Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Phoenix
Gate repair in Phoenix usually means one of three things: a gate that binds in the afternoon heat, a hinge post pulling out of a block wall, or an operator that stopped listening to the remote. We fix all three, and we do it in your driveway, not in some warehouse across town. If your gate is sagging, dragging, or refusing to latch, call (877) 610-2993 and a live person answers. Not a voicemail. Not a call center somewhere in another state. Someone who knows the difference between a Coronado block pilaster and an Arcadia wood post, because we work on both every week.
Why Gatewood Fence & Gate Is Phoenix’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and the name is on the door and on every invoice. We’re not a franchise with a rotating crew. Hal is the person you’ll talk to when you call, and he’s the one who shows up to look at your gate. We publish our address and license number, and we’ve been fixing gates in Phoenix long enough that our reputation walks into the hardware store before we do. When a customer in Alhambra tells a neighbor about us, they’re telling them about a real person who lives in this valley.
Phoenix homeowners call us because we answer the phone around the clock and because we do what we say we’ll do. Every job, from a hinge repair in Maryvale to a full operator retrofit in Encanto, carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround, no “that’s not covered” conversation. Our standing offers are simple too: $40 off any repair over $200, no trip charge inside Maricopa County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We don’t haggle, and we don’t change the number when we get to your house.
We know Phoenix’s older neighborhoods intimately. The block-wall homes in 85006 through 85009, the 1950s ranch houses near Central Avenue, the gated pool enclosures that state law requires to latch every single time. When we roll up to a house in the Central City ZIP codes, we already know what we’re likely to find before we even step out of the truck.
Our Gate Repair Services in Phoenix
Electric Gate Repair
Electric gate repair in Phoenix typically runs $180-$420, depending on whether we’re replacing a photo-eye sensor, swapping a failed control board, or rewiring a keypad. The heat here kills electronics faster than most places. A control board that bakes at 150°F inside a metal housing every summer afternoon has a shorter life than the same board in a mild climate. When your opener just hums and does nothing, or the gate starts and stops halfway, we diagnose it on site and tell you honestly whether the board is worth saving or whether a retrofit makes more sense.
Automatic Gate Repair
Automatic gate repair covers the whole system: the motor, the arm, the track, the sensors, the receiver. In Phoenix, a typical automatic gate repair runs $220-$650. Older LiftMaster and Linear operators from the 1990s and early 2000s are common around central Phoenix, and many of them are now obsolete, meaning the factory no longer makes the control boards. We still repair them when we can, and when we can’t, we tell you straight: retrofitting a modern operator onto your existing gate often costs less than chasing an obsolete board that’s been out of production for a decade. Our Gate Repair team handles everything from a simple remote reprogram to a full motor replacement, same day in most cases.
Hinge & Post Repair
This is the repair we see more than any other in Phoenix. Hinge and post repair typically runs $200-$500, and the failure is almost always the same: the gate’s weight, combined with caliche soil heave, pulls the hinge anchor bolts right out of the CMU block. You can’t just tighten a loose bolt here. You have to drill out the old anchor, clean the hole, and epoxy-set a new one with a threaded rod that actually bites into the block. We weld on site, we set new anchors, and we don’t just patch the symptom. If the post is cracked through, we’ll show you and talk about whether a replacement post makes more financial sense than another repair a year from now.
Gate Realignment
Gate realignment in Phoenix runs $150-$350. When a gate hangs out of plumb, the problem is rarely in the middle of the gate. It’s in the hinges, the post, or the concrete footing. We fix the anchor point, then realign the gate so the latch catches clean and the operator isn’t fighting a bind, which is what kills motors early. A properly realigned gate swings with one hand and latches with a click, not a slam.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Phoenix
We service nine major gate brands, and we carry local parts stock for Phoenix customers, which means we’re not waiting on a truck from California to finish your repair. DoorKing operators are common on commercial and larger residential properties around Phoenix, and we repair them regularly. Linear boards and remote systems show up all over the older neighborhoods. We also work on Ghost Controls and Viking openers, both of which we see in newer high-end installs around the Biltmore and Arcadia areas. If you don’t know what brand your operator is, that’s fine. We’ll figure it out when we open the housing.
Common Gate Repair Problems We See in Phoenix Homes
- Thermal binding. A steel gate expands in 115°F heat and starts rubbing the frame or the latch post by mid-afternoon. The same gate swings freely at 7 a.m. We see this constantly from May through September, and the fix is usually a realignment with proper expansion clearance, not a new gate.
- Hinge anchor pullout from CMU pilasters. Central Phoenix’s block walls sit on caliche soil that heaves with moisture changes. The hinge bolts work loose, the gate sags, and every opening scrapes the walkway. Drill-and-epoxy anchors are the real fix. A lag bolt into a cracked block is not.
