Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Romulus
Gate repair in Romulus, MI typically runs $180-$480 for most hinge, post, and operator fixes, and we can usually have someone at your gate the same day you call. We work on everything from a sagging 1960s ranch-house swing gate to high-cycle commercial slide gates at cargo yards and rental car facilities near Detroit Metropolitan Airport. The crew at Gatewood Fence & Gate knows Romulus well: we’re on Eureka Road, Middlebelt Road, and the I-94 corridor every week. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Romulus’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 with a simple rule: fix the gate, don’t sell a new one. That matters in Romulus because so much of the gate work here is commercial and industrial. A rental car return lot off Goddard Road doesn’t need a sales pitch. It needs a slide gate operating by the morning return rush. We do on-site welding, keep parts for older operators in the truck, and put the 90-Day Done Right Promise in writing on every invoice, not in fine print.
Romulus residents tell us the same story: a national company quoted one price on the phone, then added charges at the door. We don’t work that way. The price is quoted and agreed before any work starts. You’ll see the same face that gave you the estimate, and it’s someone whose name is on the shop. Hal lives here. His shop is down the road. That’s the oldest accountability there is.
Our Gate Repair Services in Romulus
Electric Gate Repair
When an electric gate in Romulus stops responding, it’s often the control board, not the motor. Pre-2000 swing gate operators near I-94 short out from salt spray corrosion that creeps into the board housing. We carry and install boards for LiftMaster, Viking, Ghost Controls, and DoorKing, and we test the full open/close cycle before we leave. If a board is obsolete and can’t be reliably rebuilt, we’ll tell you that plainly and show you what a retrofit costs versus a patch that fails again in six months.

Automatic Gate Repair
Romulus has a gate demand pattern no neighboring city shares. The airport sits directly inside city limits, and the cargo freight yards, logistics warehouses, and long-term parking operators along Eureka and Middlebelt roads run automated gates thousands of cycles a week. We stock commercial-duty rack and pinion parts, limit switches, and safety photocells because we know a residential-grade operator installed at a commercial lot will burn out within 18 to 24 months. The failure is predictable, and we plan for it.

Hinge & Post Repair
Most gate sag in Romulus doesn’t start in the panel. It starts in the hinge post. Southeast Michigan’s freeze-thaw cycling, with temperatures crossing 0°F multiple times each winter, heaves post footings and pulls hinge posts out of plumb. We cut out the old post, pour a deeper footing, and weld the hinges back on site so the gate stays in your driveway. Fix the panel without the post and you’ll fix it twice.

Gate Realignment
A gate that drags on the ground or latches wrong is usually a post that has moved, not a bent frame. We realign gates in Romulus by setting the posts back to true, rebuilding hinge points, and re-hanging the gate so it swings level. For older wood or chain-link gates from Romulus’s 1960s-to-1980s ranch stock, this often means replacing rotted wood posts with steel and reusing the original panel. That’s the repair-first approach.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Romulus
We’re certified to service nine major gate brands, and in Romulus we see a lot of Viking at the rental car and cargo facilities, Linear and Ghost Controls on newer residential operators, and old DoorKing units that have been running since the 1990s. Because we service these brands week in and week out, we keep the common boards, switches, and gears on the truck for fast turnaround. No ordering from a warehouse and hoping it shows up before the weekend. When a gate fails at a freight entrance, waiting three days isn’t an option.
Common Gate Repair Problems We See in Romulus Homes
- Salt-corroded control boards: Road salt spray from I-94 and the airport’s interior service roads gets into operator housings and eats circuit boards. Gates get stuck half-open at the worst possible time.
- Heaved hinge posts: Repeated freeze-thaw cycles in Romulus push post footings upward unevenly. The gate tilts, drags, and the latch stops lining up. A straightening fix without replacing the footing will fail by next winter.
- Sheared limit switches on commercial slide gates: Rental car return facilities near Goddard Road can log over 20,000 cycles in six months. That kills residential-grade limit switches fast. We replace them with commercial-rated parts and add safety photocells to meet UL 325.
- Obsolete keypads and safety edges: Older gates in Romulus were often hung before modern entrapment protection was required. A 1970s swing gate can be retrofitted with a modern keypad entry and a safety photocell without replacing the whole gate, if the posts and frame are sound.
Pricing for Gate Repair in Romulus, MI
Here are the ranges we quote in Romulus. Hinge and post repair typically runs $180-$380 per post, depending on footing depth and whether we’re welding. Gate realignment is usually $150-$300. Electric gate repair, including board replacement, runs $220-$480. Automatic operator repair, especially on commercial slide gates, runs $350-$800 when racks, pinions, or limit switches are involved. Every job carries the 90-Day Done Right Promise. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The price is quoted and agreed before any work starts. Call (877) 610-2993 and we’ll give you a real number over the phone.
We Also Serve Cities Near Romulus
Our Gate Repair crew covers the surrounding Wayne County area, including Wayne, Westland, Inkster, and Taylor. If your gate is in one of those communities, you’ll get the same live-person answer, on-site welding, and written 90-Day Done Right Promise. We’re in Romulus often enough that adding a stop in Wayne or Inkster is usually no trouble at all.
Serving Romulus, MI - Our Local Coverage Area
We’re based in the Romulus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Romulus
It compresses them. Commercial gates at cargo yards, rental car depots, and parking facilities near DTW need to be back in service before the next shift or the next flight departure. We answer the phone with a live person 24/7 and schedule Romulus commercial calls with that reality in mind. For a gate that’s stuck open at a freight entrance, we can usually be there the same day. Call (877) 610-2993 for a same-day assessment.
Yes, if the posts and frame are structurally sound. We’ve done this many times in Romulus’s older ranch neighborhoods, where the original gate is still hanging but the operator is obsolete. A retrofit adds a modern keypad, safety photocell, and in some cases a new controller board, while keeping the original gate. If the hinge posts are rotted or heaved, we address those first. A retrofit is usually cheaper than a full replacement, and we’ll tell you honestly when it isn’t.
Because of cycle count. A slide gate at a rental car return or long-term parking lot off Goddard Road can cycle thousands of times a week. That wears out limit switches, gears, and operator motors on a schedule no residential gate ever sees. When residential-grade parts get installed at a commercial duty cycle, failure comes in 18 to 24 months. We spec commercial parts for commercial gates, and we stock what those lots need. Call (877) 610-2993 for an evaluation.
Yes, and faster than you’d expect. Salt spray from I-94 and the airport’s service roads settles on gate frames, hinges, and operator housings. It accelerates oxidation, especially on steel posts and hinge welds. We see gates in Romulus showing rust damage years earlier than identical gates in inland Wayne County cities. We weld and repair rust-damaged sections on site and treat fresh steel before it’s rehung.
No. A gate sags in the hinge post, not in the middle, and that’s where we start. If the post footing has heaved from freeze-thaw or the post itself is rotting or rusted, straightening the panel is a temporary fix. We rebuild the post and footing first, then realign the gate. That’s the only way the fix lasts past the next winter. Call (877) 610-2993 for an honest assessment of whether your sag is post failure or panel wear.
Call Gatewood Fence & Gate for Gate Repair in Romulus
When a gate fails in Romulus, you want someone who will show up, fix it, and stand behind the work. Hal Gatewood has been at this since 2001, and his name and address are published. The crew works on-site, welds in the driveway, and stocks parts for older Viking, Linear, Ghost Controls, and DoorKing operators. Every job carries the 90-Day Done Right Promise in writing. You’ll get a live person when you call, a free estimate, and a price agreed before any work begins. Call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Romulus and Wayne County since 2001.





Before
After
Before
After
Before
After