Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rodeo
Gate repair in Rodeo typically runs $180 to $520 for common hinge, post, and latch work, and most jobs in Rodeo are completed the same day we arrive. We know the stretch of San Pablo Avenue and the refinery-side streets well enough that our crew can usually reach any home in 94572 within an hour of your call. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still answers the phone himself. Call (877) 610-2993 for a free estimate with the price agreed before any work begins.
Key Takeaways:
- Most hinge and post repairs in Rodeo cost $180 to $520, with electric gate operator work starting around $240.
- We serve all of Rodeo’s 94572 area, including streets immediately adjacent to the refinery.
- Salt fog from San Pablo Bay plus refinery particulates mean standard galvanized hardware fails fast here. We specify corrosion-resistant materials as the baseline.
- Every job carries our 90-Day Done Right Promise in writing, and we offer a free second opinion on any written estimate.
Why Gatewood Fence & Gate Is Rodeo’s Preferred Gate Repair Company
Rodeo homeowners deal with something most gate companies never see: a gate that rusts through at the hinge post while the rest of the panel still looks fine. We have repaired enough gates along Rodeo’s refinery-side streets to know exactly where they fail first, and we bring the right materials the first time. People here have had enough of phone quotes that turn into door surprises. Our price is quoted and agreed before a single tool comes off the truck.
Hal has been at this since 2001, and his name is on the shop and every invoice. That matters in Rodeo, where a lot of the housing stock dates to the 1940s through 1970s and the neighbors still know each other by name. We answer the phone live around the clock, and the person who shows up is someone you could run into at the hardware store tomorrow. We also carry a 90-Day Done Right Promise on every job, in writing. If it is not done right, one call brings us back, no runaround.
We are not a call center three states away. Scheduling for Rodeo is coordinated from our San Francisco Bay Area office, and the crew that arrives knows the refinery corridor, the fog patterns, and what those mean for gate hardware. That local knowledge is the difference between a repair that lasts and one you repeat in eighteen months.
Our Gate Repair Services in Rodeo
Our Gate Repair team handles everything from a sagging swing gate to a dead electric operator. In Rodeo specifically, we emphasize rust repair, hinge and post replacement, and electric gate diagnostics, because that is what the local air attacks first.
Electric Gate Repair
Electric gate operators in Rodeo die in predictable ways. Airborne sulfur compounds from the refinery corridor get into control boards and corrode connections, causing intermittent failures and false photo-eye errors. We repair LiftMaster, FAAC, BFT, Linear, and Viking operators, and we keep common boards and safety edge components ready for Rodeo callouts. If your operator faults every morning when the fog is thick, the board may be corroding more than the wiring.
Automatic Gate Repair
An automatic gate that opens halfway or reverses for no reason is usually fighting a hardware problem, not an operator problem. In Rodeo, it is often a hinge post that has rusted and shifted, binding the gate just enough to trip the operator’s entrapment protection. We trace the issue from the gate leaf back to the post, then to the motor, so we fix what actually caused the fault instead of swapping the operator and calling it done.
Hinge & Post Repair
This is the repair Rodeo calls us for more than any other. A gate sags in the hinge post, not in the middle, and near the refinery and bay, those hinge post footings corrode aggressively. We cut out the rotted post, pour a new footing with stainless anchor bolts, and replace the hinge post with powder-coated aluminum or stainless-equipped steel. Fix the panel without the post and you will fix it twice.
Gate Realignment
A gate that scrapes the driveway or will not latch is often a post that has leaned a few degrees. In Rodeo’s older 1940s-to-1970s neighborhoods, many original posts were never set with adequate concrete or drainage. We reset, shim, and align the gate so it swings clean and latches without force. When we are done, the gate should close as easily by hand as it does under the operator.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rodeo
Our crew is certified to service nine major gate brands, and in Rodeo we most often work on LiftMaster, FAAC, BFT, and Viking operators. We keep common control boards, safety edges, and receiver parts available for these brands so a repair does not stall while parts ship from somewhere else. If you have an older Linear or Mighty Mule unit on a 1970s tubular steel gate, we can usually repair it rather than pushing a full replacement. The gate motor is rarely the first thing to fail here. The hardware around it usually goes first, and we start there.
Common Gate Repair Problems We See in Rodeo Homes
- Rusted-through hinge posts at the footing. Salt fog and refinery particulates collect right at ground level, where moisture sits longest. The post rots at the concrete line while the rest of the gate looks salvageable. We replace the post and footing, then re-hang the original gate whenever possible.
- Seized galvanized hinges and latches. Near the refinery fence-line and along streets west of San Pablo Avenue, standard galvanized hinges can seize and snap in under five years. We replace them with 316 stainless hardware as the default in Rodeo, not an upgrade.
