state. Most opener faults trace back to the post moving, not the board failing. We fix the root cause, then recalibrate the operator so it runs clean.
Electric Gate Repair
Electric gates need three things: consistent power, clean limit settings, and safety sensors that actually see. In Schertz, the summer heat degrades wire connections faster than in milder climates, and ants love to nest inside control boards. We trace the full circuit from panel to arm, replace burned connections, and recalibrate the travel limits and entrapment protection. If your gate reverses for no reason or stops mid-cycle, call us before the motor burns itself out.
Lock & Weld Repair
HOA communities in Schertz often spec specific lock styles and latch positions. We repair or match the existing hardware rather than slapping on whatever is in the truck, and our on-site welding means cracked frames, broken hinges, and rusted pickets get fixed without removing the gate. We grind the rust, weld the break, and leave it painted to match. If you need a fresh coat on the whole gate, we handle that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Schertz
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Schertz specifically, LiftMaster and FAAC dominate the 2000s-era subdivisions, while Viking and Ghost Controls show up more on newer builds and larger estate lots. We keep common boards, arms, capacitors, and safety sensors in our truck stock for Schertz runs, which means fewer second trips and faster turnaround when your opener fails. If we don’t have the part, we tell you the day it will arrive and when we’ll be back. No guessing.
Common Gate Repair Problems We See in Schertz Homes
- Post heave from shrink-swell clay. Schertz sits on Blackland Prairie soil that shrinks hard in 100°F+ summers and expands with fall rain. That cycle tilts gate posts and is the dominant failure in 78154, especially along the FM 1518 and Cibolo Creek corridors.
- UV-baked paint and dried-out hinges. The Texas sun breaks down lubricants and paint faster here than in shaded, older neighborhoods. Hinges stiffen, welds rust, and iron gates start showing surface corrosion within a few years without maintenance.
- Operators pulled off mounting brackets. When the post moves, the operator gets torqued with it. LiftMaster and FAAC arms pull loose, strip mount bolts, or snap the arm bracket entirely. Recalibrating the operator without fixing the post means you’ll be calling us again in six weeks.
- HOA compliance issues on repair work. Many Schertz subdivisions require architectural approval before you change a gate’s finish, style, or sometimes even repair it. We can help you navigate that paperwork and time the work so your HOA stays out of it.
Pricing for Gate Repair in Schertz, TX
Hinge and post repair in Schertz generally runs $185-$520 depending on how deep we have to dig and whether welding is required. Gate realignment is $150-$350 for most single-swing gates, $300-$650 for double-swing or heavy ornamental iron. Automatic gate operator repairs run $390-$850 when we can fix the existing unit; full replacement with a new LiftMaster or FAAC operator runs $650-$1,900 including labor and safety recalibration. Weld and rust repair is $120-$450 for typical cracked welds or rotted pickets.
What moves the price is the soil and the post depth. A post that has heaved six inches needs a full reset, not a shim. An operator that has been torqued for months may have burned limit switches or a damaged board. We tell you the price after we see the gate, before we start any work. It will not change at the door. Every Schertz customer gets the same standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Schertz
Our crews working out of Schertz also cover Schertz neighbors: Selma, Universal City, Cibolo, and Converse. If your gate is struggling anywhere in that area, the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and we’ll route the nearest truck to you.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Schertz
In most Schertz subdivisions, yes, if the work changes the gate’s appearance, finish, or operator type. Repairs that restore the original look, like resetting a post or replacing a hinge, often don’t require approval, but if you’re painting, changing hardware, or swapping operators, check your HOA’s architectural guidelines first. We regularly coordinate with management companies in 78154 and can tell you what to submit. Call (877) 610-2993 and we’ll walk you through what your neighborhood typically allows.
Because the Blackland Prairie clay under your hinge post swells when it gets wet. The post shifts, the gate leaf drops or lifts, and suddenly the latch won’t catch or the opener starts binding. The fix is resetting the post to stable depth, not adjusting the hinges. We see the same seasonal surge every October along FM 1518 and throughout 78154. Call us after the first rain and we’ll set it before it gets worse.
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we prefer to repair your existing operator rather than sell you a new one. If your LiftMaster or FAAC arm is pulling loose because the post moved, we’ll fix the post first and then recalibrate the operator. Most operators on Schertz gates still have years left once the underlying post issue is corrected.
Entrapment protection is the safety system that stops or reverses the gate if it hits a person, vehicle, or pet. It includes photocells across the gate opening and a clutch or force limiter on the operator. If your Schertz gate was installed after the mid-1990s, it should have some form of it, but many systems installed during the 2000s building boom have failed sensors or bypassed boards. We test the full system on every repair and recalibrate it to current safety standards. A gate without working entrapment protection is a genuine safety hazard to kids and pets, so we address it on every service call.
When the post is set below the active clay zone, usually three to four feet deep with proper concrete, it should last 10 years or more before the soil moves it again. The old footings from the 2000s-era builder installations were often shallow, two feet or less, which is why we’re seeing so many failures now. We set deeper than code minimum because we know what this clay does. The 90-Day Done Right Promise covers us if we miss something on the first pass.
Same day for most repairs. Scheduling is handled from our San Antonio office, but crews serve Schertz directly and keep parts stocked for the common failures we see here. Emergency gate failures, like a gate stuck open or an opener that won’t close, get priority. Call (877) 610-2993 and a live person will tell you exactly when we can have someone at your house.
Contact Gatewood Fence & Gate in Schertz
If your gate is sagging, scraping, stuck open, or your HOA just sent you a letter, call (877) 610-2993. We’ll give you a straight price over the phone and schedule a time that works. Hal Gatewood founded this company in 2001 and his name is on every invoice. His crews work Schertz every week, and they’ll treat your gate like it’s their own. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Schertz since 2001.