Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Richland Hills
Gate repair in Richland Hills usually costs between $140 and $380 for common fixes like hinge replacement, post reset, and gate realignment, with electric gate operator repairs running $180 to $450 depending on the control board and motor. Most jobs in the 76180 zip code are finished the same day we arrive, and we answer the phone with a live person 24 hours a day at (877) 610-2993. If your gate sags, won’t latch, or the opener stopped responding, you’re looking at a repair we’ve done hundreds of times in Richland Hills – and one we’ll quote before we touch a single bolt.
Richland Hills is one of the smallest incorporated cities in Texas at roughly 1.7 square miles. That means we know every street, every block, and most of the original ranch homes that still have their first gate hanging on the fence line. Hal Gatewood started this company in 2001, and his name is on the shop. When you call about a gate problem in Richland Hills, you’re talking to someone who treats your gate like it belongs to a neighbor – because it does.
Why Gatewood Fence & Gate Is Richland Hills’s Preferred Gate Repair Company
We’ve been fixing gates in Richland Hills long enough to know the difference between a hinge that needs tightening and a post that’s done for. The black clay under this part of Tarrant County moves constantly, and when it moves, it takes gate posts with it. A repair that simply swaps hardware and walks away leaves you calling again in eight months. We don’t do that. We re-set the post, re-plumb it, and then we talk about the hinge.
Hal has lived and worked in this area since 2001. The address is published. The license number is published. His phone number gets answered by a person, not a queue, at any hour. If you’re in Richland Hills, you’ve likely seen our trucks on Rufe Snow Drive or Baker Boulevard. People who’ve hired us once tend to hand our number to the neighbor whose gate is doing the same thing theirs was.
Our Gate Repair crew doesn’t upsell replacements. We weld on site, in your driveway, and if a used gate can be made right with a new hinge post and fresh hardware, that’s what we do. The 90-Day Done Right Promise is stamped on every invoice: if it’s not right, you call, and we come back.
Our Gate Repair Services in Richland Hills
Hinge & Post Repair
This is the most common call we take in Richland Hills. The expansive clay soil under 76180 heaves with every wet-dry cycle, and a 4×4 cedar post set 40 years ago doesn’t stand a chance. We dig out the old footing, set a new post in concrete at a proper 24-inch depth, and replace the hinges with hardware rated for the gate’s weight. No shims, no quick fixes. Fix the post once and the hinge stops binding.
Gate Realignment
A gate that drags on the ground or won’t reach the latch is almost always a plumb problem. We see it all over Richland Hills, on Labadie Lane, Scruggs Drive, and Baker Boulevard alike. We re-plumb the gate, adjust the reveal, and set the latch so it catches clean. If the post heaved, we address that first – realigning a gate on a leaning post is wasted effort.
Electric Gate Repair
Automatic gate openers in Richland Hills are often older units that predate current UL 325 safety standards. Intermittent opens, dead keypads, and photo beams that quit in the heat are classic symptoms. We service LiftMaster, FAAC, BFT, Linear, Viking, and several other brands, and we stock common boards and safety photocells so we can usually complete the repair in one trip.
Automatic Gate Repair
When an automatic gate stalls mid-travel, the issue is rarely the motor alone. We check the track, the wheels, the rack and pinion, the limit switches, and the operator force settings. Warped wooden frames from freeze-thaw cycles bind against the slides, and the motor burns out trying to push through it. We fix the alignment first, then the operator. It’s the only order that holds up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
We work on gates built around FAAC, BFT, Linear, and Viking operators frequently in this area. Richland Hills has a lot of original 1990s and early 2000s automatic openers still in service, and parts for those older units aren’t always on a shelf at the big box stores – but they’re on a shelf at our shop. We keep boards, remotes, safety edges, and photocell pairs on hand for the brands we service most around here, which means faster turnaround for 76180 homeowners and no waiting on a three-day freight shipment for a part your gate can’t run without.
Common Gate Repair Problems We See in Richland Hills Homes
- Post heave from black clay soil. Tarrant County’s shrink-swell clay pushes gate posts out of plumb every time the ground gets wet and then dries. The first sign is usually a latch that used to catch fine but now misses by half an inch.