- Monsoon wind damage. A 60+ mph gust hitting a solid-panel driveway gate acts like a sail. Hinges shear, rack-and-pinion drives strip, and the gate ends up on the ground or hanging from one hinge. This is a predictable annual failure cycle in Phoenix, and we brace and reinforce gates so the next storm doesn’t repeat it.
- Worn operators with obsolete control boards. Many Phoenix homes still run operators installed in the 1990s. The motor may be fine, but the board is dead and you can’t buy it new anymore. We either find a compatible retrofit or get you into a modern unit, and we’ll tell you honestly which is cheaper before we touch anything.
Pricing for Gate Repair in Phoenix, AZ
Gate repair in Phoenix generally runs between $150 and $650 for most residential jobs. A simple hinge tightener or latch adjustment might be at the low end. A full automatic operator replacement or a major weld repair on a wrought iron gate could push toward $800 or more. The big variables are the type of operator you have, the condition of your hinge posts, and whether we’re fixing the symptom or fixing the root cause. We quote the price to your face before we start, and that price doesn’t change when the job is done. The estimate is free. The second opinion on any written estimate from another company is free too. Call (877) 610-2993 and we’ll give you a real number, not a range so wide it means nothing.
We Also Serve Cities Near Phoenix
Our crew works throughout central Phoenix and the surrounding valley. We serve Encanto, Alhambra, Central City, and Maryvale, plus the neighborhoods in between. If you’re looking for Gate Repair in Phoenix, we’re already in your area. Same crew, same live person answering the phone, same warranty on every job.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Phoenix
Your gate is expanding in the heat. Steel and wrought iron grow measurably when surface temperatures climb past 140°F, which happens most afternoons from May through October in Phoenix. The gate binds against its frame or latch post. Overnight it contracts and swings free again. The fix is a realignment with the right expansion gap, and for some gates, a hinge adjustment. This is one of the most common repairs we do in Phoenix, and it’s rarely a reason to replace a gate. Call (877) 610-2993 and we’ll confirm it in person, usually the same day.
Yes. Arizona Revised Statutes § 36-1681 requires pool barrier gates to be self-closing and self-latching at all times. A gate that won’t latch on its own is a code violation, whether or not you’ve received a citation yet. Given how many Phoenix homes have pools, a huge portion of our gate repair calls carry this legal urgency. A homeowner whose gate “just sticks a little” often books immediately because the alternative is a city fine. We fix the latch and the self-closing mechanism so you’re compliant, and we test it with the gate in full sun, which is when the problem usually shows up. Call (877) 610-2993 and we’ll make it latch right.
The hinge post has likely pulled loose inside the block wall. In Phoenix’s central ZIP codes, most older gates are anchored into concrete masonry unit pilasters, and caliche soil movement under the wall gradually works those anchor bolts out. The hinges themselves can look perfect while the post connection is failing. We drill out the old anchors, epoxy-set new threaded rod into solid block, and re-hang the gate from a post that actually holds. If you just re-tighten the visible bolts, you’ll be calling again in six months. Call (877) 610-2993 for an exact quote, and we’ll show you the failure before we fix it.
In most cases, yes. Older operators from LiftMaster, Linear, and similar brands can often accept current photo-eye sensors and edge sensors, bringing the system up to UL 325 entrapment standards. But there’s a limit. If the operator’s control board is obsolete and won’t communicate with modern sensors, retrofitting starts to cost more than a new operator. We’ll tell you which situation you’re in before any work is done, and the quote is firm. Call (877) 610-2993 for a free evaluation.
Monsoon gusts over 60 mph hit a solid-panel driveway gate like a wall of wind, shearing hinges and stripping rack-and-pinion drives. The gate acts as a sail, and the weakest connection point fails first, usually where the hinge meets the block pilaster. We can reinforce hinge points, add wind bracing where it makes sense, and inspect the whole swing path so the next storm doesn’t put your gate in your neighbor’s yard. Call (877) 610-2993 and we’ll harden what you’ve got.
Gate Repair in Phoenix, Done the Way It Should Be Done
Your gate is the first thing a visitor touches at your house, and in Phoenix it’s also a legal requirement if you have a pool. When it fails, you need someone who answers the phone, shows up when they say they will, and fixes the actual problem instead of selling you a replacement you don’t need. That’s how we’ve been working since 2001. Hal’s name is on the shop, the shop is in Phoenix, and the 90-Day Done Right Promise is in writing on every single job. Call (877) 610-2993 for a free estimate. A live person answers, day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Phoenix since 2001.