Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Leandro
Gate repair in San Leandro comes down to two things: how fast we can get to you and whether the fix holds up against bay salt air. We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop, the invoices, and the 90-Day Done Right Promise we stamp on every job. If your gate sags, jams, or won’t open at all, call (877) 610-2993. A live person answers, day or night.
We know San Leandro’s neighborhoods, its industrial corridors, and the way salt off the bay eats gate hardware faster than almost anywhere else in the East Bay. When you call, you’ll talk to someone who knows the difference between a Floresta ranch gate and a Davis Street commercial slide operator, because we’ve worked on both this week.
Why Gatewood Fence & Gate Is San Leandro’s Preferred Gate Repair Company
Reputation in San Leandro is built one gate at a time, and we’ve been at it since 2001. Homeowners in Washington Manor, Floresta, and the neighborhoods along Bancroft Avenue call us because we fix what other companies want to replace. A sagging hinge post doesn’t mean a new gate. A corroded operator doesn’t mean a full automation swap. Hal welds on site, in your driveway, so your gate stays where it belongs.
Our San Leandro customers regularly mention the same things: the person who showed up was the person they talked to on the phone, the price quoted before work started was the price on the invoice, and if something wasn’t right, one call brought us back. That’s the whole point of the 90-Day Done Right Promise. It’s in writing on every job, not buried in fine print.
Response time to San Leandro is measured in hours, not days. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, with crews serving San Leandro locally. If your gate is stuck open or stuck shut, we treat it like what it is: a security problem and a safety problem. You won’t get a voicemail or a call center. You’ll get Hal or someone from his crew, and they’ll give you a real arrival window.
Our Gate Repair Services in San Leandro
Weld & Rust Repair
This is the heart of gate repair in San Leandro, especially west of I-880 where salt-laden humidity from San Francisco Bay settles on everything. We cut out rotted sections of steel frame, weld in new plate or tube stock, and grind the repair smooth. The result is a structural fix, not a cosmetic patch. If your gate frame has holes, flaking steel, or cracks along the weld seams, it’s past time to address it before the whole panel lets go.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. In San Leandro’s mid-century neighborhoods, original 1960s wrought-iron gates often hang from posts set in footings that have corroded for six decades in bay moisture. We dig out the rotted footing, set a new steel post with proper anchoring, and re-hang the gate so it clears by design, not by luck. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates drift out of alignment for predictable reasons: hinge wear, post movement, soil settlement, or a car tapping the edge. We re-square the frame, adjust hinge pins, and reset the latch so it catches cleanly. In San Leandro’s older tract home neighborhoods, where concrete driveways have shifted over 60-plus years, this is one of our most common calls. A gate that scrapes the concrete is a gate telling you the post has moved.
Electric Gate Repair
Automatic gates in San Leandro fail in patterns we can almost map by ZIP code. West of I-880, operator housings rust through from salt exposure. In the industrial corridor along Davis Street, constant truck traffic wears out rack and pinion drives, wheels, and loop detectors far faster than residential use ever would. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we carry the parts to fix most of them same-visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Leandro
We’re certified to service nine major gate brands, but in San Leandro we see a lot of Viking, DoorKing, and Elite operators. Viking and Elite are common on the heavy industrial slide gates along the waterfront, while DoorKing shows up on everything from Washington Manor driveway gates to commercial properties near the San Leandro Marina. We keep common boards, limit switches, and safety-edge parts stocked for these brands, which means fewer return trips and less waiting. If your operator is from a brand not on our wall, call anyway. After 29 years in the trade, there isn’t much we haven’t opened.
Common Gate Repair Problems We See in San Leandro Homes
- Rusted-through hinge posts and sheared lag bolts. Salt air west of I-880 corrodes post anchors until the lag bolts snap. We see this on residential gates in 94577 and 94578 far more than in drier cities east of the hills. The fix is a new post footing, not just new bolts.
- Slide gates jamming on worn rack and pinion drives. Commercial slide gates along Davis Street and the industrial waterfront run hundreds of cycles a day. The rack teeth wear, the pinion slips, and the gate shudders to a stop. We replace the drive components and adjust the guide rollers so the gate travels true.
- Operator housings rusting through from salt exposure. The motor housing on an automatic gate is supposed to protect the control board and limit assembly. In San Leandro’s western ZIPs, we regularly find housings with holes rotted through, letting moisture into the electronics. A new housing plus internal inspection beats a full operator replacement.
- Mid-century wrought-iron gates sagging at the hinge post. Those 1960s ornamental driveway gates in Washington Manor and Floresta are beautiful and structurally tired. The original footings were poured before modern anchoring standards, and bay moisture has done the rest. We re-set the post and weld the hinge plates so the gate closes like it did when it was installed.