- Rot below grade on original 1950s and 1960s posts. The post looks fine above the dirt, but it’s been standing in clay for decades. We probe the base, and when it’s spongy, re-setting a new post saves the whole gate.
- Obsolete control boards without modern safety photocells. Pre-2000 operators in Richland Hills often have dead safety beams and intermittent operation. Many can be retrofitted with new photo-eye pairs and programmed to current standards.
- Warped wooden frames from extreme heat and hard freezes. Triple-digit summers dry the wood, freezes crack it, and the frame twists just enough to bind the gate. Sometimes a steel frame insert and new slats fix it; sometimes the wood has simply served its time.
Pricing for Gate Repair in Richland Hills, TX
In Richland Hills, hinge replacements and basic latch repairs typically run $140 to $220. A full post reset with new footing runs $260 to $380 depending on post size and access. Gate realignment service is generally $160 to $280. Electric gate operator repair falls between $180 and $450, with common control board replacements around $220 to $320 and new safety photocell pairs around $90 to $150 installed. We quote the job before any work starts. The price we give you is the price on the invoice. If you’ve already got a written estimate from another company, we’ll give you a free second opinion on it. Seniors and veterans get 10% off, every job. And any repair over $200 comes with $40 off. No trip charge inside the county.
We Also Serve Cities Near Richland Hills
If you’re just outside 76180, we serve North Richland Hills, Watauga, Hurst, and Haltom City with the same service and the same promise. The soil doesn’t change at the city line, and neither does the way we fix a gate.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Richland Hills
The gate didn’t sag in the middle – it sagged at the post. Richland Hills sits on expansive black clay that heaves with every wet-dry cycle, gradually shoving cedar gate posts out of plumb. When the post leans, the hinge line drops and the gate sags even if every hinge bolt is tight. The fix is to remove the post, pour a proper concrete footing, re-set it plumb, and then re-hang the gate. Tightening hardware alone brings you back within one rainy season. Call (877) 610-2993 and we’ll come take a look – no charge for the trip inside the county.
Yes, in most cases. Older operators – even many from the 1990s – can accept a new safety photocell pair and updated control logic that meets current UL 325 standards for entrapment protection. We did exactly that on Labadie Lane not long ago: a 1963 ranch had a photo-eye that hadn’t worked in years, and we re-wired a new safety pair and reprogrammed the LiftMaster operator. The gate has stayed true through two wet seasons since. That said, if the board itself is burned or intermittent, replacing just the photocells won’t help – we’ll show you the issue and give you a straight quote either way.
That depends on what’s below the soil line. We frequently find posts in Richland Hills that are solid for the top two feet and hollowed out underground. If the post is sound and the deck is still sturdy, re-setting it in a new concrete footing makes it last another 15 to 20 years. If the post is rotted below grade, we replace it with a treated post or steel, re-set in concrete, and re-hang the gate. The decision comes down to what we find when we dig – and we’ll show you before we do anything.
Heat makes electrical components behave differently. Old capacitors drift, solder joints crack, and thermal overload cutoffs trip earlier when it’s 105 outside. In Richland Hills, we see this pattern every summer on older operators: the gate works in the morning and quits by 2 p.m. The usual culprits are a failing capacitor or a control board that’s heat-sensitive. We can test the cap and board on site, and in most cases the repair is done same day. Call us at (877) 610-2993 and we’ll schedule a time – a live person answers.
For a repair like replacing a control board, hinges, or a safety photocell, no permit is needed in Richland Hills. Repairs that restore the gate to working condition don’t require a trip to city hall. If a post needs to be re-set or an entire gate replaced, that’s also considered a repair in most cases – but if you’re adding a new gate where none existed or changing the layout, the city may want a look. We’ll tell you exactly what Richland Hills requires before any work starts, so there are no surprises.
Call Gatewood Fence & Gate for Gate Repair in Richland Hills
If your gate sags, your opener quit, or the latch hasn’t caught right in weeks, call us at (877) 610-2993. A live person answers, day or night. We’ll give you an honest, upfront price, and we’ll fix the gate in your driveway – not haul it off and upsell you a replacement. Hal Gatewood’s name is on the shop and on the invoice, and the 90-Day Done Right Promise is in writing. Richland Hills is down the road from us. We treat it that way.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Richland Hills with honest gate repair since 2001.