- Corroded electric operator boards and safety-edge faults. Sulfur compounds in the air eat at circuit board traces and connectors. An operator that works fine at noon and faults at 7 a.m. when the fog rolls in is classic Rodeo corrosion, not a broken motor.
- Sagging or dragging gates from leaning posts. Many original 1950s and 1960s gates were set on shallow footings. Decades of wet winters and marine air have shifted them just enough that the gate no longer self-latches. Realignment and re-shimming usually solve it, without any need for a new gate.
Pricing for Gate Repair in Rodeo, CA
What you will pay depends on the problem, but here are the ranges we typically quote in Rodeo. Hinge replacement with stainless hardware runs $180 to $320 per hinge, including labor and the post work if needed. A full hinge post replacement with a new concrete footing and powder-coated post runs $390 to $680. Electric gate operator repairs, including board replacement and safety system recalibration, typically run $240 to $580. On-site weld repair for rusted frames falls between $150 and $400, depending on how much metal we need to cut out and rebuild.
| Repair Type | Typical Rodeo Price |
|---|---|
| Hinge replacement (stainless) | $180 - $320 |
| Hinge post replacement with new footing | $390 - $680 |
| Electric operator repair | $240 - $580 |
| Weld and rust repair | $150 - $400 |
Every quote is agreed before work starts. We do not surprise you at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you have a written estimate from another shop, let us see it. A free second opinion is something we have offered for years.
We Also Serve Cities Near Rodeo
If you are just over the line in Hercules, Pinole, Tara Hills, or El Sobrante, you are still in our regular service area. The same crew and the same 90-Day Done Right Promise applies. We also cover the broader area through our Gate Repair in Rodeo page, so if you live right on the boundary, call and ask. Boundaries do not bother us.
Serving Rodeo, CA - Our Local Coverage Area
We’re based in the Rodeo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rodeo
The hinges fail faster in Rodeo because of a double assault: sulfur compounds and industrial particulates from the adjacent Phillips 66 San Francisco Refinery combine with salt-laden fog rolling off San Pablo Bay to the west. Standard galvanized hinges and latches near the refinery fence-line have been documented failing in under five years, a timeline almost unheard of even a few miles inland in Pinole. That is why we specify stainless or powder-coated aluminum hardware as the baseline in Rodeo. Call (877) 610-2993 and we will tell you what is on your gate right now and what it should be.
For Rodeo, the hardware that lasts is 316 stainless steel hinges, latches, and fasteners, paired with powder-coated aluminum posts or heavy galvanized-and-painted steel. Standard bright zinc or cheap galvanized hardware will rust through in a few years near the refinery. We also recommend installing a small drain hole at the base of tubular posts and keeping the bottom hinge area clear of dirt and debris so moisture does not sit there. The upcharge for stainless is real, but replacing hardware twice costs more. Call us at (877) 610-2993 for a quote with the exact hardware spec.
Yes, it is very common in Rodeo, and it is usually not a broken photo-eye. What we typically find is that the hinge post has rusted and shifted just enough that the gate drags or binds, which trips the operator’s entrapment protection and shows up as a photo-eye error. The board may also have corrosion from airborne sulfur compounds. We check the gate’s mechanical movement first, then the safety system, then the board. That order saves our Rodeo customers money. Call (877) 610-2993 and we will walk you through it.
If your gate sits within a half mile of the refinery fence-line or directly exposed to bay fog, have it inspected every 12 to 18 months. The failure modes here are fast: a hinge post that looked solid last spring can be rusted through at the footing by the following winter. An inspection catches loose hardware, early corrosion, and operator wiring issues before the gate drops or the board fails. We inspect what we can without recommending work that is not needed. Call (877) 610-2993 to schedule.
We can usually repair it, and in most cases that is what we recommend. The chain-link mesh itself is often still serviceable even after the posts, hinges, and latches have rusted out. We replace the failed hardware in stainless or powder-coated aluminum, reset the posts with proper concrete, and re-hang the original gate. It keeps the look of the house and costs less than a full replacement. We will only suggest replacement when the frame itself is rusted beyond safe welding. Call (877) 610-2993 and we will give you a straight answer.
Call Gatewood Fence & Gate for Gate Repair in Rodeo
If your gate is sagging, dragging, or the operator is faulting every morning when the fog rolls in, call us. Hal Gatewood answers the phone, and he will tell you straight what he thinks before he ever sends a crew. We repair what can be repaired, we weld on site, and every job carries our 90-Day Done Right Promise in writing.
Call (877) 610-2993 for a free estimate. The price you are quoted is the price you pay. No surprises at the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rodeo, CA since 2001.