Pricing for Gate Repair in San Leandro, CA
A typical Gate Repair call in San Leandro runs $180 to $340 for hinge adjustments, latch replacement, or track realignment. Weld and rust repair generally falls between $250 and $600 depending on how much steel needs to be cut out and replaced. Hinge post replacement, which includes digging out the old footing and setting a new steel post, typically runs $450 to $900. Electric gate operator repairs start around $225 for limit switch or safety sensor work and can reach $800-plus for control board replacement on commercial operators. Every price is quoted and agreed before any work starts. You’ll get $40 off any repair over $200, no trip charge inside the county, and if you have a written estimate from another company, we’ll give you a free second opinion. Seniors and veterans always get 10% off.
We Also Serve Cities Near San Leandro
Our Gate Repair team covers San Leandro and the surrounding communities: Ashland right across the county line, San Lorenzo to the southwest, Cherryland to the southeast, and Castro Valley up over the hills. If you’re just outside San Leandro proper, call anyway. Chances are we’re already working in your neighborhood, and the no-trip-charge offer inside the county still applies. See Gate Repair in San Leandro for service across all three ZIP codes: 94577, 94578, and 94579.
Serving San Leandro, CA - Our Local Coverage Area
We’re based in the San Leandro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in San Leandro
San Leandro sits directly on the eastern shore of San Francisco Bay, so the prevailing marine layer delivers salt-laden humidity to properties west of I-880 every single night. That salinity oxidizes steel gate frames, hinges, and motor housings far faster than the drier air just a few miles east in Castro Valley. Hinges and actuators that might last 10 years in Castro Valley often fail in 5 to 7 years in San Leandro’s western ZIPs. This isn’t a maintenance problem you caused. It’s geography. Call (877) 610-2993 and we’ll show you what’s corroded and what’s still sound.
Usually yes. Constant truck traffic on Davis Street wears out loop detectors and their wiring much faster than residential traffic patterns, and salt corrosion in the junction boxes compounds the problem. When the loop detector sends erratic signals, the operator thinks something is in the gate’s path and reverses. We test the loop circuit, check the photocell alignment, and replace the failing component rather than bypassing safety features. A gate that reverses on its own is telling you where it’s failing. Call (877) 610-2993 for a free phone diagnosis.
For long residential driveways in San Leandro’s eastern hills without grid power, we recommend solar-ready operators paired with a properly sized battery bank and panel array. The brands we install most often for this application are Ghost Controls and Mighty Mule, both of which offer robust DC-powered swing operators that handle wide gates and long run times. The key is sizing the panel to the duty cycle, not just the gate. Too many solar installs fail because the panel is undersized for winter sun angles and daily cycles. Call (877) 610-2993 and we’ll measure the gate, check your sun exposure, and give you a written recommendation.
In most cases, no. The panel isn’t what failed. The hinge post footing is what failed, rusted through by six decades of bay humidity. We were called to a 1960s ranch in the Floresta neighborhood where the original ornamental wrought-iron driveway gate had sagged so badly it scraped the concrete. Our tech found the lag bolts on the hinge post sheared off at the corroded post anchors, a classic San Leandro salt-air failure we rarely see a few miles east in Castro Valley. After cutting out the rusted post footing and installing a new steel post with proper anchoring, we re-hung the gate, welded the cracked hinge plates, and adjusted the swing so it clears by a full inch. The gate still looked original. It just finally worked. Call (877) 610-2993 and we’ll tell you honestly whether your post can be saved or needs replacing.
Yes. Automatic gates in San Leandro, like everywhere in California and under the federal UL 325 safety standard, must have entrapment protection: at minimum, photo-eyes across the gate opening and a reversing mechanism that responds to obstructions. Commercial slide gates, like those along Davis Street, typically also require contact edge sensors on the leading and trailing edges. Some residential installations may function without a second photo-eye, but not safely, and not in compliance. Show me the gate closing on its own and I’ll show you where it’s failing. Every repair we do includes verifying the safety systems work. Call (877) 610-2993 and we’ll check yours.
Call Gatewood Fence & Gate for Gate Repair in San Leandro Today
If your gate is stuck, sagging, rusted through, or refusing to open, call (877) 610-2993 now. A live person answers, 24/7. You’ll get a straight answer about what’s wrong, what it costs, and when we can get there. Free estimates, upfront pricing agreed before any work starts, and the 90-Day Done Right Promise in writing on every job. Hal Gatewood has been fixing gates since 2001. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Leandro and the East Bay since 2001.